Going Home to Momma with the Leica M7…. Film Photography Returns!


Ahhh… It Feels So Good!

Rollei IR400 Film - Leica M7 50mm Lux - Rodinal 1-50

Spring in the South…  Rollei IR400 Film – Leica M7 50mm Lux – Rodinal 1-50

Oh my, I do NOT know where it came from but I got the BUG again for more film photography!  I have a cabinet here in the Gallery just full of old film cameras plus a Leica M7 film body that works with ALL OF MY M MOUNT LENSES!  (see the last post HERE for more info on the lenses).  I decided to purchase a new stock of several films:

  • Kodak Tri-X 400, Ohh
  • Eastman Double X 200, Ahh
  • Rollei IR400  400, WOW!
  • Kodak Tmax, Ho hum…
  • Ilford HP5+ 400
Rodinal One Shot

Rodinal One Shot

I picked up some stainless 2 roll developing tanks with a bunch of Hewes (don’t skimp on your reels, buy the best!) Stainless Steel 35mm Reels.  For developing I like Rodinal One Shot due to its ease of use and a life span of around 40 years.  I simply mix it one tank at a time usually at a 1:50 ratio with water using a small syringe. It allows a very wide latitude of contrast and iso control.  I have used several other developers but I keep coming back to Rodinal!

Now, I am playing with several cameras. As I said my main and BEST camera is my Leica M7.  But here is a current list of those cameras I am using:

  • Leica M7 with Leica & Voigtlander Lenses
  • Petri 7s, 1962 
  • Olympus XA
  • Olympus 35 RC 
  • Shen Hao 4×5 Field Camera (about 12 years old)
1962 Custom Petri 7s Film Body

1962 Custom Petri 7s Film Body

The Petri 7S has been in my hands since 1962 and still shoots great ( I did send it off to have the light seals replaced and a new leather covering ). The Petri has no batteries but rather a solar cell around the lens that drives a needle exposure meter that you simply place into its center notch for a good image!

All of the cameras in my list above have proven reliable  but with the Petri you get a link to the past, specifically MY past as this was my 2nd camera I owed when I was young!

The Olympus 35 RC is an amazing small rangefinder with very nice controls.  It is smaller then the Petri 7s and actually has better control functionality.  It does require a battery to run its metering system though which is a step down from the Petri 7S in my opinion.  The nice thing other than the size is the fact that EVERYTHING is displayed inside of the viewfinder.   Unlike a refurbished Petri 7S which can be found for around $100 used on Ebay, the Olympus 35 RC camera refurbished is demanding around $250!  This is a big difference in price and tells you a lot about its quality and demand! I was lucky to find one from a collectors inventory that he sent off to be totally refurbished and re-skinned for much less than $200.00!  For you film shooters out there on a budget this is the camera that I recommend if you find yourself desiring a rangefinder.

My Custom Olympus 35 RC

My Custom Olympus 35 RC

The Olympus XA was a 35mm rangefinder camera built by Olympus of Japan. It was one of the smallest rangefinder cameras ever made, together with the Contax T.

Olympus-XA

Olympus-XA

It was designed by Yoshihisa Maitani who had joined Olympus Optical Co Ltd in 1956. He was the chief camera designer and managing director of Olympus Optical Co Ltd., having developed a number of legendary cameras during his career. These included the Pen series, the OM series, the XA series, the IS series and the [mju:] series of cameras.

The original model, the XA, was sold from 1979 to 1985. The original XA features true rangefinder focusing, a fast 35mm f/2.8 lens, and aperture prioritymetering. The lens was protected by a sliding dust cover.

This is the smallest 35mm rangefinder ever made.  It will fit in the palm of my hand and will make a great system to have with me everywhere I go!

The Leica M7 uses batteries and sports a center weighted spot meter measured either off the film or off the shutter.  I find that it meters very reliable. It is the top of the heap when it comes to 35mm film cameras.  There are a lot of high end rangefinder cameras on the market but the Leica is the top.  I really excels in the area of long exposures with either a count down timer  in the viewfinder for images metered and controlled in the aperture priority mode or a count up timer for exposures done in the bulb mode.  In bulb, it will count up to 16 min then stops counting for battery conservation, but will continue exposing until you release the remote shutter release.  It will use NO battery power after the 16 min count up timer turns off until you release the shutter then it requires a pulse of electricity to close the shutter.   NO other rangefinder can say this unless you use a pure mechanical camera like a Leica M2 which has no metering system at all.

The Leica M7 is surprisingly heavy but easy to handle.  I keep reading about other high end rangefinder bodies out there but when you do the comparison of features I always come back to the M7.

My Leica M7 Film Body

My Leica M7 Film Body

All of my cameras are fun to use and reliable.  With the Leica M7 you get the world class glass but with the Petri 7S you get a link to the past, specifically MY past as this was my 2nd camera I owed when I was young!  The Olympus 35 RC is an advanced rangefinder from the 1970 era and is slick and fun to shoot. You will see examples from these cameras towards the end of this post!

______________________________________________________

I usually develop my negatives on Sundays.  I have a film drying cabinet that I use to dry the film without dust spots overnight.  I then will scan the negatives on Monday or Tuesday using a Nikon 4000 ED film scanner at 4000 dpi into the DNG format for editing and cleaning later in the week.  I usually shoot 2 or 3 rolls a week.

Rollei IR400 Film

Rollei IR400 Film

My favorite film is Rollei IR400.  This is available at the big camera stores like Digitaltruth, Freestyle and B&H.  What makes this film so special is the fact that is very much like Kodak Tri-X 400 as shot.  It has a VERY THIN film base which really makes scanning easy.  BUT the most amazing thing about this film is that it is sensitive to INFRARED!  If you place a Hoya R72 IR filter on the camera lens the film will record 720nm IR images!  There is an ISO hit due to the filter being so dark down to 12 ISO but it is worth it being able to shoot in both normal B&W and IR B&W!

Next I like the Kodak Tri-X 400 film.  It gives great contrasts and has a very wide latitude in development.  It is well known and tested and for ultra long exposures.

Eastman Double X 5222

Eastman Double X 5222

Then comes Eastman Double X Cinema film.  This is a GREAT B&W film that gives a very smooth gradation and lovely warm tonality with slightly increased contrasts.  This is motion picture film so unless you are going to buy a 400 foot reel you will need to purchase it from the store at Film Photography Project. They will sell it in either 24 exposure rolls or a 100 foot bulk loader roll.  It develops nicely in Rodinal at 1:60 for ISO 200 but there are ratios for 100 up to 800 ISO!  This film is very much worth experimenting with.

I need to say a few words about the folks at Film Photography Project.  They offer  an amazing wide selection of films and old cameras!  This includes Polaroid cameras and film also!  Their Podcast is amazing and I find that it is so good that I now have it running all day while I am working at my gallery in Pawleys Island.  Good Stuff, check them out here:  Film Photography Project.

Whatever film you decide to use you will be pleased with the results. Processing is easy to do with a VERY small investment. You will need:

  • Film Camera
  • Film
  • Chemestry:  Developer, Stop (you can use water), Fixer and water bath with a Wetting Agent.  $40 to get started
  • Film drying hanger clips $3 for a bag of 2
  • Film tank, either stainless steel or a Peterson. Peterson tank and reel is about $40
  • Film tank reels (if stainless do not skimp on these).  Hewes Steel are about $25 each
  • Dark changing bag to move the film from the canister to the developing tank.   $40
  • You will also need some way to scan your film into a digital image or pay someone to do it for you.

That is it.  It normally takes me about an hour to develop 2 rolls.  I will let them dry for several hours then cut them into strips of 6 and put them into plastic storage sheets.

For scanning, as I said above, I use a Nikon 4000ED film scanner.  As you can guess from the name it will scan at 4000 dpi and has a lot of adapters for different types of film scan feeders.  It has slide auto feeders, single slide feeders, a 6 position film rail for troublesome film and an automatic roll feeder to scan entire rolls automatically.  If you couple this with VIEWSCAN software you have an amazing scanning system that rivals those that pro labs use!

Nikon 4000 ED system

Nikon 4000 ED system

Ok, lets take a look at the results of 3 types of film in 2 cameras!

Pawleys Pier  M7 Elmarit 28  Rollei IR400 film in Rodinal at 1:50

Pawleys Pier M7 Elmarit 28 Rollei IR400 film in Rodinal at 1:50 240 second exposure

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

Eastman Double X Film - 1962 Petri 7S  - Rodinal 1-50

Eastman Double X Film – 1962 Petri 7S – Rodinal 1-50

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

Rollei IR400 Film - Leica M7 50mm Lux - Rodinal 1-50

Rollei IR400 Film – Leica M7 50mm Lux – Rodinal 1-50

Rollei IR400 Film - M7 28mm Elmarit - Rodinal 1-50

Rollei IR400 Film – M7 28mm Elmarit – Rodinal 1-50

Rollei IR400 Film - M7 50mm Lux - Rodinal 1-50 240 second exposure

Rollei IR400 Film – M7 50mm Lux – Rodinal 1-50 240 second exposure

Rollei IR400 Film with R72 IR Filter - M7 50mm Lux - Rodinal 1-50

Rollei IR400 Film with R72 IR Filter – M7 50mm Lux – Rodinal 1-50

 

Rollei IR400 Film - M7 50mm Lux - Rodinal 1-50

Rollei IR400 Film – M7 50mm Lux – Rodinal 1-50

I hope that you enjoyed this post and its associated images.  I have been using film since I was 9 years old.  At 13 I had my first darkroom at home.  I worked in film in my own darkroom until I was 18 when that period of my life can to an end.  42 years later I re-engaged film photography again and cannot help but ask “Why did I wait so long?”  I have been shooting digital since my career at Eastman Kodak when you could ONLY get B&W digital camera systems!  I have spent fortunes on digital and have loved every moment of it.  Film will NOT take any of that away, I still have digital and continue to use it.  But I have to be honest and admit that working in film again fills me with a sense of peace that I have not experiences in a very long time….

Please let me know what you think of this post!

Advertisements

Leica M240 Digital..


Oh, No… Another Camera System…

Leica M240 24 mpx Digital

Leica M240 24 mpx Digital

Well, in a wild turn of events I have picked up some new camera equipment… This is a really no surprise as it is a sickness or rather addiction!   But onward and upward!  

I do have to tell you that I am REALLY excited over acquiring these new systems though.   And unfortunately, one thing has let to another and thus a long journey has also been started into the realm of film again!

But first let me highlight the “What”!

As you can see in the top image, the newest body is the new Leica M240 24 full frame 24 mega pixel body.  It also has a true “live view” which allows use of all sorts of other lenses like the Leica R series that you would NOT normally be able to focus.  This means everything from long telephotos to true macro (subject of the next post!). After a few months of use I can tell you that this is the BEST digital system that I have ever used!  Along with it I also picked up several lenses.

