Leica M Monochrome Magic….


A new camera come homes to live!

 

Leica M Monochrome

Leica M Monochrome

 

About a month ago, my truck was broken into and a camera bag was stolen with several Leica lenses, cameras and accessories.  After the insurance was paid, I purchased the amazing Leica M Monochrome and the Tri-Elmar 16 – 18  – 21 mm lens to replace 3 missing lenses and 1 camera.  

The M Monochrome is truly an amazing camera and the images are beyond stunning! I have found that I actually enjoy using it more that the M 240.  So far, I have used it for ultra long exposures in the Outer Banks, family pictures of my grand children during Christmas and on a just completed trip to Boone, NC for the New Year.  I am NOT going to do a review here rather I will just show the capabilities of this camera system while photographing my favorite subject matter!  

Duggars Creek Falls, Linville, NC   32 second exposure

Duggars Creek Falls, Linville, NC 32 second exposure, 6 stops of ND

Leica Macro-Elmar-M 90mm f/4

Leica Macro-Elmar-M 90mm f/4

The water fall image above was taken on 1 Jan 2015 at Duggars Creek Falls in the parking lot of the Linville Falls visitor center where I sat on a bridge centered over the stream (I cannot get down to the water level due to a recent operation which limited me to just basic views). Notice the sharpness of the image and the tonality of the rocks drawing the viewer into the scene.  There was very little post processing on this image which shows the real power of the Monochrome! For this shot I used the Leica Macro-Elmar-M 90mm f/4 lens which is an amazingly tiny yet sharp lens! This image simply takes my breath away with it sharpness, tonality and the way it draws the viewer into the image.  This is one of my planned images for a Platinum/Palladium print in a few weeks!

This camera is going to be the cornerstone of a old (new for me) printing process where I will be making LARGE contact negatives on an Epson 7900 printer to use in the making of chemical based Platinum/Palladium metallic prints exposed with a high intensity UV lamp set and chemically developed.  All of the images are B&W so the high resolution images generated with the Monochrome will work perfectly with this printing process.

When used with a high quality ND filter set from B+W the most amazing Long Exposures are possible and this camera simply delivers!

The set of ND filters that I keep in my kit for in sizes for each of my Leica lenses  from B+W are:

  • 103  –  3 stop ND
  • 106  –  6 stop ND
  • 110  –  10 stop ND
Outer Banks Fishing Pier, 250 second Exposure

Outer Banks Fishing Pier, 250 second Exposure

Here is an example taken on the Outer Banks of North Carolina prior to sunrise with 6 stops of ND filter and a 250 second exposure!  I used the 50mm Summilux ASPH lens for this image. Look at the tones and graduations of the grays.  Simply amazing…

Roanoke Marshes Light, 8 second exposure

Roanoke Marshes Light, 8 second exposure

Another example is this image of the Roanoke Marshes Lighthouse taken about a month ago at sunrise. The detail in the clouds and water prove the ultra wide dynamic range that this camera is capable of!

Jordan, my grandson on his new Christmas drum set taken with the Monochrome and the  Leica SF 58

Jordan, my grandson on his new Christmas drum set taken with the Monochrome and the Leica SF 58

Leica SF 58 Flash

Leica SF 58 Flash

For people, I have been coupling the M Monochrome with the Leica SF 58 flash which is simply a pleasure to use and is fully integrated with the M electronics! The camera and flash are so well functionally  balanced that it will blow your mind when you pick them up to shoot!  Audio indications from the flash for performance and a dual flash head that allows a straight on light plus a bounced light!

As you can see from the image of Jordan, it is exceptionally well balanced and the tonality is perfect yet there is no overt indication of flash in use!

I have used a Sekonic DR750 spot meter along with special software and target to measure the dynamic range of this camera when shooting in RAW (DNG) and get 11 to 13 stops dependent upon the ISO setting being used.  Who says that paying big dollars for a camera system doesn’t guarantee big performance!   

The system simply amazes me…..

If you have any comments or questions on this post please send me some feedback and I will answer to the best of my ability!

Outer Banks Fishing Pier, 250 second exposure.

Outer Banks Fishing Pier, 250 second exposure. Note the moving clouds!

Advertisements

Fuji X100s 830nm Infrared and Long Exposures


It just keeps getting better….

 

Pawleys Pier, 830nm 300 seconds, f/16, ISO 200

Pawleys Pier, 830nm 300 seconds, f/16, ISO 200, 8 stops of ND with the 10 stop B+W 110 ND filter

 Normally you do not see much in the way of Long Exposure  photography in the Infrared world.  The reason is that it is necessary to use Neutral Density filters (ND) to cut down the amount of light reaching the sensor to enable very long shutter speeds.  The infrared spectrum will reduce the the effective value of any ND filter that you attach to your lens from between 20% to 30%.  Have you ever taken a photograph of a person wearing a pair of sunglasses in infrared and noticed that they are totally clear?  This is the effect that I am talking about.   The general rule is that the cheaper filters suffer much greater loss in infrared and the variable ND filters do not work well at all (yes, even the expensive Singh Ray).  

B+W 110 10 Stop ND

B+W 110 10 Stop ND

Should you desire to pursue this style of photography I strongly suggest that you purchase and use B+W ND filters which loose around 20%.  I am also told that Lee filters do not loose too much effect as well but I have not yet tested them even though I own them all.

The B+W ND filters display the ND values on the side of the ring, but the easiest way to understand them is to simply look at the 3 digit number.

  • 110 equals 10 stops
  • 106 equals 6 stops
  • 103 equals 3 stops
  • 102 equals 2 stops
  • 101 equals 1 stop
Fuji X100s

Fuji X100s

I am using the Fuji X100s for the images in this post.  It is a 16 mpix camera that is a rangefinder styled system.  I includes an internal, drop down 3 stop nd filter that actually gives about 2 stops of reduction when used in the infrared spectrum.  I had the camera recently converted via Kolari Vision, http://www.kolarivision.com to what they call the Dual Spectrum conversion.  This is where the internal UV/IR blocking filter is removed and a strong UV filter is put in its place.  This gives you the same capabilities as any Full Spectrum conversion except that it will not work with any IR or UV filter that combines multiple spectrums that include UV.  This means that the 047b in camera Faux Color or Super Blue filter and the UG1 UV/IR dual band filter will Not work.  All of the others work fine from 590nm up!

Plus you can convert the camera back to normal visible color with the addition of a filter on the lens to block UV and IR.  With the Full Spectrum filter you need to stack the B+W 486 reflective UV/IR blocking filter with the LDP http://maxmax.com  CC1 absorption filter.   With the Dual Spectrum conversion you need only add the B+W 486!

So, I have ALL of the normal IR filters sized for 49mm which is what the X100s uses including the B+W 486.  I am using the B+W 093 820nm IR filter for this camera almost 100% of the time though.