Leica 50mm Summalux ASPH f/1.4

Leica 50mm Summalux ASPH f/1.4

First, the main lens is the Leica M 50mm f/1.4 Summalux ASPH lens in silver.  This is a HEAVY lens.  If attacked by a bear I could use it to beat him half to death.  The lens itself has turned into my main lens that I use 60% of the time. It has a built in leans hood and takes 46mm filters.  The Bokah that this lens can generate is amazing beyond description. It is extremely smooth and easy to use and generates images that are truly amazing!

Tulip at f/1.4, Leica 50mm Summalux ASPH

Tulip at f/1.4, Leica M240 w/ Leica 50mm Summalux ASPH

 

Leica 28mm Elmarit ASPH

Leica 28mm Elmarit ASPH

The next lens is the Leica M mount 28mm f/2.8 Elmarit ASPH.  This is a TINY light lens that takes 39mm filters.  These smaller filters sized considerably cut the cost of purchasing top of the line B+W filters.  Since the M240 camera is a full frame sensor the 28mm really is 28mm! The lens is sharp beyond words and quick to focus.  I am really please with this lens and use it for landscapes and lightning photography when mounted on my Fuji X-T1 camera.

The example image for this lens below is a texture overlay.  The main image was an Infrared image taken by placing a R72 (720nm) infrared filter on the lens giving a white IR image of a palm leaf, then doing a texture overlay of colored flowers.

 

M240-1916-Palm Overlay-2014 in both 720nm Infrared and Color

M240-1916-Palm Overlay-2014 in both 720nm Infrared and Color

 

Leica Macro-Elmar-M 90 mm f/4

Leica Macro-Elmar-M 90 mm f/4

The next lens is the Leica Macro-Elmar-M 90 mm f/4 and its macro adapter with split image view.  This is a very unique lens in that it collapses for storage.  By itself it is a great 90mm lens and has proven useful for mid range subjects as well as for Infrared work with the addition of a R72 IR filter.  When you add its macro adapter (extension tube coupled to a viewfinder modifier) it will then give you macro capabilities down to a 1:3 image ratio!  Below is an example of a macro image shot with this lens last week at Moore Farms in Lake City .

Leica Macro-Elmar-M 90 mm f/4

Leica Macro-Elmar-M 90 mm f/4

Now, I already had my two Voigtlander M mount lenses that I was using with the Fuji systems, but they are M mount!

Voigtlander 75mm f/1.8

Voigtlander 75mm f/1.8

First is the Voigtlander Heliar 75mm f/1.8 Lens.  This is an amazing lens that is very fast at f/1.8. The focus is smooth and long and it works very well with M mount extension tubes for true macro work (1:1 image ratio).  I do have 3 of the 10mm extension tubes for it as well as a Canon 500D closeup lens.  For my really small stuff this is my goto lens.  It is a little long but has a very nice clam on lens hood.  While it is NOT a Leica lens it is very close in terms of quality and ease and the f/1.8 aperture gives lovely bokah!

Here then is an example of a 1:1 life-size macro shot with it!

Green Dots...

Green Dots…

Voigtlander 12mm Ultra Wide Hellar

Voigtlander 12mm Ultra Wide Hellar

The last lens that I am going to talk about here is the Voigtlander Ultra Wide-Heliar 12mm f/5.6 Aspherical M Mount lens.  Another heavy all metal lens with remarkable focus and DOF.  Since it is so wide you can almost have a DOF from right in front of the lens out to infinity!  Plus 12mm is really 12mm on the camera!  Given that the camera is both full frame and has a live view you can see the power of using this lens and the ease of composition and focus!

In the example image below please notice the extreme range of the depth of field!

Stormy Seas, down low and dirty... Voigtlander 12mm

Stormy Seas, down low and dirty… Voigtlander 12mm

 

As you can see, all of the system components are extremely high quality and easy to use giving stunning results.  I like to create Long Exposure and Infrared images as well so I thought that I would share some of them with you below.  

M240-BW 59s16ND PI Pier-0148-2014

Pier, Leica M240 60 second exposure

M240 w/ R72 IR Filter

M240 w/ R72 IR Filter

Leica M240 w/ 28mm Elmarit,

Leica M240 w/ 28mm Elmarit

6 Shot HDR, Leica M240

6 Shot HDR, Leica M240

Blue Hour in B&W, Leica M240, 60 second exposure

Blue Hour in B&W, Leica M240, 60 second exposure

M240-1109-60 s PI LE-2014

Low Tide, Leica M240, 45 second exposure

 

I hope that you enjoyed this post.  I will have several more shortly in the future highlighting more of this system as well as some new FILM work!! 

Stay Tuned!

 

Fuji X-E2 Long Exposures and Wild Sunsets!


Every Time I take the X-E2 out I am amazed…

Fire In The Sky, X-E2 w/ 18-55 and 3 stop soft grad ND on the sky.

Fire In The Sky, X-E2 w/ 18-55 and 3 stop soft grad ND on the sky.

We have been having amazingly turbulent weather here in Pawleys Island for the last week or so.  The sky has been moody and dark.  Mornings filled with dense fog and the ocean surf rough…   Perfect for long exposures and wild sunsets

What better excuse then to take the Fuji X-E2 out and capture these wild and moody scenes?  With my full kit of the Lee Seven 5 filters and B+W ND filters in hand I grabbed the X-E2 and the XF 55-200mm F3.5-4.8 Zoom Lens (which has kind of turned into my main carry around lens) and headed out to the beach.  

The X-E2 (in fact, the entire line of Fuji X cameras) is exceptionally adept at long exposure photography.  It generates low noise exposures and has NEVER let me down.  I usually shoot in the 2 to 4 minute range but once in a while will go up to 10 to 15 minutes depending upon the subject.  

In todays post I am shooting between 30 seconds and 4 minutes and one of the sunset images was just a short exposure (1/13).  

The setup for all of the long exposure water images was either a 6 or 10 stop B+W ND filter and the sunset had an added 3 stop soft graduated Lee filter (Seven 5 system).  The sky was just too bright with the wild colors to give anything but a black foreground otherwise! I also used the Fuji RR-90 remote shutter release (but you can also use a mechanical release or a Canon RS60 E3 release).

One of the big benefits of the Fuji X system is the fact that when in the  BULB mode Fuji gives you a count up timer on the LCD screen so that you can easily time your exposure.  This doesn’t sound like much but when you are out in the cold and dark shooting it is a BIG DEAL!  Try doing this with a Nikon 300 and you will understand!

Now, lets talk a little about your exposure metering.  

  • You can (and I sometimes do) use the cameras metering system, but I do find that when metering through the 10 stop ND that it will sometimes confuse the meter.  
  • You can also meter without the ND attached then attach it and adjust the exposure for whatever value the ND is but there is NO guarantee that the filter is actually what it is advertised to be!  
  • What I like to do is to use the Seikonic  758DR spot meter which can factor in the ND filter automatically for you and give you an accurate exposure.  You can also meter through the filter with the 758 to see what the real value of the filter is!.
  • You can also just get close with your first exposure then evaluate your histogram and adjust the exposure as desired.

Which ever way you choose you will be surprised how quickly you can get “on target” by taking just 1 exposure then adjusting! But remember. when we are spot metering either in camera or in an external meter whatever spot you  are metering on will give an exposure for Zone 5 or 18% grey. It is up to you to adjust the exposure up or down to place it into the proper Zone!  What I like to meter on is the sky just above the horizon then adjust it up about 1 stop (move from Zone 5 to Zone 6).  

I ALWAYS have the Long Exposure Noise Reduction turned on in my cameras.  This means that you will double your exposure time.  After you take your image, the camera will close the shutter and take a 2nd one with the same shutter speed.  This is called Dark Frame Noise Reduction and the camera will look for bright pixels in the 2nd shot and subtract them from the first.  This is very worthwhile and will allow you to create much better output images but cut down the amount of time you have to stand there and shoot!

As I said earlier, the mornings have been very foggy so lets start off with several examples of this type of photography.  Of course, you must remember to increase the exposure so that the fog is not a DARK GREY, these have been adjusted from Zone 5 to Zone 6.5 or 1 1/2 stops!

Salt Marsh in the morning fog...

Salt Marsh in the morning fog…

Pawleys Island Pier, Foggy Morning.  X-E2 with 10 stops of ND, 30 seconds.

Pawleys Island Pier, Foggy Morning. X-E2 with 10 stops of ND, 30 seconds.

Foggy Feast, X-E2. Sometimes simple is best!

Foggy Feast, X-E2. Sometimes simple is best!

Ok, lets move on to the evening.  The intent here was simple long exposures to smooth out the surf and remove the surfers (yes I hate surfers as they are always in your shot and don’t care!).  For these type of images you really need to start at 30 seconds and move up.  If the sky is within 3 stops of the foreground then you do not need to add a graduated ND on the sky.

Fire In The Sky,  90 second exposure with 3 stops of grad ND on the sky and 6 stops of ND overall.  X-E2

Fire In The Sky, 90 second exposure with 3 stops of grad ND on the sky and 6 stops of ND overall. X-E2. Notice the cloud movement in the sky and the smooth surf!

X-E2-240s BW LE Pawleys Pier-0255-2013

B&W Pier & Groin, Pawleys Island, SC 240 second exposure, 10 stop ND X-E2

X-E2-240s LE Pawleys Pier-0255-2013

Color version of above image. Notice how the sky and water are close to the same density? 240 seconds.

X-E2-BW LE Pawleys Pier-0246-2013

B&W version of “Fire in the sky”. Yes you should evaluate ALL of your images for B&W.

There is something very soothing about well done long exposures of the ocean.  They really are not difficult to do and the results are worth the investment in time and discomfort (did I mention that it is winter here and I was standing on the beach in the wind?).

As you can see, the Fuji X-E2 excels in all areas of photography.  It has proven itself to be a serious tool to photographers who understand its capabilities and master it functionality!

I hope that you enjoyed this post. Please let me know what you think!

Fuji X100s: Oh Yea…


You know the feeling, and usually need tissues to clean up afterwords!

A little background is in order…

Fuji X100s

Fuji X100s

Fuji X, what can you say except “Yes Please!”.  I am a LONG time X shooter.  I started out several years ago with the Fuji X100 and loved every moment of it.  I likened shooting with it to going home to Mama…  If you know what I mean then you understand.   I did decide that I really desired to have a camera with interchangeable lenses and when the Fuji X Pro 1 came out I jumped on it and all of the FX lenses that have since arrived plus several CV lenses as well.   The X Pro 1 has become may main goto camera system.  I Then purchased the X-E1 due to its electronic shutter release, thus its ability to connect to my lightning trigger and water drop computer system!  The X-E1 only lives for such things…  When I get it out to play with lightning it is like coming home to a doggy after a long day! I then decided to get another X Pro 1 and have it converted to 720nm Infrared.  This system (my 16th IR conversion) is the BEST IR camera that I have ever used and that is a big statement!

Passion Flower Macro, Fuji X100s hand held in bright sunlight.

Passion Flower Macro, Fuji X100s hand held in bright sunlight.

So, along comes the X100s, and I look it over and think on it for months.  I though that gee, what a neat system to add to my bag.   Finally I decided to get one but let me tell you that they are HARD TO FIND!  I found on at a little online camera store in Oregon and had them ship it to me last month.  I am very glad I made  this decision!  To say that the X100S is a world class camera is really short selling its capability!   I find that I carry it EVERYWHERE I go now.  I still use the X Pro 1 for most of my work but the X100s really gives stunning results and the new XTran 2 sensor is amazing.  I love the split image manual focus system and wish the other Fuji cameras offered it as well.

Adams Mill Wheel, Lafayette, IN, Fuji X100s

Adams Mill Wheel, Lafayette, IN, Fuji X100s

The X100s works very well in macro mode and the sharpness, colors and texture are simply breathtaking!  You could not ask more of a walk around camera than the Fuji delivers.  Even without image stabilization the camera is flawless due to its ability to shoot cleanly at high ISOs!

Abstract, Glass Block Floral, Fuji X100s

Abstract, Glass Block Floral, Fuji X100s

I am going to share a few of the images generated so far with this incredible camera and you be the judge!

The Dingy, Fuji X100s

The Dingy, Fuji X100s

Adams Mill, Lafayette IN, Fuji X100s

Adams Mill, Lafayette IN, Fuji X100s

McHargue Mill, Fuji X100s

McHargue Mill, Fuji X100s

Old Truck, Fuji X100s

Old Truck, Fuji X100s

A Face in the trees, Fuji X100s, you have to figure this one out!

A Face in the trees, Fuji X100s, you have to figure this one out!

Ok thats it for today!  What do you think?

Moody Images in Infrared & Color! Fuji X Pro 1 and X-E1


Grabbing your viewers by the throat and not letting go…

A dark and stormy night

A dark and stormy night, Fuji X Pro 1 w/ 14mm fuji lens at 720nm Infrared.

Images that are dark and moody tend to grab our attention.  It is as though there is something hidden and dark that demands our attention.  We stare at them and analyze the image for a deeper hidden meaning.  This creates emotional impact that allows our viewers to share what we felt as we created the images!

Look for dark, stormy skies, moody clouds, dark trees or water.  Work in Infrared and you will find that you have a much better chance to capture these kinds of images more often than when working in color.  It is still possible to do so in color but you have to work harder at it!

Paradise Island Light, Nassau

Paradise Island Light, Nassau

 

As you can see in the image above, it is moody and draws the viewer into the scene, but it does not have that “dark and stormy” look and feel!  As I stated before, it is much easier to capture these types of image when working in Infrared!

A dark and stormy night

A dark and stormy night

Work in both Faux Color and B&W.  You never really know what you are going to get unless you take the time to post process both ways.  You should even look seriously at the properly white balanced raw image right out of the camera!  Sometime you can get a really stunning image there.

Lady Katheran

Lady Katheran, 720nm Infrared, Fuji X Pro 1 with Fuji 14mm lens.

Here is the same image processed in B&W.

Lady Katheran

Lady Katheran

 

The workflow to getting great images in post processing is to ALWAYS process in the 3 main ways:

  • RAW:  Check how the images looks right out of the camera.  In 720nm and 590nm you can get some stunning images with beautiful bronze skies!
  • Faux Color:  If your camera captures any color data at all (720nm and lower) then you should ALWAYS take the time to process in this mode.
  • B&W: You just done know what you are going to get unless you try!

 

Try adding a lens vignette to your images to darken the corners.  This will give more mood!

Here are some examples of RAW and B&W post processing!

McClellanville Shrimper

McClellanville Shrimper, RAW right out of the camera!

 

McClellanville Shrimper

McClellanville Shrimper, B&W

 

As you can see both versions give stunning results.  The most important thing for you to remember is that to get the best results from all of your images it is necessary to take the time to post process in all three modes.  Do not short change yourself by cutting corners.  Take the time to give each image your best try!  

 

You will be rewarded for you work!

 

Wabi/Sabi: Exploring decay in man made objects


All things Old are Beautiful again..

This morning at 9:30 at Georgetown, SC. I decided to get out my cameras and shoot some Shrimp Boat images before I had to open a Co-Op gallery that I am a partial owner of.  The Shrimp  Boats are a subject that are very dear to me and I visit them every chance that I have.

They are for the most part all falling into decay.  The market for local salt water shrimp is almost not enough to support the boats.  With the import of fresh water farm shrimp the local fisherman are being forced out of business and the result is the condition of the boat and companies… A very sad state of affairs.

The Boat Graveyard and the 3 Wheel Houses...

The Boat Graveyard and the 3 Wheel Houses…

The image above illustrates the wabi-sabi concept:  There is beauty in decay  It sounds very counter to the way we think as artists, but with a little thought I think that you will be able to agree with the concept.

Wabi-Sabi

The Japanese concept of Wabi-Sabi, as described in Brainpickings, “connotes a way of living that finds beauty in imperfection and accepts the natural cycle of growth and decay.”

Characteristics of the wabi-sabi aesthetic include asymmetry, asperity (roughness or irregularity), simplicity, economy, austerity, modesty, intimacy and appreciation of the ingenuous integrity of natural objects and processes.
From an engineering or design point of view, “wabi” may be interpreted as the imperfect quality of any object, due to inevitable limitations in design and construction/manufacture especially with respect to unpredictable or changing usage conditions; then “sabi” could be interpreted as the aspect of imperfect reliability, or limited mortality of any object, hence the etymological connection with the Japanese word sabi, to rust.[citation needed]The Japanese kanji characters:

 


(sabi, meaning rust)

and


(sabi, as above)

are different, as are their applied meanings, yet the original word (pre-kanji, yamato-kotoba) is believed to be one and the same.
“Wabi-sabi is the most conspicuous and characteristic feature of traditional Japanese beauty and it occupies roughly the same position in the Japanese pantheon of aesthetic values as do the Greek ideals of beauty and perfection in the West.”  “if an object or expression can bring about, within us, a sense of serene melancholy and a spiritual longing, then that object could be said to be wabi-sabi.” “[Wabi-sabi] nurtures all that is authentic by acknowledging three simple realities: nothing lasts, nothing is finished, and nothing is perfect.”
The words wabi and sabi do not translate easily. Wabi originally referred to the loneliness of living in nature, remote from society; sabi meant “chill”, “lean” or “withered”. Around the 14th century these meanings began to change, taking on more positive connotations.[1] Wabi now connotes rustic simplicity, freshness or quietness, and can be applied to both natural and human-made objects, or understated elegance. It can also refer to quirks and anomalies arising from the process of construction, which add uniqueness and elegance to the object. Sabi is beauty or serenity that comes with age, when the life of the object and its impermanence are evidenced in its patina and wear, or in any visible repairs.

For me and what I consider to be “Fine Art Photography”, the concept of Wabi-Sabi fits like a glove in regards to the shrimp fleets.  I watch them over the span of time, capturing them again and again.  The one thing that stands out above all is the fact that they like everything else will fall into decay… both physically and financially, but faster.

The 3 Wheel Houses in B&W. Stepping back into an older time of photography, fitting don't you think?

The 3 Wheel Houses in B&W. Stepping back into an older time of photography, fitting don’t you think?

I am going to dedicate a photography project to this concept.  I would think that it will take me several years to finish or perhaps unto my death which in a strange twist of logic fits into the project/concept quite well.

So I hope that you enjoy these images and that you intellectually chew on the concept of Wabi-Sabi and to how it will fit into your own artistic visions….

Normally, detailed closeups would be better suited for wabi/sabi studies, but look at these following 2 images and notice how the rust and corrosion feed into the concept.  Do you see the detail in the flat areas of the boat and how it is rolling and pitted?  These imperfections take on an artistic perfection on their own!

Stormy Seas, Georgetown, SC.

Stormy Seas, Georgetown, SC.

B&W, stepping back into an "older" time and place.

B&W, stepping back into an “older” time and place.

The Wheel House Door

The Wheel House Door

The Working Boat, 630nm Infrared

The Working Boat, 630nm Infrared

The Battered Bow...

The Battered Bow…

I hope that you enjoyed the image and the concept…

This just is wrong! (or famous quotes!)


Things that tweak our sense of right and wrong!

This past weekend was my grandson’s 4th birthday party.  His mother and grandmother decided to do it up big time and invited a ton of people and had one of those big jumpy things in the back yard as well as a clown come by to entertain the kids.

DMC-GH2-50558-Jordan Beach-11

Jordan, my 4 year old grandson!

So with all of these folks in attendance you can imagine the pile of presants right? He had a ball opening them until he got to a set of boxes from a relative that had a pack of socks then a nice sweater.  As he tore open the socks and realized what they were he exclaimed in a loud and clear voice for all to hear:  “This is just wrong!”  Silence swept across the room  then the entire assembly burst out laughing!  Now from a newly minted 4 year olds point of view it was just wasn’t right!    But it didn’t matter a bit that the same person had also given him a GIANT BALL that he could get inside of and roll around.  We all had to agree and laugh along!

I too feel this way from time to time so I have decided to share these experiences (as they pertain to photography) as they happen with you. I am also going to add this to my growing list of quotes for photography!

I think next year at his 5th I will give him a digital camera and see it it is wrong!

So stand by….

Getting Better Long Exposures: Fuji X-E1 & Sekonic L758DR, A Detailed Tutorial


All things are fair in Love and War…

and we need every advantage we can get as photographers in long exposure!

Long Exposure Sunrise Abstract

Long Exposure Twilight Abstract with a 3 stop graduated soft ND filter to darken the sky.

The long exposure game, is one of compromises: fighting too little light, balancing the moon and its reflections, cameras and lenses, camera meter or external meter! Long exposures are one of the more difficult photographic styles and one that takes experience and patience to master.  As such, the photographer needs every helpful trick that they can gather into their bag of tricks in order to generate, stunning etherial images!

Equipment tailored to Long Exposures that I like and use:

  • Fuji X-E1 Camera.  Provides both electronic and mechanical remote shutter releasees, Bulb mode with back panel displayed timer, ultra clean low noise long exposure images!
  • Olympus OMD with the Panasonic 14-140mm lens.  Great built in long exposure modes like the Live View Bulb mode where the camera will display an updating image on the LCD panel as the exposure continues to be made.  This gives you a very clear indication of the exposure as it is happening and is like watching a Polaroid develop!  The ISO noise performance is not as good as the Fuji but is indeed acceptable.  I use both camera systems but like the Fuji better!
  • Fuji XF 18-55mm zoom lens.  Sharp images with good range of wide angle to standard lengths!  58mm filter size. ZERO lens flair.
  • Voigtlander Heliar 75mm f/1.8 Lens. Coupled with the Fuji M to X adapter provides an easy to focus sharp image with a 52mm  filter with a f/1.8 to f/16 aperture.
  • Voigtlander Ultra Wide-Heliar 12mm f/5.6 Aspherical M Mount Lens. Ultra wide super sharp and a depth of field that just goes on forever!  This lens takes a 67mm filter and can only take advantage of screw on filters due to its built lens hood.
  • Gitzo & Feisol Carbon Fibre Tripods with Really Right Stuff BH55 Ball head. This is a light weight combination gives solid steady support with ZERO camera creep from the ball head!
  • B+W ND filters, 3, 6 & 10 Stop.  These filters use Schott glass and are the best ND filters out there.  I much prefer fixed ND filters to variable because I KNOW what the filter factor always is for exposure settings and lack of guess work.
  • Lee Seven 5 Micro Filter System.  Simply stated, the Lee series of rectangular ND filters is the best in the world.  The Seven 5 system was designed for small camera systems like the range finder styled Fuji X-E1 camera system.  This provides the ability to use a set ND in the 2, 3 and 10 stop range in conjunction with a graduated ND filter in Hard or Soft edges from 1, 2 & 3 stop ranges to darken the sky for further control!  While expensive (what isn’t?) this system gives the photographer the best opportunity to capture PERFECT long exposures in any situation!
  • Sekonic L758DR Light Meter.  This is my main tool aside from the camera, for long exposures!  It is a 1 degree spot meter that can be calibrated to your camera and gives PERFECT exposures while accounting for what ever ND filter you have installed.  It gives you a choice of where you meter in the scene and then using the ZONE SYSTEM allows you to shift your exposure up or down in order to give you the image you envision!  For me, this is my MUST HAVE MAIN TOOL for exposure control.  It goes way beyond the capability of your in camera metering system.