Another nice thing about the X100s is the fact that it has aperture priority mode with a shutter speed up to 30 seconds and a BULB MODE that goes up to 60 minutes!   Where the X100 really excels is the fact that is gives a count up timer in the viewfinder or on the back LCD panel for timing your bulb exposure!

The camera is so small and easy to handle that it is a pleasure to work with and as you can see, the images are stunningly sharp!

I will be posting more long exposure images here in the future and discussing the various post processing recipes with you.  Now, one last image.  Here is the same shot with only the 3 stop internal filter engaged in the X100s.  The shutter speed at ISO 200 and f/16 was 1/6 second.  Not nearly long enough to slow the water down or blur the cloud movement but it would likely work for slowing down the moving water in waterfalls!

Pawleys Pier, 830nm IR, 3 stop internal ND, 1 second, f/16, ISO 200

Pawleys Pier, 830nm IR, 3 stop internal ND, 1 second, f/16, ISO 200

If any of you all out there shooting in Infrared work in long exposures please drop me a line or comment and we can share data about the various ND failures and successes!

You can also consider signing up for one of my (along with  Jamie Davidson) Infrared/Color Workshops.  We take you to amazing locations in the South East Coastal area for world class photography and INTENSE post processing classroom training!  You will find posts here talking about each workshop as it approaches!

Going to the Dark Side: 830nm Infrared and the Fuji X100s


830nm Infrared Conversion on the Fuji X100s

 

Oak Reflections, 830nm

Image 1:  Oak Reflections, 830nm

 

Infrared photography with digital camera systems have been around for several years now and a lot of photographers have embraced this different spectrum of photography.  Infrared is wildly popular in photography and fine art galleries now and my workshops are full of lots of talented photographers who desire to learn or expand their infrared skills.

Pawleys Marsh, 830nm X100s

Pawleys Marsh, 830nm X100s

The typical starting point for most infrared shooters is 720nm (standard) or 590nm (Goldie) IR conversions. We have all seen the amazing color images that these two conversions can generate. As previously discussed, we always process not only in Faux Color, but for B&W also. The B&W images are usually more accepted among the arts community though.

Pawleys Marsh, 720nm

Image 3:  Pawleys Marsh, 720nm

 

But did you know that with each increase in the IR Nano Meter band (the frequency goes down as the number goes up) that the contrast levels go up in B&W as well? This increase in the NM band starts to generate the most stunning, contrasty, ethereal images that have to be seen to be believed! The higher you go in the NM range also increases the white “glow” around the leaves and grass and the blue sky takes on a deep black. This effect is named the “Wood Effect” after doctor Robert Wood who discovered it 1910. What happens is that the leaves get a bloom or glow of white around them that generate that wonderful ethereal feel in the image. Take a look at image 1 which was taken at 830nm. Do you see the dark black where the blue sky is? Look at the leaves on the trees and how they take on the pure bright whites! Now compare that to 720nm image above in Image 2. The most striking difference is the gray sky rather than black, plus the leaves are grayer rather than white.

Shrimp Boat at 830nm

Image 3: Shrimp Boat at 830nm

 

I would like to suggest that if you shoot in IR or are interested in doing so then you should consider a deep contrast IR conversion beyond 800nm. There are a lot of benefits to be found in that spectrum. This new spectrum sees ONLY in B&W, which will force you to visualize your scene in B&W.

 

The benefits to a Deep B&W IR conversion are:

  • Extremely sharp images.
  • Wood Effect bloom on plant leaves.
  • Dark moody skies.
  • Only works in B&W
  • Post processing is easy and quick using Nik Viveza and Silver EFX for texturing and contrasts. Photoshop CC, Elements or Lightroom, they all work for Deep B&W IR!
  • White Balance is easy.

 

Mabry Mill, 830nm

Image 4:  Mabry Mill, 830nm

There are several ways to have a camera converted to deep B&W above 800nm.

  1. The easiest is to simply take ANY digital and have it converted by removing the internal UV/IR blocking filter and replacing it with a 800nm, 830nm or a 850nm internal filter. With this type of conversion you can use any digital camera type or style because only the sensor will see the infrared light and you will either see the scene via the optical path or via a live view from the sensor. Typically, this type of conversion should cost around $300 to $350 thru any of the normal conversion companies.
  2. If you are shooting a Full Spectrum or Dual Spectrum conversion then you can purchase and attach a B+W 093 830nm filter to your camera lens! This filter blocks ALL visible light so you MUST have a camera with a live view only to use this otherwise you will never be able to see thru the optical path to focus and compose. The Full Spectrum camera is one that has had the internal UV/IR blocking filter removed and replaced with clear glass and the Dual Spectrum conversion is where the internal UV/IR blocking filter is removed and replaced with a strong UV filter.
Rock Run Mill, 830nm

Image 5:  Rock Run Mill, 830nm

 

With either the full or dual conversions you can shoot every of the following light spectrums:

  • Ultra Violet                                               Full Spectrum *
  • UG1 UV & IR                                            Full Spectrum *
  • 047b In Camera Faux Color                  Full Spectrum *
  • 530nm Faux Color                                  Full & Dual Spectrum
  • 590nm Super Color                                Full & Dual Spectrum
  • 630nm Pinkie Faux Color                     Full & Dual Spectrum
  • 665nm Enhanced Color                        Full & Dual Spectrum
  • 720nm Standard                                    Full & Dual Spectrum *
  • 800nm B&W                                          Full & Dual Spectrum *
  • 830nm Deep B&W                                Full & Dual Spectrum *
  • Normal Visible Color                            Full & Dual Spectrum

* Requires Live View capable camera

 

Now, Normal Visible Color simply means that your camera can take normal color images as it did from the factory! This means that you have a multi purpose camera that can take anything.

The only issue is that if you have a Full Spectrum conversion you need to stack a B+W 486 reflective IR/UV blocking filter on your lens with a LDP CC1 absorption filter to get back to good normal color.

For the Dual Spectrum conversion you only need to put the B+W 486 reflective IR/UV filter on your lens and it is back to normal color!

Disadvantages to the Full or Dual Spectrum Camera Conversion:

  • More expensive to convert.
  • External filters for each of our lens sizes.
  • Color filters (530 – 665nm) are not expensive but the B+W 093, B+W 486 and the LDP CC1 filters are VERY expensive.
  • Your camera MUST have a live view mode to focus and compose.

 

Charlotte Marie, 830nm X100s

Image 6:  Charlotte Marie, 830nm X100s

 I have several cameras converted to above 800nm and several full spectrum and a new dual spectrum converted Fuji X100s. The images that I am getting from the Fuji with a B+W 093 830nm filter are the sharpest and most stunning deep IR images that I have ever produced! But that doesn’t mean that you need to go out and purchase that one. Any camera with live view will work great with the 830nm spectrum. Keep in mind though, that the more modern your camera is the higher the usable ISO will be!

You can contact Mark at his web site at http://www.MarkHilliardAtelier-blog.com for information on his Color & IR workshops, which he teaches with Jamie Davidson, and for his IR Post Processing DVD Tutorials!

Fuga City, 830nm, Georgetown, SC

Fuga City, 830nm, Georgetown, SC

 

Going Home to Momma with the Leica M7…. Film Photography Returns!


Ahhh… It Feels So Good!

Rollei IR400 Film - Leica M7 50mm Lux - Rodinal 1-50

Spring in the South…  Rollei IR400 Film – Leica M7 50mm Lux – Rodinal 1-50

Oh my, I do NOT know where it came from but I got the BUG again for more film photography!  I have a cabinet here in the Gallery just full of old film cameras plus a Leica M7 film body that works with ALL OF MY M MOUNT LENSES!  (see the last post HERE for more info on the lenses).  I decided to purchase a new stock of several films:

  • Kodak Tri-X 400, Ohh
  • Eastman Double X 200, Ahh
  • Rollei IR400  400, WOW!
  • Kodak Tmax, Ho hum…
  • Ilford HP5+ 400
Rodinal One Shot

Rodinal One Shot

I picked up some stainless 2 roll developing tanks with a bunch of Hewes (don’t skimp on your reels, buy the best!) Stainless Steel 35mm Reels.  For developing I like Rodinal One Shot due to its ease of use and a life span of around 40 years.  I simply mix it one tank at a time usually at a 1:50 ratio with water using a small syringe. It allows a very wide latitude of contrast and iso control.  I have used several other developers but I keep coming back to Rodinal!

Now, I am playing with several cameras. As I said my main and BEST camera is my Leica M7.  But here is a current list of those cameras I am using:

  • Leica M7 with Leica & Voigtlander Lenses
  • Petri 7s, 1962 
  • Olympus XA
  • Olympus 35 RC 
  • Shen Hao 4×5 Field Camera (about 12 years old)
1962 Custom Petri 7s Film Body

1962 Custom Petri 7s Film Body

The Petri 7S has been in my hands since 1962 and still shoots great ( I did send it off to have the light seals replaced and a new leather covering ). The Petri has no batteries but rather a solar cell around the lens that drives a needle exposure meter that you simply place into its center notch for a good image!

All of the cameras in my list above have proven reliable  but with the Petri you get a link to the past, specifically MY past as this was my 2nd camera I owed when I was young!

The Olympus 35 RC is an amazing small rangefinder with very nice controls.  It is smaller then the Petri 7s and actually has better control functionality.  It does require a battery to run its metering system though which is a step down from the Petri 7S in my opinion.  The nice thing other than the size is the fact that EVERYTHING is displayed inside of the viewfinder.   Unlike a refurbished Petri 7S which can be found for around $100 used on Ebay, the Olympus 35 RC camera refurbished is demanding around $250!  This is a big difference in price and tells you a lot about its quality and demand! I was lucky to find one from a collectors inventory that he sent off to be totally refurbished and re-skinned for much less than $200.00!  For you film shooters out there on a budget this is the camera that I recommend if you find yourself desiring a rangefinder.

My Custom Olympus 35 RC

My Custom Olympus 35 RC

The Olympus XA was a 35mm rangefinder camera built by Olympus of Japan. It was one of the smallest rangefinder cameras ever made, together with the Contax T.

Olympus-XA

Olympus-XA

It was designed by Yoshihisa Maitani who had joined Olympus Optical Co Ltd in 1956. He was the chief camera designer and managing director of Olympus Optical Co Ltd., having developed a number of legendary cameras during his career. These included the Pen series, the OM series, the XA series, the IS series and the [mju:] series of cameras.

The original model, the XA, was sold from 1979 to 1985. The original XA features true rangefinder focusing, a fast 35mm f/2.8 lens, and aperture prioritymetering. The lens was protected by a sliding dust cover.

This is the smallest 35mm rangefinder ever made.  It will fit in the palm of my hand and will make a great system to have with me everywhere I go!

The Leica M7 uses batteries and sports a center weighted spot meter measured either off the film or off the shutter.  I find that it meters very reliable. It is the top of the heap when it comes to 35mm film cameras.  There are a lot of high end rangefinder cameras on the market but the Leica is the top.  I really excels in the area of long exposures with either a count down timer  in the viewfinder for images metered and controlled in the aperture priority mode or a count up timer for exposures done in the bulb mode.  In bulb, it will count up to 16 min then stops counting for battery conservation, but will continue exposing until you release the remote shutter release.  It will use NO battery power after the 16 min count up timer turns off until you release the shutter then it requires a pulse of electricity to close the shutter.   NO other rangefinder can say this unless you use a pure mechanical camera like a Leica M2 which has no metering system at all.

The Leica M7 is surprisingly heavy but easy to handle.  I keep reading about other high end rangefinder bodies out there but when you do the comparison of features I always come back to the M7.

My Leica M7 Film Body

My Leica M7 Film Body

All of my cameras are fun to use and reliable.  With the Leica M7 you get the world class glass but with the Petri 7S you get a link to the past, specifically MY past as this was my 2nd camera I owed when I was young!  The Olympus 35 RC is an advanced rangefinder from the 1970 era and is slick and fun to shoot. You will see examples from these cameras towards the end of this post!

______________________________________________________

I usually develop my negatives on Sundays.  I have a film drying cabinet that I use to dry the film without dust spots overnight.  I then will scan the negatives on Monday or Tuesday using a Nikon 4000 ED film scanner at 4000 dpi into the DNG format for editing and cleaning later in the week.  I usually shoot 2 or 3 rolls a week.

Rollei IR400 Film

Rollei IR400 Film

My favorite film is Rollei IR400.  This is available at the big camera stores like Digitaltruth, Freestyle and B&H.  What makes this film so special is the fact that is very much like Kodak Tri-X 400 as shot.  It has a VERY THIN film base which really makes scanning easy.  BUT the most amazing thing about this film is that it is sensitive to INFRARED!  If you place a Hoya R72 IR filter on the camera lens the film will record 720nm IR images!  There is an ISO hit due to the filter being so dark down to 12 ISO but it is worth it being able to shoot in both normal B&W and IR B&W!

Next I like the Kodak Tri-X 400 film.  It gives great contrasts and has a very wide latitude in development.  It is well known and tested and for ultra long exposures.

Eastman Double X 5222

Eastman Double X 5222

Then comes Eastman Double X Cinema film.  This is a GREAT B&W film that gives a very smooth gradation and lovely warm tonality with slightly increased contrasts.  This is motion picture film so unless you are going to buy a 400 foot reel you will need to purchase it from the store at Film Photography Project. They will sell it in either 24 exposure rolls or a 100 foot bulk loader roll.  It develops nicely in Rodinal at 1:60 for ISO 200 but there are ratios for 100 up to 800 ISO!  This film is very much worth experimenting with.

I need to say a few words about the folks at Film Photography Project.  They offer  an amazing wide selection of films and old cameras!  This includes Polaroid cameras and film also!  Their Podcast is amazing and I find that it is so good that I now have it running all day while I am working at my gallery in Pawleys Island.  Good Stuff, check them out here:  Film Photography Project.