Must Have Thought Processes to Master Long Exposure Photography

  • You must MASTER the physics of exposure!  But relax, this can be accomplished in about 1/2 hour then a few outing to experiment with your new knowledge set!
  • You must MASTER the ZONE SYSTEM of exposure control. This is simply a different way at looking at exposure where you divide what the camera can see and record into 10 distinct zones from black to white with each zone assigned to a specific stop that can be adjusted with either shutter speed or aperture.  This will make your in head exposure calculations easy and automatic.  When you couple this with the fact that ALL metering systems force the measurement area into the 18% gray area (ZONE 5) then you can see how easy it is to force the camera exposure to give you the envisioned image the first time!  There are several books and videos on Amazon that will be good to read. Here is a nice book on the overall zone system, and here is one dealing with it for digital systems.
  • The ability do look at a scene before you ever pick up a camera and envision what you want to capture and how you want it to look!  Remember, the camera is a tool, you master your tool and make it create your envisioned image!
  • The drive to suffer through long hours in the dark and cold just to capture 3 or 4 images!  Know this, the exposure, say 15 minutes is only 1/2 the time needed by the camera to save the image onto your memory card.  The camera will run a noise reduction cycle the same length as the exposure before you can move onto the next exposure.  So if you take a 15 minute shot your camera will be tied up for 30 minutes!  This then, is why you need to get the exposure dead on each and every time!  You only can get so many shots when it takes 1/2 hour for each 15 minute shot.
  • The ability to post process (I use Photoshop CS6 and the Nik Software filter set) in both Color and B&W.
The Pawleys Island Pier, Fuji X-E1 with the 18-55mm lens, 3 stop Lee Graduated ND for the sky and a 3 stop ND overall.

The Pawleys Island Pier, Fuji X-E1 with the 18-55mm lens, 3 stop Lee Graduated ND for the sky and a 3 stop ND overall.

So let’s put all of this together in a process or recipe (if you will) that will lead us to success in the Long Exposure game (NOT Star Trails which is a slightly different game!

My favorite time to setup and start taking my long exposures is from 1/2 hour before sunset to about 2 hours after (depending upon the moon).

I will usually go to the beach and look for something in the foreground like some rocks, groin, dead trees, pilings or a pier.

680 second exposure, Pawleys Island Pier and Groin.  Fuji X-E1, at the end of twilight going into full darkness

680 second exposure, Pawleys Island Pier and Groin. Fuji X-E1, at the end of twilight going into full darkness


The ocean state only make a difference in that if the waves are large then you will need a much longer exposure to flatten them out. So many of the long exposures you see with bands of dark and light in the ocean are caused by your exposure being too short to totally flatten the surface.  A single band of white in the foreground is caused by the surf crashing down onto the sand and that can also be overcome by extending your exposure past 10 minutes!

  • 1/2 hour prior to sunset: For this time period you will need a 6 to 10 stop ND filter (depending upon the light in the sky) to darken the scene enough to slow the water and clouds down.  By adding a graduated ND filter to cover the sky you can further even the scene and give a moody sky especially if there are colds!

    1/2 hour before Sunset, Fuji X-E1 250 seconds with 10 stop ND, extremely cloudy!

    1/2 hour before Sunset, Fuji X-E1 250 seconds with 10 stop ND, extremely cloudy!

  • Sunset/Sunrise:  keeping the same filters in place you are now getting exposures in the 6 minute range.  The water is very smooth and milky.  Start show up in the sky and leave curved trails. Sky colors explode and you will get your best color saturation.

    Sunrise, Outer Banks Fishing Pier, Fuji X-Pro 156 seconds, 3 stop ND.

    Sunrise, Outer Banks Fishing Pier, Fuji X-Pro 156 seconds, 3 stop ND.

  • Twilight:  The sun is down, and the sky is turning dark blue. The stars are bright.  It is time to remove the fixed ND filter but perhaps leave on the graduated ND for the sky.  Your exposure times should drop down into the 1 to 3 minute range providing the moon is not full.  At this point a full moon will provide way too much light and turn the sky white.  A 1/4 moon will give nice even lighting and a much better image.

    The 2-fer, The pier & groin, Pawleys Island Twilight

    The 2-fer, The pier & groin, Pawleys Island Twilight

  • The DARK:  Ok, there is no light in the sky other than the moon, stars and pollution. Sometimes though, the light pollution from buildings and towns can add a dramatic component to your images like the one shown below!  This is the time now when you are looking at exposure times from 4 to 20 minutes depending upon the light conditions.  I will now remove all filters unless there is a very bright moon.
Full Dark!  Fuji X-E1 with a 3 stop Lee graduated ND filter  covering the sky to the horizon. 125 seconds at f/11. Light pollution from the hotels and pier behind me.

Full Dark! Fuji X-E1 with a 3 stop Lee graduated ND filter covering the sky to the horizon. 125 seconds at f/11. Light pollution from the hotels and pier behind me.

Of all of the times in the list above I like the Sunset and Twilight times for my best images!

Metering:

Metering of all the aspects of long exposures is your most difficult hurdle.  The in camera meters when set to spot, are indeed capable, but they are not totally accurate and more importantly, they are large spots, in the 5 degree  range rather than the 1 degree of the hand held meters.  Yes you can use them but be prepared to have to adjust your exposure for a second shot… And this is WHILE the ambient light is rapidly changing as the sun continues to set!

Time for a talk on exposure..

We have the 3 basic exposure settings to work with, ISO (which should be set on your cameras lowest or native setting), APERTURE, which for a sharp image with proper DOF should be set for f/8 to f/16 and Shutter speed which should be set at least at 30 seconds and around 2 minutes for good smoothing of the ocean surface and clouds. You will lock the ISO and APERTURE while looking for a good shutter value to be generated by the metering system.  So as you can see, you can set the camera in Aperture Priority mode to shoot here.  I find though that I like full manual mode better.

Here is what you can expect for various shutter speeds:

  1. 30 seconds, start to have good smoothing of the waves with some of the bigger waves still showing above the water surface.  Alternating dark and light bands in the waters surface.
  2. 60 seconds, a more profound smoothing in the waters surface, more even lighting and coloring, still with some bands…
  3. 120 seconds, total smoothing of the water, no banding and great even coloring of the water.
  4. 480 seconds and up, totally smooth water, even color and shading, almost a glass like surface of with milk.  Very pleasing and soothing…

Keeping the Depth Of Field (DOF) in mind, you can see that the shutter speeds are the key to your images.

Now, how best to determine your exposure?

Time for the meat of this post, metering…

As discussed earlier, the internal meter of digital camera systems is not the best meter out there.  In the spot mode they provide a very large spot (5 degrees) when what we really need is a 1 degree spot.  The smaller spot gives us a more accurate and isolated reading which can be vital in determining the overall exposure.  If you use this in conjunction with the ZONE system developed by Ansel Adams then we have a really powerful system.  Lets take a look.

Zones

Zones

The ZONE system is very simple.  It divided your total exposure into 10 equal parts or zones.  Each zone is a specific “stop” and the center (zone 5) where where ALL METERS place the exposure of anything it sees!

As you can see from the chart on the left of the zones, they start at black for zone 0 and move to white at zone 10.  Zone 5 being the 18% gray is what the meter sees and will adjust the exposure of the spot metered to be there in the 18% gray!  This explains why so  many photographers snow images come out as gray!  Knowing that the meter will automatically place the measured spot into the gray area it is a simple matter for the photographer to mentally move the zone up or down in adjustment in order to place the metered spot into the desired zone!

It is easy to understand and implement!

Looking at Zones

Looking at Zones

  1. So, let’s take a look at a sample image, not as a photograph but what we would see with our eyes. If you were to look at the top meter spot in the sky you would see that it falls into zone 7!  But if we were to meter on this spot, the meter/camera would move it to zone 5 which would be just too dark for the overall picture.  The fix is to take the meter reading then mentally move it into zone 7 by adding 2 stops of exposure.  Here is what the meter system suggested for this measurement:  Spot reading on the overcast sky at f/8, ISO 200 gives a shutter speed of 15 seconds, but we KNOW that it is in zone 5.  We simply add 2 stops to place it into zone 7 by increasing exposure to 60 seconds, or 2 stops.  The sky now brightens into zone 7.
  2. Lets do another and meter on the horizon water.  The spot meter reads this as f/8, ISO 200 and the shutter speed of 60 seconds which it sees in zone 5 and since it is actually in zone 5 we can just go with the suggested exposure!

See?  Easy to do.

So, hopefully the camera meter has a small enough spot to read these small areas and give you an accurate exposure suggestion.  But, what happens when you add a 3, 6 or 10 stop ND filter into the mix?  Well 3 stops will not affect the meter, but 6 and 10 will destroy any accuracy and your exposures will be all over the place.  We just cannot have that happens so this is where a hand held spot meter comes into play!

There are 3 things that you must keep in mind when you are thinking about hand held meters.

  1. They are more accurate than camera meters
  2. They have a true 1 degree spot
  3. They allow you to tell them of any ND filters installed on the camera and automatically compensate for them!

I suggest 2 meters from Sekonic for you to consider, the L508 and L758DR.

  • The 508 has an adjustable spot from 1 to 5 degrees and allows you to account for an installed ND filter .  It is no longer produced but readily available for around $300.00.
  • The L758DR has a fixed 1 degree spot, allows for filter compensation up to 10 stops and can be calibrated to your camera.  It also has a viewfinder display and much greater functionality than the 508.  It can be found for about $650.oo.

Sekonic L758DR Spot Meter

Sekonic L758DR Spot Meter

Here is the L758DR which is what I am using and will show in the following examples. The meter has 2 modes of measuring light, the lumasphere and the spot which is simply an eye piece that you look thru and shows a target you place on the area of the scene you wish to measure!