Whatever film you decide to use you will be pleased with the results. Processing is easy to do with a VERY small investment. You will need:

  • Film Camera
  • Film
  • Chemestry:  Developer, Stop (you can use water), Fixer and water bath with a Wetting Agent.  $40 to get started
  • Film drying hanger clips $3 for a bag of 2
  • Film tank, either stainless steel or a Peterson. Peterson tank and reel is about $40
  • Film tank reels (if stainless do not skimp on these).  Hewes Steel are about $25 each
  • Dark changing bag to move the film from the canister to the developing tank.   $40
  • You will also need some way to scan your film into a digital image or pay someone to do it for you.

That is it.  It normally takes me about an hour to develop 2 rolls.  I will let them dry for several hours then cut them into strips of 6 and put them into plastic storage sheets.

For scanning, as I said above, I use a Nikon 4000ED film scanner.  As you can guess from the name it will scan at 4000 dpi and has a lot of adapters for different types of film scan feeders.  It has slide auto feeders, single slide feeders, a 6 position film rail for troublesome film and an automatic roll feeder to scan entire rolls automatically.  If you couple this with VIEWSCAN software you have an amazing scanning system that rivals those that pro labs use!

Nikon 4000 ED system

Nikon 4000 ED system

Ok, lets take a look at the results of 3 types of film in 2 cameras!

Pawleys Pier  M7 Elmarit 28  Rollei IR400 film in Rodinal at 1:50

Pawleys Pier M7 Elmarit 28 Rollei IR400 film in Rodinal at 1:50 240 second exposure

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

Eastman Double X Film - 1962 Petri 7S  - Rodinal 1-50

Eastman Double X Film – 1962 Petri 7S – Rodinal 1-50

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

Rollei IR400 Film - Leica M7 50mm Lux - Rodinal 1-50

Rollei IR400 Film – Leica M7 50mm Lux – Rodinal 1-50

Rollei IR400 Film - M7 28mm Elmarit - Rodinal 1-50

Rollei IR400 Film – M7 28mm Elmarit – Rodinal 1-50

Rollei IR400 Film - M7 50mm Lux - Rodinal 1-50 240 second exposure

Rollei IR400 Film – M7 50mm Lux – Rodinal 1-50 240 second exposure

Rollei IR400 Film with R72 IR Filter - M7 50mm Lux - Rodinal 1-50

Rollei IR400 Film with R72 IR Filter – M7 50mm Lux – Rodinal 1-50

 

Rollei IR400 Film - M7 50mm Lux - Rodinal 1-50

Rollei IR400 Film – M7 50mm Lux – Rodinal 1-50

I hope that you enjoyed this post and its associated images.  I have been using film since I was 9 years old.  At 13 I had my first darkroom at home.  I worked in film in my own darkroom until I was 18 when that period of my life can to an end.  42 years later I re-engaged film photography again and cannot help but ask “Why did I wait so long?”  I have been shooting digital since my career at Eastman Kodak when you could ONLY get B&W digital camera systems!  I have spent fortunes on digital and have loved every moment of it.  Film will NOT take any of that away, I still have digital and continue to use it.  But I have to be honest and admit that working in film again fills me with a sense of peace that I have not experiences in a very long time….

Please let me know what you think of this post!

Leica M240 Digital..


Oh, No… Another Camera System…

Leica M240 24 mpx Digital

Leica M240 24 mpx Digital

Well, in a wild turn of events I have picked up some new camera equipment… This is a really no surprise as it is a sickness or rather addiction!   But onward and upward!  

I do have to tell you that I am REALLY excited over acquiring these new systems though.   And unfortunately, one thing has let to another and thus a long journey has also been started into the realm of film again!

But first let me highlight the “What”!

As you can see in the top image, the newest body is the new Leica M240 24 full frame 24 mega pixel body.  It also has a true “live view” which allows use of all sorts of other lenses like the Leica R series that you would NOT normally be able to focus.  This means everything from long telephotos to true macro (subject of the next post!). After a few months of use I can tell you that this is the BEST digital system that I have ever used!  Along with it I also picked up several lenses.

Leica 50mm Summalux ASPH f/1.4

Leica 50mm Summalux ASPH f/1.4

First, the main lens is the Leica M 50mm f/1.4 Summalux ASPH lens in silver.  This is a HEAVY lens.  If attacked by a bear I could use it to beat him half to death.  The lens itself has turned into my main lens that I use 60% of the time. It has a built in leans hood and takes 46mm filters.  The Bokah that this lens can generate is amazing beyond description. It is extremely smooth and easy to use and generates images that are truly amazing!

Tulip at f/1.4, Leica 50mm Summalux ASPH

Tulip at f/1.4, Leica M240 w/ Leica 50mm Summalux ASPH

 

Leica 28mm Elmarit ASPH

Leica 28mm Elmarit ASPH

The next lens is the Leica M mount 28mm f/2.8 Elmarit ASPH.  This is a TINY light lens that takes 39mm filters.  These smaller filters sized considerably cut the cost of purchasing top of the line B+W filters.  Since the M240 camera is a full frame sensor the 28mm really is 28mm! The lens is sharp beyond words and quick to focus.  I am really please with this lens and use it for landscapes and lightning photography when mounted on my Fuji X-T1 camera.

The example image for this lens below is a texture overlay.  The main image was an Infrared image taken by placing a R72 (720nm) infrared filter on the lens giving a white IR image of a palm leaf, then doing a texture overlay of colored flowers.

 

M240-1916-Palm Overlay-2014 in both 720nm Infrared and Color

M240-1916-Palm Overlay-2014 in both 720nm Infrared and Color

 

Leica Macro-Elmar-M 90 mm f/4

Leica Macro-Elmar-M 90 mm f/4

The next lens is the Leica Macro-Elmar-M 90 mm f/4 and its macro adapter with split image view.  This is a very unique lens in that it collapses for storage.  By itself it is a great 90mm lens and has proven useful for mid range subjects as well as for Infrared work with the addition of a R72 IR filter.  When you add its macro adapter (extension tube coupled to a viewfinder modifier) it will then give you macro capabilities down to a 1:3 image ratio!  Below is an example of a macro image shot with this lens last week at Moore Farms in Lake City .

Leica Macro-Elmar-M 90 mm f/4

Leica Macro-Elmar-M 90 mm f/4

Now, I already had my two Voigtlander M mount lenses that I was using with the Fuji systems, but they are M mount!

Voigtlander 75mm f/1.8

Voigtlander 75mm f/1.8

First is the Voigtlander Heliar 75mm f/1.8 Lens.  This is an amazing lens that is very fast at f/1.8. The focus is smooth and long and it works very well with M mount extension tubes for true macro work (1:1 image ratio).  I do have 3 of the 10mm extension tubes for it as well as a Canon 500D closeup lens.  For my really small stuff this is my goto lens.  It is a little long but has a very nice clam on lens hood.  While it is NOT a Leica lens it is very close in terms of quality and ease and the f/1.8 aperture gives lovely bokah!

Here then is an example of a 1:1 life-size macro shot with it!

Green Dots...

Green Dots…

Voigtlander 12mm Ultra Wide Hellar

Voigtlander 12mm Ultra Wide Hellar

The last lens that I am going to talk about here is the Voigtlander Ultra Wide-Heliar 12mm f/5.6 Aspherical M Mount lens.  Another heavy all metal lens with remarkable focus and DOF.  Since it is so wide you can almost have a DOF from right in front of the lens out to infinity!  Plus 12mm is really 12mm on the camera!  Given that the camera is both full frame and has a live view you can see the power of using this lens and the ease of composition and focus!

In the example image below please notice the extreme range of the depth of field!

Stormy Seas, down low and dirty... Voigtlander 12mm

Stormy Seas, down low and dirty… Voigtlander 12mm

 

As you can see, all of the system components are extremely high quality and easy to use giving stunning results.  I like to create Long Exposure and Infrared images as well so I thought that I would share some of them with you below.  

M240-BW 59s16ND PI Pier-0148-2014

Pier, Leica M240 60 second exposure

M240 w/ R72 IR Filter

M240 w/ R72 IR Filter

Leica M240 w/ 28mm Elmarit,

Leica M240 w/ 28mm Elmarit

6 Shot HDR, Leica M240

6 Shot HDR, Leica M240

Blue Hour in B&W, Leica M240, 60 second exposure

Blue Hour in B&W, Leica M240, 60 second exposure

M240-1109-60 s PI LE-2014

Low Tide, Leica M240, 45 second exposure

 

I hope that you enjoyed this post.  I will have several more shortly in the future highlighting more of this system as well as some new FILM work!! 

Stay Tuned!

 

Fuji X-E2 Long Exposures and Wild Sunsets!


Every Time I take the X-E2 out I am amazed…

Fire In The Sky, X-E2 w/ 18-55 and 3 stop soft grad ND on the sky.

Fire In The Sky, X-E2 w/ 18-55 and 3 stop soft grad ND on the sky.

We have been having amazingly turbulent weather here in Pawleys Island for the last week or so.  The sky has been moody and dark.  Mornings filled with dense fog and the ocean surf rough…   Perfect for long exposures and wild sunsets

What better excuse then to take the Fuji X-E2 out and capture these wild and moody scenes?  With my full kit of the Lee Seven 5 filters and B+W ND filters in hand I grabbed the X-E2 and the XF 55-200mm F3.5-4.8 Zoom Lens (which has kind of turned into my main carry around lens) and headed out to the beach.  

The X-E2 (in fact, the entire line of Fuji X cameras) is exceptionally adept at long exposure photography.  It generates low noise exposures and has NEVER let me down.  I usually shoot in the 2 to 4 minute range but once in a while will go up to 10 to 15 minutes depending upon the subject.  

In todays post I am shooting between 30 seconds and 4 minutes and one of the sunset images was just a short exposure (1/13).  

The setup for all of the long exposure water images was either a 6 or 10 stop B+W ND filter and the sunset had an added 3 stop soft graduated Lee filter (Seven 5 system).  The sky was just too bright with the wild colors to give anything but a black foreground otherwise! I also used the Fuji RR-90 remote shutter release (but you can also use a mechanical release or a Canon RS60 E3 release).

One of the big benefits of the Fuji X system is the fact that when in the  BULB mode Fuji gives you a count up timer on the LCD screen so that you can easily time your exposure.  This doesn’t sound like much but when you are out in the cold and dark shooting it is a BIG DEAL!  Try doing this with a Nikon 300 and you will understand!

Now, lets talk a little about your exposure metering.  

  • You can (and I sometimes do) use the cameras metering system, but I do find that when metering through the 10 stop ND that it will sometimes confuse the meter.  
  • You can also meter without the ND attached then attach it and adjust the exposure for whatever value the ND is but there is NO guarantee that the filter is actually what it is advertised to be!  
  • What I like to do is to use the Seikonic  758DR spot meter which can factor in the ND filter automatically for you and give you an accurate exposure.  You can also meter through the filter with the 758 to see what the real value of the filter is!.
  • You can also just get close with your first exposure then evaluate your histogram and adjust the exposure as desired.

Which ever way you choose you will be surprised how quickly you can get “on target” by taking just 1 exposure then adjusting! But remember. when we are spot metering either in camera or in an external meter whatever spot you  are metering on will give an exposure for Zone 5 or 18% grey. It is up to you to adjust the exposure up or down to place it into the proper Zone!  What I like to meter on is the sky just above the horizon then adjust it up about 1 stop (move from Zone 5 to Zone 6).  

I ALWAYS have the Long Exposure Noise Reduction turned on in my cameras.  This means that you will double your exposure time.  After you take your image, the camera will close the shutter and take a 2nd one with the same shutter speed.  This is called Dark Frame Noise Reduction and the camera will look for bright pixels in the 2nd shot and subtract them from the first.  This is very worthwhile and will allow you to create much better output images but cut down the amount of time you have to stand there and shoot!

As I said earlier, the mornings have been very foggy so lets start off with several examples of this type of photography.  Of course, you must remember to increase the exposure so that the fog is not a DARK GREY, these have been adjusted from Zone 5 to Zone 6.5 or 1 1/2 stops!

Salt Marsh in the morning fog...

Salt Marsh in the morning fog…

Pawleys Island Pier, Foggy Morning.  X-E2 with 10 stops of ND, 30 seconds.

Pawleys Island Pier, Foggy Morning. X-E2 with 10 stops of ND, 30 seconds.

Foggy Feast, X-E2. Sometimes simple is best!

Foggy Feast, X-E2. Sometimes simple is best!

Ok, lets move on to the evening.  The intent here was simple long exposures to smooth out the surf and remove the surfers (yes I hate surfers as they are always in your shot and don’t care!).  For these type of images you really need to start at 30 seconds and move up.  If the sky is within 3 stops of the foreground then you do not need to add a graduated ND on the sky.

Fire In The Sky,  90 second exposure with 3 stops of grad ND on the sky and 6 stops of ND overall.  X-E2

Fire In The Sky, 90 second exposure with 3 stops of grad ND on the sky and 6 stops of ND overall. X-E2. Notice the cloud movement in the sky and the smooth surf!

X-E2-240s BW LE Pawleys Pier-0255-2013

B&W Pier & Groin, Pawleys Island, SC 240 second exposure, 10 stop ND X-E2

X-E2-240s LE Pawleys Pier-0255-2013

Color version of above image. Notice how the sky and water are close to the same density? 240 seconds.

X-E2-BW LE Pawleys Pier-0246-2013

B&W version of “Fire in the sky”. Yes you should evaluate ALL of your images for B&W.

There is something very soothing about well done long exposures of the ocean.  They really are not difficult to do and the results are worth the investment in time and discomfort (did I mention that it is winter here and I was standing on the beach in the wind?).