How to use the Sekonic L758DR Spot Meter:

  1. You need to use the custom functions on the meter to set WHOLE stops for the shutter speed.  This will simplify you life in a major way!
  2. Set the meter MODE to SPOT with the APERTURE selected which enables you to lock in a specific Aperture.  This will have the F surrounded by a BOX. Then when you take a measurement, the Shutter Speed will be displayed for Zone 5.
  3. You need to set your natural ISO into the meter.  Press and hold the ISO 1 button and simply turn the round dial to select that ISO you desire to work in!
  4. Decide on which ND filter (if any) you are going to use for this shot!  Then hold down BOTH the ISO 1 and ISO 1 buttons while turning the round dial to select between +/- 0 to 9.9 stops.
  5. Then you just press the measure button under  the spot viewfinder  to measure your selected area of the scene and adjust the Zone up or down as in the zone examples above!  It is that simple!

Set Mode to SPOT

Set SPOT Mode

Set SPOT Mode

Setting the ISO

ISO Set

ISO Set

Setting the Filter compensation

Filter Compensation

Filter Compensation

Taking the Measurement

Meter Viewfinder showing the target and measured values. The meter button is just below this.

Meter Viewfinder showing the target and measured values. The meter button is just below this.

That is all of the necessary steps to use this meter. It really is very easy! There are several videos on the Sekonic web site as well as on Utube.  

Understanding ND Filters:

The B+W, well most others as well can be tough to understand!  Here is a break down of all of the filters and how to read the codes!

B+W ND INFO

B+W ND INFO

Knowing how to read the filters is important but understanding how to use them even more so.  Lucky for us in long exposures we are interested in the shutter speed.  If we get a shutter speed of 1/15 second with no ND installed we know that it is simply too fast to slow the water down!  So we realize that a ND filter is needed.

Standard ND Filters effect on a 1/15 second shutter speed with a fixed ISO and Aperture:

  • No filter            1/15 second
  • 1 Stop                1/8 second
  • 2 Stops             1/4 second
  • 3 Stops             1/2 second
  • 6 stops             4 seconds
  • 1o Stops           1 minute

These are the standard ND filters from B+W, other companies offer the same and other values.  Lee offers in the Seven 5 system, 1, 2, 3 and 10 stop values as well.

So now, you take your meter reading and look at the suggested shutter speed, install a ND filter and then tell the meter which one chosen and it will give you the corrected shutter speed. Remember, all camera meters will fail at 6 stops on!

Graduated ND Filters:

Lee Hard Graduated ND

Lee Hard Graduated ND

Lee Soft Graduated ND

Lee Soft Graduated ND

These are filters from Lee (some round ones from B+W but they divide directly in the center) that come in 1, 2 and 3 stops.  They are either a hard transition between dark and clear or a soft transition covering a larger area of the filter.  I use these filters to darken part of the image, usually the sky.  If you have a firmly visible seperation between the sky and water at the horizon, you can use a hard graduated filter.  Otherwise you will use the soft which is the normally used choice. Take a look at the images here of both and you can see their usefulness.

Deciding on which value to choose, 1, 2 or 3 stops is simple.  You simply use your meter to spot read the sky and then again the ocean.  Look at the difference between the shutter speeds given with a fixed Aperture and ISO.  The difference will tell you how much graduated ND you need to use.

These filters are also handy for other landscapes as well.  How often are we plagued with waterfalls or landscapes where the sky is just too bright?  Apply the same metering difference to those images as well for a vastly improved result.

Last minute considerations as you venture out to practice your Long Exposures!

  1. Keep your lens clean, salt spray can and will sneak up on you and spit all over your glass!
  2. Push your tripod legs slightly into the sand for increased stability.
  3. Keep aware of the surf!  Do not let it over take your tripod. it will cause your camera to drop a little lower and ruin a shot.
  4. Keep the Horizon STRAIGHT!!  If you have an in camera level use it!  If not, purchase and attach an external level onto your flash hot shoe and use it!
  5. Use your in camera long exposure noise reduction setting in the custom settings!  This will not only reduce noise in camera (yes photoshop can do this) but it will remove all sensor hot pixels and dark pixels which photoshop will NOT DO!  I understand that your exposure time will double due to this but isn’t the final image quality worth the extra wait?
  6. Take a light weight chair.
  7. Have a light to see the camera setups or a ultra bright light to lighten a subject for focus!  I like a lighted hat for this and a Sure Fire LED 500 Lumen light to reach out and light a subject for focus (not to mention light painting!)
  8. Gloves?
  9. Warm Coat?
480 second exposure, Fuji X-E1 Late Twilight! Metering of the cloud base just above the horizon then moved to Zone 7!

480 second exposure, Fuji X-E1 Late Twilight! Metering of the cloud base just above the horizon then moved to Zone 7!

OK all done, I hope that you both enjoyed and learned from this post!  Please let me know.

Twilights Bitter End…


No Words, just images…

 

The Bigger End, Olympus OMD.

The Bigger End, Olympus OMD.

 

The 2-fer, The pier & groin, Pawleys Island Twilight

The 2-fer, The pier & groin, Pawleys Island Twilight

The 2-fer, The pier & groin, Pawleys Island Twilight

The B&W 2-fer, The pier & groin, Pawleys Island Twilight

 

Olympus OMD EM5 and Ultra Long Exposures!


And now for something different!

Pawleys Pier, Twilight. 847 Second Exposure, Olympus OMD with the 12-60mm lens.  Iso 200, f/22

Pawleys Pier, Twilight. 847 Second Exposure, Olympus OMD with the 12-60mm lens. Iso 200, f/22

I know, most of my recent posts have been about the new Fuji X-E1, but tonight I decided to take out the OMD and test it out for ultra long exposures.  I have the OMD as a high speed replacement for my Canon DSLR (currently a 7D) in order to reduce weight and ease of use.  Overall the camera performs very well and generates impressive, sharp images up into very high ISO’s! But a friend recently purchased one to use and wanted to do some long exposures.  So I got mine out, looked over the in camera options and was VERY surprised to learn of several very nice long exposure benefits built into this camera!

  • Live View Bulb Mode: This is an amazing feature (are you listening Fuji?)!  With this mode, you must first set the max shutter speed length, then the update times.  What this means is that you can set an exact exposure or some ultra long one.  Then you can let the camera time the shutter or you can use a remote shutter release to start and stop the exposure as one would normally see in a BULB mode.  What the added value here is that the camera turns on the live view screen and updates the LCD panel with the  image displayed with the CURRENT exposure during the BULB exposure!  The timing of the update is the value you set when you set the update times!  You can have up to 24 updates.  In simple terms, this allows you to SEE the image developing on the LCD panel during the exposure!  Way cool and very valuable.  The only change I could wish for is for the histogram to also be displayed for each updated image.  A remote shutter release with a lock is required for this mode.
  • Live View Timer Mode:  This works just the same as the BULB mode except that you press the shutter release once to start and once to end!  If you forget your remote shutter release you can still get the picture!
  • Onscreen Level:  This allows you to get the horizon straight!  Simple thing but important for any image and critical for long exposures.
  • Programmable Function Keys:  Makes long exposures in the dark easier but setting Function Button 1 to Manual Focus.  This means that you can switch back and forth from manual to auto focus modes without having to go through the menu system.
  • On Screen Focus Point Touch Select: With the camera in auto focus mode you can touch the area of the image that you wish to focus on and then do a focus.  By using this in conjunction with the function key as described above you can easily change your focus. In the dark, this makes it very easy to select a point of light on a long pier and have the camera focus, then hit the function key to select the manual focus mode to lock it in! If there is not a point of light, having an ULTRA BRIGHT flashlight and lighting something in the scene to focus on works well also!

The OMD worked tonight flawlessly for these long exposures!  The longest was over 14 minutes and generated a clean low noise image!  But most importantly, I was able to take this image with NO metering at all. I simply chose the Live View Bulb mode and watched the image develop on the LCD screen during the exposure and when it was where I liked it I simply stopped the exposure!  Understand, this is not exact as the LCD does not give an exact true image display, but it was always within 1 stop!

Here is a B&W version as well but I think you will agree that this entire outing was easy and fun and gave superb results!

The B&W version processed in Nik's Silver EFX.

The B&W version processed in Nik’s Silver EFX.

Death by neglect….


Lila Lee, in the boat grave yard…

There is something about Shrimpers… I cannot get enough of them and find myself visiting them again and again.  I love the dilapidated nature of them and even though they are in such rough condition they seem to venture out into the deep time after time.  Perhaps they are a reflection of the men who sail them, rough hewn, salty men, eking out a living from the sea.  Regardless, they are things of photographic beauty and deserve to be documented for history. You see, they are vanishing from sight.  Shrimp seems to mainly come for fresh water farm ponds in the lower americas and soon these beautiful boats will be a thing of the past.

The Japanese concept of Wabi-Sabi:  “connotes a way of living that finds beauty in imperfection and accepts the natural cycle of growth and decay. Characteristics of the wabi-sabi aesthetic include asymmetry, asperity (roughness or irregularity), simplicity, economy, austerity, modesty, intimacy and appreciation of the ingenuous integrity of natural objects and processes.

Thus begins my exploration of Sabi

You had better get out and enjoy them while you are able too..

Here captured in Black and White, is a detail shot of the shrimper Lila Lee.  She is resting in the boat grave yard in Georgetown, SC. The older shrimpers seem to be abandoned along the shore here in Georteown till they sink.  We have some sitting on the bottom growing trees and weeds from their decks.

This image was captured on the Fuji X-E1  with a MC Soligor 70-300mm C/D manual focus macro lens, another relic of the past…

Lila Lee

Lila Lee

Further X-E1 Long Exposure Work


Fuji X-E1 280 second exposure at f/8

Fuji X-E1 280 second exposure at f/8

 

Or, if your are thrown off the horse, climb back on!

 

I went out tonight at sunset to the Pawleys Island Pier to try some more very long exposures with the Fuji X-E1.  I used the new 18-55mm lens with a B+W 6 stop ND filter until it got really dark then I shifted to just the lens.

It was just perfect out tonight.  A few clouds in the sky, medium wind and very little blowing sand in the air.  I setup with an angle on the pier with the moon behind my back.  I got there early enough to setup and pre-focus.

I used my Sekonic L758DR light meter with 6 stops of exposure compensation dialed in for the ND filter and started shooting.  In failing light, the hand held spot meter makes exposures easy, fast and perfect!  I simply aimed the 1 degree spot at the gray/purple band of clouds right next to the horizon and took my meter reading from that. Then I moved it from Zone 5 to Zone 6 or 1 stop brighter.  The meter gave me 15 seconds of shutter speed and f/22 so I simply added 1 more stop by changing the shutter speed to 30 seconds!  Very easy and by using the Zone system when thinking about exposure it can fast become second nature.

Fuji X-E1 30 second exposure at f/22

Fuji X-E1 30 second exposure at f/22

The first 10 min or so I was only able to get 30 second exposures but only at f/22.  I did have a 10 stop ND filter in the bag but I decided to just stay with the 6 stop. Even at 30 seconds, they were still quite pleasing!  I really like the Time mode on the X-E1 as it makes setup easy, but the Bulb mode is very well thought out. It gives a nice count up timer on the LCD screen and makes for perfect exposure!

Even checking the focus after it gets too dark to see is easy with the X-E1. Place the camera into manual focus mode place one of the pier lights into the middle of the focus square and push the jog dial straight in. This will cause the camera to magnify what is inside of the cameras focus box. You then go back and forth with the lens focus ring till you get the smallest sharpest light!  All done.

As it got darker I was forced to re meter the scene again and again. For this next shot the light had faded another entire stop and forced me to again double the shutter speed to compensate for the changing conditions and still allow me to capture the clouds on the horizon at Zone 6!

60 second shutter speed at f/8

60 second shutter speed at f/8

 

Things start to get very complicated and fast as the sun falls below the horizon.  The next image was metered at 140 seconds but during that exposure, the light dropped another 2 stops!  so I split the difference and increased the exposure by keeping the shutter open another stop or 280 seconds.  this worked quite well and gave a very pleasing exposure!  Please keep in mind that this image was taken after the sun was totally gone and it was quite dark out but with enough light left to give a good exposure of the clouds and pier. You can tell that this image was taken in very low light because the pier lamp reflections are prominent in the picture.  Here is that image:

280 second exposure, f/8

280 second exposure, f/8

Remember, for every minute of exposure the camera requires a minute of noise reduction. So for the above exposure the total time of forced waiting was 560 seconds!  So for this last image a lot of time passed while I waited and it was TOTALLY dark out now.  The moon gave very little light but the lights on the pier worked very well and put some interesting colors on the waters surface!

Ok for this last image there is ZERO light left in the sky.  The stars are very bright and fill the sky with a wonderful pattern.  But, the pier lights are so bright that they pollute the image and wash out the sky blocking the stars in the image.  Another complication is that it is just too dark out now to need the ND filter.  So I removed it and adjusted the meter so that the compensation is now set to zero.  The reading suggested was 425 seconds at f/8.  Why f/8?  Well I desired the sharpest image possible so I locked the meter to that.  I still needed to move the lower sky 1 stop brighter, you know from Zone 5 to Zone 6.  This made it necessary to move the shutter speed from 425 seconds to 850 seconds (14 minutes) and now I am ready to shoot.  So lets look at this last shot, 850 seconds of exposure then 850 seconds of in camera noise reduction.  So I have to wait for 28 minutes from the start of the exposure until the image popped up on the LCD panel!

Here is the final image of the evening, a 14 minute exposure at f/8.  Yes the pier light reflections close to the pier/water intersection is a little harsh but still, this demonstrates exactly what you can achieve by thing long exposure, but more importantly, it shows what the Fuji X-E1 is capable of capturing with a little bit of creative thinking!

850 second (14 min) exposure at f/8

850 second (14 min) exposure at f/8

Did you find any of this post helpful?  Please let me know!

Dang, “DID I REALLY DO THAT? REALLY!!!”


Sometimes you get the bear, sometimes the bear gets you…

Long day today at the gallery.  The electrician was in all day installing 22 new high intensity lights with floods to better light the co-op walls.  But the place has a lot of dry wall dust around and a simple sweeping will not be enough.

I needed to get away…

Skittles & me.

Skittles & me.

So at 5 I went home and took the doggy out.  She was happy to see me to say the least.  I really do not pay enough attention to her.   But after a half hour there with her I grabbed:

  • Fuji X-Pro 1 camera
  • Fuji 18-55mm lens
  • 3 stop ND
  • 6 stop ND
  • 10 stop ND
  • Sekonic L758DR spot meter
  • Remote shutter release

Please notice that I did not grab my camera bag…

So off we go to the island.  I did the Pawleys Island Pier the other night so I headed to the south end and the groin there to shoot some long exposures.

It was nice out, warm and empty of people.  Perfect.  Got out the Sekonic, dialed in 6 stops of EV to correct for the B+W 6 stop ND, set the meter to ISO 200 and started taking reading off the sky just above the watery horizon.  Got several changing values but it was fast getting dark.  The first few image captures went very well and I was starting to warm up to the evening on the beach.

Feel guilty being out here tonight, Ellen (my wonderful wife) loves the beach and has been deprived of this for the entire year and to add insult to injury she is working all night at the local hospital.  I suppose that i will just have to enjoy this for her.

Pawleys Island south groin.  30 seconds @ 30 seconds.  Fuji X-Pro 1 with the 15-55mm lens.

Pawleys Island south groin. 30 seconds @ 30 seconds. Fuji X-Pro 1 with the 15-55mm lens.

I got some very nice 30 second shots at f/11 but I was aching for something more meaningful, you know around 20 minutes!  So it is time to change things around and go after the really long exposure.  I get out the meter again, set it and the camera to f/8 for the best sharpness, check the shutter speed… hmm f/8 @ 8 minutes but this is a metered spot on the horizon and I simply do not want it in Zone 5, so I add in 2 more stops to move it into Zone 7, set the camera and shoot!

Time goes by…

Still going by…

Slowly…

10 minutes have gone by… Why didn’t I bring a flash light?  It is so dark that I can hardly see!  Gee Mark YOU KNOW BETTER THAT THAT!  So I give myself a smack on the head, then shake it in minor annoyance of myself and … HEY WHAT THE HECK!! MY FEET ARE WET!!  THE TRIPOD IS SINKING INTO THE SAND!  DANG!  DARN CRAP!!

Stop the exposure at 11 minutes and move the tripod up the beach to dry sand  and wait….

Still waiting…

Dang, the in camera long exposure noise reduction takes sooooo looooonnnnggg… Didn’t I tell you that what ever you long exposure is the camera takes the same time after it to do a noise reduction???

I QUIT!  I carry the tripod/camera to the truck  with it still doing the noise reduction when it happens… you know, the REALLY BAD THING!

The camera quit the noise processing and the image pops up into the LCD panel  and it is….

WHITE!   WHAT HAPPENED?  

I got wet for white? I stood here for 22 minutes for white?

THE EXPOSURE WAS PERFECTLY METERED AND ENTERED INTO THE CAMERA! THIS CANNOT BE MY FAULT…

Ohhh…

I am SO STUPID!  Look at that, the ISO has been set to 1600 instead of 200.  How did that happen?  I only shoot at high ISO’s when I am with the grandkids at Disney World! Now I recently got back from Disney and I took this camera and haven’t  used it since then…. No, that can not be it, the first 30 second images came out properly as metered…

Hmm, lets see, ISO 200 to 1600, and the image had already been shifted from Zone 5 to Zone 7!

DANG AGAIN!  That is an additional 3 stops of brightness..  ZONE 10!

!*:$@!)&$ DANG, (*!#&(^!(@&) DARN )(*&$&#@)$&

Ok, I am calm now, it didn’t cost any film, wet feet can dry and I can go out and shoot it again on another night.  ZONE 10!!!  No wonder the image was white! !#)*(#*@&(E*Q&R

22 minutes W A S T E D and no ultra long exposure.

_____________________________________________

OK, what did I/WE learn here?

  1. BRING A FLASHLIGHT!
  2. Be aware of the changing tide!
  3. If you are going to take super long exposures DOUBLE CHECK YOUR EXPOSURE VALUES and do NOT forget to check the ISO!  I think someone walked up to the camera in the dark and changed it on me while my back was turned!
  4. Bring a change in socks!

See, we all make mistakes, even photographers with 48 years of experience!

Got it?  I hope so, because I would be so embarrassed to hear that you made so many beginner  mistakes,  After all we do have appearances to keep up!

Smile, life goes on… and we occasionally get lucky.  In the parking lot packing up to leave I see this across the tidal creek…

Moon over the Marsh.. 4 second exposure

Moon over the Marsh.. 4 second exposure

So the bear won this time but there is always tomorrow night…

Update:

I have had a lot of questions about this creek image.  Mostly folks want to know how I got a dark blue sky in the deep night!  And it was totally black out when I took this image.  There was supposed to be NO moon this night.  But for some strange reason there was the smallest sliver of it showing under its bottom.  I mean so small that it was almost cut with a knife!  The clouds below the moon were barely there because for what ever the reason the moon was getting a little light it reflected down and highlighted the clouds.  Above the moon the sky took on the deep blue cast (again due the to the strange lighting on the moon).  This only lasted about 5 minutes then the moon disappeared totally, the sky turned black and the clouds lost their light and faded from view.

The exposure data:

  • ISO 200 (yes I double checked this time)
  • 4 second shutter
  • f/4

Ultra Long Fuji X-E1 Exposure Tutorial


Slower can be better…

Pawleys Per, Fuji X-E1, 480 seconds, f/22, 6 stop ND

Pawleys Pier at night, Fuji X-E1, 480 seconds, f/22, 6 stop ND

Ultra long exposure photography can be a very fulfilling pursuit and generate etherial images that draw your viewer into them leaving them week in the knees! As a photography master generalist I can tell you that there are a few speciality areas that can really excite me and force my juices to flow!  Specifically they are:

  • Ultra High Speed photography: Water Drop Collision Photography, Daytime Lightning Photography & Hummingbird Photography
  • Infrared Photography
  • Grist Mill Photography
  • Ultra Long Exposure Photography.

This post is a tutorial on Ultra Long Exposure photography using the Fuji X-E1 camera with its 18-55mm lens, a 6 stop B+W ND filter and a Sekonic L758DR spot meter.

Fuji X-E1 with its 18-55mm lens

Fuji X-E1 with its 18-55mm lens

The Fuji X-E1 is my 3rd in the Fuji line. I started with the X100 and moved to the X Pro 1 in order to have interchangeable lenses, then to the X-E1 to take advantage of its Electronic Shutter Release. I have always been a Canon shooter with closets full of L lenses.  But due to a spinal operation that went dreadfully wrong I lost 80% use of both hands and arms.  No longer able to hold heavy camera equipment I started on a long journey searching for high quality camera system that was small and light weight and produce world class images.  A long story shortened, I settled on the Fuji X lineup and their fine quality lenses along with a few CV and Leica M mount lenses.

Now, the Fuji X-E1 with its electronic shutter allows me to hook it up to my water drop machine, Lightning Trigger and Hummingbird control system!  The only lacking item is its short lens lineup.  With the introduction of the new 55-210mm lens this spring even that will no longer be a problem for me!

Long exposure has several issues that you must overcome to successfully create the etherial, emotionally charged image.

  • Long Shutter Speed: Even in low light you will find it difficult to get a shutter speed at f/8 (sharpest).
  • Difficulty Focusing:  Darkness you know…
  • Unreliable Metering: Especially with an installed ND filter.
  • Camera Shake:  Requires a STURDY tripod and REMOTE SHUTTER RELEASE.

The Long shutter speeds generally can range from 15 seconds to 20 minutes. These are difficult to reach unless you shoot at night with light from the moon.  What I find that I do is shoot at dusk on or just before sunrise to overcome this issue.  Usually I will add a Neutral Density Filter (ND) to reduce the total amount of light reaching the image sensor. This will allow you to shoot with more ambient light and generally make this style of photography easier!