As you can see, the Fuji X-E2 excels in all areas of photography.  It has proven itself to be a serious tool to photographers who understand its capabilities and master it functionality!

I hope that you enjoyed this post. Please let me know what you think!

Fuji X-E2 – Amazing Quality!


My Fuji  X-E2 – Just Perfect!

Shrimper Carolyn Ann, Fuji X-E2

Shrimper Carolyn Ann, Fuji X-E2

I have to tell you that I am REALLY a Fuji fan.  I have the following Fuji bodies:

  1. X-Pro 1 – Color
  2. X-Pro 1 – 720nm Infrared Conversion
  3. X-E1 – Color
  4. X100s – My walk around companion!
  5. X-E2 – Color

I also have ALL of the lenses but 2!

I moved to Fuji after a long search for a small light weight camera system after loosing 80% use of both hands and arms.  I went through ALL of the micro 4/3 systems (and even kept 2!).  I sold $40,000 in Canon bodies and L glass and have NEVER looked back!  

In the Fuji, not only have I found perfections but being a range finder styled system it is like going home to mom!

X-E2

X-E2

I have a X100s that I use for most of my walk around work, it is just so tiny and generates amazing images.  So when Fuji announced the X-E2 with the same sensor and with even more upgrades I ordered one from Amazon.  Much to my amazement it shipped a week later!  I have had it in hand now for about 2 weeks and just yesterday took it out to a local fishing port for a bit of creative work.  I love the upgrades and how fast this camera is.  It even passes the X100s in ability.  I originally purchased the X-E1 in order to take advantage of its electronic remote shutter release.  It enables me to hook it up to devices like a lightning trigger and my water drop collision system.  The X-E1 did a great job with these devices and I expect no less with the X-E2 but that is for another day.

X-E2 Top Panel

X-E2 Top Panel

Yesterday I took it out to shoot shrimp boats in North Carolina and have to tell you that the camera just blew me away.  It is such a major upgrade over the X-E1 that I cannot believe that they came from the same company!  The controls are CRISP, the knobs just snap from position to position with no play and they stay where you put them.  The larger LCD is nice but the faster EVF is a sight to behold. I dressed the camera in a RRS L bracket with grip and put on a nice soft release.  Physically except for new buttons and placement the camera is identical to the X-E1.  One MAJOR improvement is the addition of 3 stops of EV adjustment instead of the normal 2 that Fuji has provided in the past.

All in all I am really happy with this upgrade.  I will keep the X-E1 and convert it to 800nm IR in the near future.  There is no sense in letting that viable and great camera go to waste!

Little Scrapper, X-E2, RAW converted in ACR

Little Scrapper, X-E2, RAW converted in ACR

Next I put the camera into the JPG mode and shot color & B&W images in camera.  The results speak for them selves!

Shrimper Donkey X-E2

Shrimper Donkey X-E2

 

Shrimper Donkey, CAMERA B&W  X-E2

Shrimper Donkey, CAMERA B&W X-E2

Carolyn Ann, Color, X-E2

Carolyn Ann, Color, X-E2

Carolyn Ann, In Camera B&W X-E2

Carolyn Ann, In Camera B&W X-E2

Working Shrimper Deck, X-E2

Working Shrimper Deck, X-E2

Working Shrimper Deck In Camera B&W, X-E2

Working Shrimper Deck In Camera B&W, X-E2

This posting was never meant to be a review, rather a statement of its impact upon me with sample images!

Please let me know what you think…

Fuji X100s: Oh Yea…


You know the feeling, and usually need tissues to clean up afterwords!

A little background is in order…

Fuji X100s

Fuji X100s

Fuji X, what can you say except “Yes Please!”.  I am a LONG time X shooter.  I started out several years ago with the Fuji X100 and loved every moment of it.  I likened shooting with it to going home to Mama…  If you know what I mean then you understand.   I did decide that I really desired to have a camera with interchangeable lenses and when the Fuji X Pro 1 came out I jumped on it and all of the FX lenses that have since arrived plus several CV lenses as well.   The X Pro 1 has become may main goto camera system.  I Then purchased the X-E1 due to its electronic shutter release, thus its ability to connect to my lightning trigger and water drop computer system!  The X-E1 only lives for such things…  When I get it out to play with lightning it is like coming home to a doggy after a long day! I then decided to get another X Pro 1 and have it converted to 720nm Infrared.  This system (my 16th IR conversion) is the BEST IR camera that I have ever used and that is a big statement!

Passion Flower Macro, Fuji X100s hand held in bright sunlight.

Passion Flower Macro, Fuji X100s hand held in bright sunlight.

So, along comes the X100s, and I look it over and think on it for months.  I though that gee, what a neat system to add to my bag.   Finally I decided to get one but let me tell you that they are HARD TO FIND!  I found on at a little online camera store in Oregon and had them ship it to me last month.  I am very glad I made  this decision!  To say that the X100S is a world class camera is really short selling its capability!   I find that I carry it EVERYWHERE I go now.  I still use the X Pro 1 for most of my work but the X100s really gives stunning results and the new XTran 2 sensor is amazing.  I love the split image manual focus system and wish the other Fuji cameras offered it as well.

Adams Mill Wheel, Lafayette, IN, Fuji X100s

Adams Mill Wheel, Lafayette, IN, Fuji X100s

The X100s works very well in macro mode and the sharpness, colors and texture are simply breathtaking!  You could not ask more of a walk around camera than the Fuji delivers.  Even without image stabilization the camera is flawless due to its ability to shoot cleanly at high ISOs!

Abstract, Glass Block Floral, Fuji X100s

Abstract, Glass Block Floral, Fuji X100s

I am going to share a few of the images generated so far with this incredible camera and you be the judge!

The Dingy, Fuji X100s

The Dingy, Fuji X100s

Adams Mill, Lafayette IN, Fuji X100s

Adams Mill, Lafayette IN, Fuji X100s

McHargue Mill, Fuji X100s

McHargue Mill, Fuji X100s

Old Truck, Fuji X100s

Old Truck, Fuji X100s

A Face in the trees, Fuji X100s, you have to figure this one out!

A Face in the trees, Fuji X100s, you have to figure this one out!

Ok thats it for today!  What do you think?

Fuji 55-200 mm on a 720nm IR converted X Pro 1


Finally, a LONG X Lens for the Fuji Family!

Pawleys Marsh, Fuji X Pro 1 720nm IR conversion w/ the new 55-200mm lens.

Pawleys Marsh, Fuji X Pro 1 720nm IR conversion w/ the new 55-200mm lens.

Fuji X 55-200mm

Fuji X 55-200mm

Yes, the new Fuji 55-200mm lens arrived for my fuji camera systems!  I am currently shooting with a color X-E1, a color X Pro 1 and a IR converted (720nm) X Pro 1.   I know how well the 55-200 works on the color bodies but what I really needed to know how did it work with the IR system!  Would it give hot spots as so many of the Fuji lenses do?  This post is the report of my findings.  The final verdict is that it works very well and as long as you do not go higher than f/16 there are no hot spots to worry about at any zoom range! To me this is a really big deal.  

So far only the 14mm and 35mm Fuji lenses are usable in infrared. So the addition of another lens really helps.  

I am going to give you some examples of how this lens actually does at both the wide and long ends of the zoom range wide open and closed down so that you can get a feel of the usable Infrared range that you can use.  Next week I will do a posting using the lens for color work only.

Pawleys Marsh, Fuji X Pro 1 720nm IR conversion w/ the new 55-200mm lens.

Pawleys Marsh, Fuji X Pro 1 720nm IR conversion w/ the new 55-200mm lens.

OK, let’s take a look at the good and bad of the 55-200 in IR, the Wide end:

55-200mm @ 55mm, f/23.5 No hot spot

55-200mm @ 55mm, f/23.5 No hot spot

55-200mm @ 55mm, f/11  Small hot spot

55-200mm @ 55mm, f/11 Small hot spot

55-200mm @ 55mm, f/22 Bad hot spot

55-200mm @ 55mm, f/22 Bad hot spot

As you can see as you get to f/11 we start to develop a small hot spot, but nothing that cannot be fixed.  Above f/11 the lens becomes unusable at the wide end.

 

Now, let’s take a look at the long end of the zoom range:

 

55-200mm @ 200mm, f/11 Bad hot spot, NO HOT SPOT

55-200mm @ 200mm, f/11 Bad hot spot, NO HOT SPOT

55-200mm @ 200mm, f/4.8 Bad hot spot, NO HOT SPOT

55-200mm @ 200mm, f/4.8 Bad hot spot, NO HOT SPOT

55-200mm @ 200mm, f/22 Bad hot spot, SMALL HOT SPOT

55-200mm @ 200mm, f/22 Bad hot spot, SMALL HOT SPOT

The difference at the long end of the zoom is amazing and is usable over the entire range of the aperture!  This is great news for us IR shooters.

Pawleys Island Marsh, 200mm B&W Post Processing

Pawleys Island Marsh, 200mm B&W Post Processing

 

There is starting to be a large number of IR photographers out there who are using converted Fuji X Pro 1 camera systems.  There are currently 2 conversion companies out there who can do the conversion.  I HIGHLY recommend the X Pro 1 as an Infrared platform and with the addition of the 55-200mm lens to our shooting arsenal we are way ahead of the game!

 

 

Moody Images in Infrared & Color! Fuji X Pro 1 and X-E1


Grabbing your viewers by the throat and not letting go…

A dark and stormy night

A dark and stormy night, Fuji X Pro 1 w/ 14mm fuji lens at 720nm Infrared.

Images that are dark and moody tend to grab our attention.  It is as though there is something hidden and dark that demands our attention.  We stare at them and analyze the image for a deeper hidden meaning.  This creates emotional impact that allows our viewers to share what we felt as we created the images!

Look for dark, stormy skies, moody clouds, dark trees or water.  Work in Infrared and you will find that you have a much better chance to capture these kinds of images more often than when working in color.  It is still possible to do so in color but you have to work harder at it!

Paradise Island Light, Nassau

Paradise Island Light, Nassau

 

As you can see in the image above, it is moody and draws the viewer into the scene, but it does not have that “dark and stormy” look and feel!  As I stated before, it is much easier to capture these types of image when working in Infrared!

A dark and stormy night

A dark and stormy night

Work in both Faux Color and B&W.  You never really know what you are going to get unless you take the time to post process both ways.  You should even look seriously at the properly white balanced raw image right out of the camera!  Sometime you can get a really stunning image there.

Lady Katheran

Lady Katheran, 720nm Infrared, Fuji X Pro 1 with Fuji 14mm lens.

Here is the same image processed in B&W.

Lady Katheran

Lady Katheran

 

The workflow to getting great images in post processing is to ALWAYS process in the 3 main ways:

  • RAW:  Check how the images looks right out of the camera.  In 720nm and 590nm you can get some stunning images with beautiful bronze skies!
  • Faux Color:  If your camera captures any color data at all (720nm and lower) then you should ALWAYS take the time to process in this mode.
  • B&W: You just done know what you are going to get unless you try!

 

Try adding a lens vignette to your images to darken the corners.  This will give more mood!

Here are some examples of RAW and B&W post processing!

McClellanville Shrimper

McClellanville Shrimper, RAW right out of the camera!

 

McClellanville Shrimper

McClellanville Shrimper, B&W

 

As you can see both versions give stunning results.  The most important thing for you to remember is that to get the best results from all of your images it is necessary to take the time to post process in all three modes.  Do not short change yourself by cutting corners.  Take the time to give each image your best try!  

 

You will be rewarded for you work!

 

Fuji X Pro 1 – 720nm Infrared Faux Color and B&W Post Processing


A Simple Tutorial on Infrared Post Processing…

Murrells Inlet Marsh, X Pro 1 720nm IR Faux Color

Murrells Inlet Marsh, X Pro 1 720nm IR Faux Color

The Fuji X Pro 1 has turned out to be one of the best Infrared camera systems that I have ever used… period!  The only good Fuji lenses for Infrared have proved to be the 35mm f/1.4, the 18mm f/2 and the new 14mm.  The Viogtlander 75mm f/1.8 has also proved to be a STUNNING lens also!  So, the camera has proven its infrared capability, now it is time to discuss in detail the recipe for post processing!  It is all quite simple but there are a few requirements that you must understand in order to follow my workflow with understanding.

Needed:

  • Photoshop CS5 or CS6
  • Nik Filters, Viveza, Define Silver EFX Pro plugins for Photoshop, NOT LIGHTROOM.  (You can now purchase the entire library of Nik filters for $149)
  • Kromography False Color Action which can be downloaded here from the right menu bar under the box menu.  You can simply  click on it to download to your computer then drag it to photoshop to install.
  • A converted Infrared camera system capable of generating enough color data to make Faux Color images.  This means 720nm, 665nm, 630nm and 590nm conversions.
  • The ability and desire to experiment!

As you move your RAW (shoot only RAW for IR because of the ability to shift the white balance easily) onto your computer you should automatically tell yourself that you are going to process each selected image in Faux color and B&W.  Sometimes you will notice that the un processed image looks great also (wonderful bronze tones) and decide to do a version like this as well!

Lets talk about the RAW conversion process a little bit.  Photoshops ACR built in RAW converter will NOT apply the white balance correctly and your images will appear deep red.  For this reason I use Capture One version 7 from Phase One.  It is simply the BEST RAW converter that I have ever used.  You can download a trial version and decide for yourself if what I am telling you is true!