Heliopan Variable ND Filter

Heliopan Variable ND Filter

Shutter Speeds in Full Stops

Shutter Speeds in Full Stops

I like the B+W line of ND filters and keep 3 on hand for each of my lenses I use:  3 Stop, 6 Stop and 10 Stop.  There are also some really good variable ND filters as well.  But be warned: You get what you pay for with these!  If you get one of the Fader filters on Ebay for $30 then you are sure  to be disappointed.  But on the other hand if you get the Singh Ray Vari ND (~$450) or the Heliopan Digital Vari ND (~$350). The trouble with the variable ND filters is that they are generally limited to 6 stops before they start to generate artifacts into your images.

If you take a look at your standard 1 stop shutter speeds you can see what adding 6 stops of ND filter will do… If you have a metered exposure say, f/8 at 1 second, adding a 6 stop ND filter will give you a 1 minute exposure!

Aperture in Full Stops

Aperture in Full Stops

If you desire a longer shutter speed you can also increase your aperture value up to a higher number forcing the shutter speed down to allow more light to strike the sensor.

We started at f/8, but by moving it 3 full stops to f/22 (see chart on the right) we can then move our shutter speed 3 more stops slower to 8 minutes!

You can move the aperture and shutter speeds up and down to get the balance you need for your artistic interpretation you desire for your image.  Remember though, the sharpest that most lenses are capable of is at f/8!

Ok, lets talk about the issues in focusing!

It is dark out, you can see very little detail in your viewfinder!  How can we accurately focus?  Here are some ideas for you to consider!

Use a Light as a focus point

Use a Light as a focus point

  • If shooting a subject like a pier or a lighthouse, set your camera on manual focus and adjust the focus to create a sharp round ball of one of the pier lights. These lights are a great focus point. You can also look between pilings for areas of dark/light.

 

Surefire E2D

Surefire E2D

  • If there are no lights to focus on then you can use a high power flashlight to high light the part of the scene you wish to focus on. There are several high power LED tactical lights that you can get and are a good idea to have in your case.  Look at the Surefire E2D LED light.
  • Get someone to go stand at your selected focus point if possible with a light, then focus on the light!
  • You can manually set your focus distance to the hyper focal value if you have previously determined it for your camera/lens combination.
  • Remember, manual focus is the best and easiest way to get the focus that you desire.

Unreliable Metering…

Ok, this is a biggie.  You will find that when using a 10 stop ND and on some cameras, the 6 stop ND that the in camera metering system does not work reliably.  Plus to make this even more interesting consider a very long exposure, say 10 min where the light is changing and getting a stop or 2 darker during the exposure!  These are not small matters to overcome. There are several work arounds for this from a simple pain in the but to advanced hand held meters!

Here is a list of suggestions for you to consider..

  • Try shooting in Aperture mode:  Allow the camera to attempt to set the shutter speed.  If shooting at dusk or in the dark with a ND filter installed you have about a 50/50 chance on getting the correct exposure.  But… this is DIGITAL, and you will have a histogram with your exposure which will give you a baseline on which to adjust the exposure up or down! This is a good low cost way to get it spot on for the 2nd shot.  There is a down side to this though, if the shutter speed is long, then you have to wait the same amount of time after the exposure for the in camera noise reduction software to run.  This means that a 8 min shot becomes a 16 min wait!  Workable but time consuming.
  • Leave your ND filter OFF the camera, in manual exposure mode: Compose, focus and meter, then screw in the ND filter and adjust the exposure manually to account for the addition of the ND filter.  You must be careful to  NOT change the focus by screwing on the filter. The exposure adjustment must of course be correct.  Leave the aperture sat at a standard value like f/8 and do your adjustment via the shutter speed.  So for a exposure of f/8 at 15 seconds with no ND, the addition of  a 6 stop ND will change the exposure to f/8 at 15 minutes!  you need to be able to do this in your head.
  • Use a hand held meter like the Sekonic L758DR spot meter.  This meter allows you to set in a filter based exposure compensation of +/- 10 stops.  You decide upon the ND filter you wish to use, dial in the exposure compensation into the 758 and meter on a spot in the scene that you desire to be 18% gray and the meter will give you the proper exposure settings!

Using the Sekonic L758DR Spot Meter with the Fuji X-E1 Camera system for Long Exposures…

Now, it is time to go through exactly how I created these images using the spot meter and the Fuji!

The scene as seen...

The scene as seen from my eyes at the time I was setting up…

Above is how the scene looked like at 7:30 pm (dark) when the image was taken.  As you can see it was so dark that the only way to focus was to use the bright spots of light on the pier  to manually focus, then pot meter on the sky with the L758DR meter.  This gave an initial meter reading of f/22 @ 2 seconds thus making the sky 18% gray (too dark for me) with ZERO exposure compensation dialed into the meter (not yet adjusting for the 6 stop ND)!  Now, adjusting the meter for the 6 stop ND filter by entering 6 stops of exposure compensation, the reading became f/22 @ 2 minutes but with the sky still at 18% gray.  My imagined, finished image was one with the sky 2 stops brighter, or moving the spot metered point from Zone 5 to Zone 7 which is 2 stops!  So I simply added 2 more stops and moved the shutter speed to 8 minutes (2 stops brighter) and shot the image.

Normally, I would have the 6 stops of compensation dialed into the meter ahead of time and make this a 1 step process.

So here is the resulting image…

f/22 @ 8 minutes with a 6 stop ND and moved to Zone 7

f/22 @ 8 minutes with a 6 stop ND and moved to Zone 7

I am showing you the images in B&W so that you can better visualize the shades of gray to see the 18% moved from Zone 5 to Zone 7!  The Sekonic is very easy to use and is a true 1degree spot meter.  To dial in the 6 stops of exposure compensation I held down the  ISO1 and ISO2 buttons and turned the control dial.  The meter reading adjusted for the ND filter and gave a perfect exposure the first time!

71M770oi3RL._AA1500_

Sekonic L758DR Spot Meter

The exposure compensation shows up on  the LCD screen so that you know what you are actually measuring.  You could have easily set it to 4 instead of 6 and that would have taken the move from zone 5 to zone 7 for you but I prefer to do that adjustment in my head!

Zones…

Simply stated the Zone System (Ansel Adams), assigned a series of stepped gray changes, 1 stop apart and across a valued scale of 10 stops with Zone 5 being 18% gray which is where ALL camera and handheld meters place the exposure.  By looking at the chart below you can see the change between Zone 5 & 7 (2 stops) and what difference it will make on the brightness of the sky!  I use the Zone System in ALL of my exposure calculations and it is how I see contrast changes across my image!

The Zones...

The Zones…

There are plenty of great books out there that will teach you the Zone System of exposure control and adjustments! Here are 2 on Amazon:

Here is how you would apply actual Zone values to an image.  Then you can shift the exposure to move the metered Zone up or down to adjust the overall brightness of the image!

Using Zones to understand what your meter sees...

Using Zones to understand what your meter sees…

Now given the meter reading for Zone 5 you can change the exposure up or down to brighten/darken the overall image!  Combine Zone Exposure techniques with Long Exposure photography then  you can see how easy it is to control your final image.  Plus if you use a handheld spot meter that allows for +/- 10 stops of compensation  then you can see how easy it becomes to get a good exposure that is measured in seconds  or minutes!

Here is a simple explanation of what each Zone looks like:

The Zone System explained.

The Zone System explained.

Here are a few more images taken this night on the beach!  I hope you enjoyed both the article as well as the images!  Please let me know!

250 second exposure, Fuji X-E1

250 second exposure, Fuji X-E1

30 second exposure just before sunset

30 second exposure just before sunset, Fuji X-E1 shifted to zone 7

A DETAILED look at X Pro 1 long exposures….


The Fuji X Pro 1 camera system is VERY WELL suited to this style of photography!

Outer Banks FIshing Pier Sunrise, Fuji X Pro 1 + 10 stop ND filter

Avalon Pier Sunrise, 30 second exposure

I just got back from leading an advanced photo workshop & excursion to the outer banks on Nags Head Island in the Outer Banks!  The subject was HDR and Long Exposure Photography.  It was an amazing workshop filled with great students and we visited amazing locations.  What was so special about this was the sunrise locations at the Avalon Pier (which was broken into 3 parts) and the Outer Banks Fishing Pier.  The wave conditions were a little high due the the North Easter having just passed and made for tough long exposures due the the required shutter speeds!

As you can see with the image on the left, the waters surface was still a little bit misty even with a 30 second exposure.  The light was simply too bright and the waves too large to get a slower shutter speed.  Still, the image is pleasing and as you can see from the blue sky it is just after the sunrise was finished.

Ok, some discussion on equipment is in order here.

  • A sturdy tripod is a must.  It must be able to hold the camera steady even if the water washes over the tripod legs.  I use a large Gitzo Carbon Fiber Tripod with the Really Right Stuff large ball head on top.  The X Pro 1 has the Really Right Stuff L bracket installed.  This system works very well.
  • A remote shutter release is also a must.  The X Pro 1 can only use a mechanical one so I have two in my bag, a 14 inch and a 40 inch.  Both have a BULB lock which enables you to lock the shutter open.
  • A 10 stop and 6 stop ND filter.  I like the B+W versions due to their German Schott Glass construction.  BUT, be aware, the X Pro 1 (in fact most camera systems) cannot meter through the 10 stop ND filter.  If you have a hand held spot meter you can get accurate exposures even with the ND filter!
  • A lens hood is an absolute must for long exposures.  This will keep light from striking the objective element of your lens and reducing contrast and causing lens flare.
  • Know where the sun is going to rise!  There are several great apps for smart phones out there that will tell you this right on the spot!

For rough seas, the longer you can get the exposure the smoother the water will become.  The X Pro 1 will allow up to a 30 second exposure in the T mode. You simply use the arrow keys to change the exposure up or down, but 30 seconds is the max.  For longer, you must use the BULB mode.  The Fuji has a very well designed  BULB mode!  When you trip the shutter, a counter will start on the back LCD screen counting up!  This makes for very easy timing control.  Here then is an example of a 90 second exposure in both Black & White and color.

Outer Banks FIshing Pier Sunrise, 90 second exposure with the 35mm lens. Exposure: 90 seconds, f/16, ISO 200, 10 stop ND filter.

Outer Banks FIshing Pier Sunrise, 90 second exposure with the 35mm lens. Exposure: 90 seconds, f/16, ISO 200, 10 stop ND filter.

Voigtlander Heliar 75mm f/1.8 Lens

Not all long exposures require such a long shutter speed.  For some a shorter speed can generate a nice image as well.  Here are two for your consideration.  The first is simply a daylight shot of a creek mouth into the bay but with the exposure slow enough to smooth out the water and show a little pattern there! This was a 15 second exposure using the incredible Voigtlander Heliar 75mm f/1.8 Lens with the Fuji M mount adapter shot at f/16 and ISO 200.

Mid Day Creek Mouth, CV 75mm f/1.8 lens.

You can see patterns in the water just at the point on the right side.

The second image is of the Roanoke Marshes Lighthouse at sunrise. This was a .3 second exposure at f/3.2.  This image was a bit challenging as I wanted detail in the front of the lighthouse.  I used a Sekonic 758 DR hand held spot meter to measure the building and set the exposure accordingly. This is a very easy to use metering system and will NEVER fail you in use.  Sometimes you simply cannot use the cameras metering system to get the proper exposure.  This is always a factor when you are using ND filter attached to the lens!

For this shot I used the Fuji 35mm lens with a lens hood attached to keep incident light from striking the objective element at an angle.

X-Pro1-Roanoke Marshes Lighthouse Sunrise

Here are a few more sample images for you to think about.  I hope that you enjoy them!

Avalon Pier Sunrise

Outer Banks Fishing Pier Sunrise, 60 second exposure

Sunrise

60 second exposure, Outer Banks FIshing Pier Sunrise

So, take heart, get a ND filter and go out and try some long exposures at sunrise or sunset. If you do not have access to the ocean then use the exposures to slow the motion of the Clouds!  There are all sorts of possibilities out there for you to experiment with!

Voigtlander Heliar Ultra Wide-Angle 12mm f/5.6 Lens and the Fuji X Pro 1


Good things that come in small packages!

Voigtlander Heliar Ultra Wide-Angle 12mm f/5.6 Lens

Fuji M Mount Adapter

I have been testing the Voigtlander Heliar Ultra Wide-Angle 12mm f/5.6 Lens with the Fuji M mount adapter on the X Pro 1 for the last week or so and have to admit that I am both impressed and love use and feel of this lens! It is well made and smoooooth to operate!

 I have tested it both on the Kipon adapter and the new Fuji M mount adapter and have to say that the differences between the two are major due to the fuji’s ability to adjust corner color and darkened corners live with version 1.11 firmware!  Pincoushion adjustments still require you to shoot and adjust.

I adjusted the pincushion by taking a picture of the pattern of 2×4’s on the surface of a deck. This allows you to maintain straight lines. I found for the 12mm that an adjustment of +4 was perfect.

I took the  12mm out to two locations for testing, Shem Creek in the Charleston, SC area and the waterfront in Georgetown SC.  Both locations provides nice vistas and shrimp boats full of color and character.

Stormy Seas at the dock. Voigtlander Heliar Ultra Wide-Angle 12mm f/5.6 Lens. Notice the focus from about 3 inches to infinity.

As you can see, the DOF of the 12mm is simply amazing.  The cleat was about 3 inches from the camera.

Here is a monochrome of the same image.

Shem Creek with approaching storm, Voigtlander Heliar Ultra Wide-Angle 12mm f/5.6 Lens

Shem Creek Shrimpers, Voigtlander Heliar Ultra Wide-Angle 12mm f/5.6 Lens

Notice the light rays coming down from right to left thru the clouds!  The lens is VERY sharp and a real pleasure to use!

Let me know what you think!

Using Light Painting with Very Long Exposures!


Bringing Out Foreground Details..

A few months ago Jamie Davidson and I led a photo workshop and excursion to Charleston, SC. The workshop was in both Infrared and Color photography and we had several sunrise shoots in various locations.  One of my favorites was on Foley Beach looking out at the Morris Island Lighthouse.  There was a groin  (rock break wall) there as well as a boneyard (driftwood forest).

Morris Island Lighthouse Sunrise

My Vision:

What I had in mind was to photograph the  Morris Island lighthouse in silhouette  with the sun rising behind it with driftwood in the foreground as a very long exposure to flatten the ocean surf.  I also wanted to have some surface detail in the driftwood and beach in front of the camera so I knew that I would have to use a very high power flashlight to paint those items during the exposure. Long exposure photography will generate very etherial images that will draw the viewer into the image.  Learning how to generate these types of images is a very worth while endeavor and I hope that you are interested enough to experiment with it as well!

My Equipment:

  • I wanted to shoot this with my Fuji X Pro 1, but at that point I was still waiting for its delivery.
  • Canon 7d camera body.
  • Canon 17-40L lens.
  • Remote shutter release cable.
  • A very stable carbon fiber tripod!
  • Sure Fire U2 variable LED tactical 100 lumen flashlight.
  • Fortitude to get up very early and drive/walk out to the beach (no small task!).

Singh Ray Variable ND

After arriving on site, I looked  for a suitable piece of driftwood to place in the foreground and have it frame the lighthouse.  I setup back about 20 feet so that I could get enough depth of field to have both the tree and the lighthouse both in focus. Setting up the tripod well back from the surf to keep the water from under cutting its legs I framed the shot above.  It looks bright enough but it was so dark that I could not even see the tree!  Please keep in mind here that I also wanted to slow down the movement of the water, so I have installed a variable 8 stop neutral density filter from Singh Ray on the lens.  Even at its minimum setting there is still a 2 stop darkening of the image throughout he viewfinder.  What I am looking for is an exposure time of at least 30 seconds  but longer if possible. What I do is to set the ND at 2 stops then use the flashlight to provide a bright spot for focus. After focusing, I setup the camera in manual mode by adjusting the aperture to f/11 to f/16 and the shutter speed to a starting point of 30 seconds.  I then adjust the variable ND filter to give me a 0 ev exposure in the metering system!

It is this special filter that allows me to really slow down the shutter speed  enough to smooth out the ocean surface!  You do not have to use a variable ND, a set filter like a 6 or 10 stop ND from B+W filters will work fine, but you have to setup the composition and focus before you attach the filter because you will not be able to see through the viewfinder once it is installed.  All of these ND filters are expensive, the B+W ND’s will be over $100 and the Singh Ray will be just at $400!  But EVERY photographer needs some sort of ND filter in order to slow down the shutter speed to smooth out water or cloud movement for a soft etherial image.

The viewfinder must also be covered up once everything is set and before the exposure is made in order to not effect the camera meter.

Ultra Bright Tactical Light

Trip the shutter and step away from the camera/tripod.  Now taking the ultra high power flashlight I use it to paint the surface of the tree and sand around it.  This is a continuous movement of the flashlight over the tree and sand again and again.  I do not want them brightly lit, rather I am looking for just enough light to ensure that the tree is  not a silhouette and that the sand has some detail and structure in its surface.  This can be difficult and you might have to walk closer to the tree in order to have more light from the flashlight fall on it.  But being digital we can take several images before the sky becomes too bright to work!

You can use any light source but you do need to be careful not to use a light that is yellow in color.  The tactical lights are expensive but do not fail due to the bulb and will last a lifetime.  At high power the batteries will only last for an hour or two, but most of these lights have several power levels and can stretch the battery life up to 20 hours!  They are great for photography but they can also save your life in an emergency as well.

Here is a Black & White version of the image above.  This was converted in Photoshop CS6 with Nik Filters Silver EFX Pro 2.

Morris Island Lighthouse Sunrise

If you look up at the very TOP of this page you will see my Blog Banner Image, which was also taken at this location within moments of the Lighthouse image!  This type of photography (long exposure can be very pleasing in it process and is certainly easy on the eyes!

Below is one further image, this time taken by the Fuji X Pro 1 without light painting in the mid morning.  For this image I did use a 52mm B+W 10 stop ND filter, but no light painting as it was already too bright out and was not necessary.

Ultra Long Exposure with the Fuji X Pro 1

Please let me know what you think!

Pin Hole Photography Primer…


Today is the day!  Get out your Pin Hole cameras and go shooting!

World Wide Pinhole Photography Day, 2012!

Fuga City Detail, Pinhole image, Panasonic GH2 with the PinWide f/127 pinhole plate.

Today is the world wide pinhole photography day.  Thousands of folks around the world are out shooting pinhole images today and posting them on the http://www.pinholeday.org/ web site.  It is great fun and takes us back to an era when photographic experimentation was the word of the day!  A pinhole camera system is one without a lens. I simply has a VERY SMALL hole thru which the light passes and creates the image on the back of the camera on film or sensor.  You can purchase pinhole plates for most cameras made today plus you can easily create one of your own!

Do a little research here on the net thru Google and you will find a ton of information on it.  But remember today is the yearly big day!

I have pinhole plate adapters for ALL OF MY CAMERA systems.  There are many companies who make them.  Here is a short list to get you started:

  • Skink (ebay) (For ALL cameras)
  • Pinwide (for Micro 4/3)
  • Lenox Laser (good selection of models for various cameras!
  • Lens Baby

Here are what some of these plates look like…

Pinhole images are typically not very sharp, BUT they are at the same sharpness from the very front edge of the pinhole plate to infinity!  They can be created with one to several pinholes and there is no limit to how the film can be placed, flat, curved, round and so on!  For digital systems, you can indeed have multiple pinholes, but only a flat sensor.  They can and will create very etherial images that are very pleasing to the eye and great fun to create!

Here are some example images of my own pinhole creations, please let me know what you think!!

Pawleys Marsh Pinhole image. Leica M mount Skink f/207 pinhole plate at 3.2 second exposure

Pawleys Marsh Pinhole image. Leica M mount Skink f/207 pinhole plate at 3.2 second exposure

Fuga City Detail, Pinhole image with the Pin Wide f/127 pinhole plate.

Fuga City Detail, Pinhole image with the Pin Wide f/127 pinhole plate.

Tybee Island, GA, Hidden Paradise!


Once here it is difficult to leave!

Tybee Island Beach in front of our rental!

Every year I try to make it down to Tybee Island, GA for a visit.  It is one of the hidden treasures of the Southeast coast!  There are two lighthouses there, shrimpers, beaches, birds and many more photographic subjects!  Last year, my wife Ellen made arrangements for a family vacation there with a rental right on the beach.  There were 9 of us there in all and we had a great time!  For me the exciting parts of the week were the photographic excursions out and about.  I am always excited to visit the same places many times as they will always present themselves in a different fashion on each visit!  Below is a small selection of the many things to experience while visiting…

The sand on the beaches there is a fine off white sugar sand and the kids loved to play in it.  There were ALWAYS large ships lined up  to leave and enter the river going up to the port!  Every morning there were shrimp boats going back and forth just off of the beach fishing!

The Tybee Island Lighthouse is a MUST SEE!  It is one of the better looking lighthouses on the coast and always makes a great photographic subject!

Tybee Island Lighthouse in 590nm Infrared.

Cockspur Lighthouse , the 2nd local light house is up the river a mile or so from the Tybee Island Lighthouse.  You can visit it by heading north off of Tybee Island and stopping just before the first bridge and taking the small dirt road off to the right to the marina.  You will then have access with a longer lens to photograph it.  I have done this many times but for this trip we took a Dauphin boat trip out into the river and went around the lighthouse several times.

The Cockspur Lighthouse in Tybee Island.

One of the more interesting things about Tybee Island is the fact that during the summer there are usually daily thunderstorms the come thru the area and this makes for a good opportunity to grab some high speed lightning shots!

High speed daylight lightning capture from the deck of our rental!

Tybee Island is worth taking the time to visit anytime of the year.  Go for a day or a week, you will not be disappointed!

My grandson Jordan pondering the lighthouse keeper's hat as he gets ready to climb the lighthouse stairs!