My Initial Editing Steps:

  1. Move images from my camera to my computer with an intelligent download tool that renames them with a meaningful name and create an intelligent directory tree for my RAW Library.  For this I have tested dozens of tools and found that Ingestimatic is the best and lowest cost one out there! You can find them here.
  2. Visually edit the RAW files by deleting the images that are simply no good.  Do not clutter up your computer with these useless files.
  3. Batch process my RAW conversion choices and adjust the exposure, contrast and angles.  Capture One will allow this and place the converted image files into a storage directory for later editing.
  4. Within Photoshop, open  each converted image one at a time for post processing
  5. Run Nik Define 2.0 in its default mode on the image for noise reduction, Save.
  6. Run Nik Viveza and without using any selection points increase the structure around 10% and the contrast about 5%, Save.
  7. Having installed the channel swap action that you downloaded here, run it on your image.  The last thing it will do is to open a Hue/Saturation window with the Master channel selected.  Simply select the CYAN channel  and vary the HUE a little bit to bring the sky to a normal blue rather than a blue/green.  Then select the RED channel and adjust the saturation up to a value you like, and repeat with the YELLOW and MAGENTA channels.  When you are happy with the results click on DONE to move on.  REMEMBER:  This is to only get the colors of the FAUX COLOR IR image into the ball park!  The real adjustment will happen next.
  8. Run Nik Viveza again.  Here is where you will use your control points to slightly adjust the colors and contrasts of various image elements to bring out a stunning, etherial work of art!  LOOK closely at your image, decide what you wish to adjust (Hue, saturation, contrasts and de-saturation). MORE ON THIS LATER!
  9. Run Nik Define one more time.
  10. Flatten the image, crop to taste, correct any imperfections (healing tool and content aware fill).
  11. Save the image with a meaningful name in a planned and thought out master image library.
  12. With the finished Faux Color image still open in Photoshop, now run Nik Silver EFX Pro to do your B&W conversion.  There are several built in recipes in this filter that can be used as a starting point.  My favorites are:
  • High Structure Harsh
  • High Structure Smooth
  • Full Dynamic Range Harsh
  • Full Dynamic Range Smooth
  • Fine Art Process
  • Wet Rocks (once in a while)

Save your image again with a NEW file name that reflects the difference in your master image library tree!

Murrells Inlet Salt Marsh, X Pro 1 720nm IR

Murrells Inlet Salt Marsh, X Pro 1 720nm IR

Remember:  Process ALL IMAGES as both Faux Color and B&W.  You really do not know what you are going to get till you do so.

All of this really is VERY SIMPLE and once you have done it a few times it will become second nature to you.  Soon you will be a post processing Infrared God or Goddess!  Congratulations

No, let’s take a look at the image below.  Notice the areas that I have circled as places where I desire to change the colors, contrasts and saturations (both plus and minus). Also consider that this is a 720nm converted camera and as such has a very limited color range (light pinks and warm tones and blues).

Annotated Faux Color, X Pro 1 720nm IR

Annotated Faux Color, X Pro 1 720nm IR

It is in this area and others like them (similar color values that are the same) that we are going to place control points on and change these values!  If you notice that the areas around them also change a little you can place what we call anchor points which are simply control points with no adjustments to bring those areas back to where you wanted them!

You will find this ENTIRE process from the initial loading into photoshop to finish will just take 4 or 5 minutes or less as you become more practiced!

Here are a few more images for you to consider that were taken on the 720nm Fuji X Pro 1 camera system:

Stormy Seas Faux Color, X Pro 1 720nm IR

Stormy Seas Faux Color, X Pro 1 720nm IR

Stormy Seas B&W, X Pro 1 720nm IR

Stormy Seas B&W, X Pro 1 720nm IR

Sometimes Faux Color images simply do not work, then you still have the great B&W ones to work with!

SC School Bus Boat, X Pro 1 720nm IR

SC School Bus Boat, X Pro 1 720nm IR

SC School Bus Boat, X Pro 1 720nm IR

SC School Bus Boat, X Pro 1 720nm IR

Was this information helpful?  Please let me know one way or the other!

Fuji X Pro 1 720nm IR Conversion


Here it is…

Fuji X Pro 1, Brookgreen Gardens, 720nm B&W processed.  Fuji X 35mm lens.

Fuji X Pro 1, Brookgreen Gardens, 720nm B&W processed. Fuji X 35mm lens.

frontnolensWell, it arrived!  After months of consideration after I got my X-E1 I finally decided to send off the X Pro 1 for  Infrared conversion.  It went to Dan at LDP (maxmax.com) and the cost was $500.00.  YIKES!  yes I said $500.00!  Dan explains that the X Pro 1 is the most difficult conversion that he does!  It required him 1.5 days to do the conversion and lots unsoldering/soldering to get to the sensor.  Still, better than sitting on the shelf or an attempted sale on Ebay, plus  I really like the camera and the hybrid viewfinder is just perfect for IR.

I had to decide between 720nm and 850nm so decided to go for the 720 in order to have a little color ( I really like the bronze tones right out of the camera at 720nm).  The total time for shipping – conversion – shipping was 8 days, door to door.  Very fast!

Importantly, the Fuji X Pro 1 camera White Balances perfectly. For these tests I white balanced on a green shrub in front of my gallery.  The process to do so on the camera is simple and fast!

The scope of THIS post is to talk about the conversion itself and to give you some sample images testing each of my normal Fuji and Voigtlander lens set that I use.

  • Voigtlander Heliar 75mm f/1.8 Lens
  • Voigtlander Ultra Wide-Heliar 12mm f/5.6
  • Fujifilm XF 35mm F1.4 Lens
  • Fujifilm XF 18-55mm F2.8-4.0 Lens Zoom Lens
  • Fujifilm XF 18mm F2.0 Lens
  • Fujifilm XF 60mm F2.4 Macro Lens

My first image out of the camera was with the Fujifilm XF 35mm F1.4 Lens.  It is stunningly sharp with great contrasts and tones without any processing at all! This is simply a perfect IR image right out of the camera.

Fuji X Pro 1, Brookgreen Gardens, 720nm RAW un-processed.  Fuji X 35mm lens.

Fuji X Pro 1, Brookgreen Gardens, 720nm RAW un-processed. Fuji X 35mm lens.

OK, the original hot mirror can tell us a lot about the capability of the Fuji body to take IR with no conversion.  The strength of the internal filter from the X Pro 1 is quite strong!  It is actually 2 filters sandwiched together.  They are very much like the B+W 486 IR blocking filter and the LDP CC1 IR blocking filter back to back.  The 486 is a pink/gold  filter that extends a little further into the visible light spectrum before falling off and allows a little less IR to pass through.  The CC1 filter is wider at the UV end.  The two filters together will pass light to the sensor from about  300nm to 700nm.  You can see this in the image below. This is the same filter arrangement (hot mirror) that we normally see in the Canon DSLR line and on the Panasonic Micro 4/3 camera line.

X Pro 1 Hot Mirror showing both Wide bandpass side (gold tint) and the Lower UV side (Aqua)

X Pro 1 Hot Mirror showing both Wide bandpass side (gold tint) and the Lower UV side (Aqua)

X Pro 1 Hot Mirror showing the Wider bandpass side (gold tint)

X Pro 1 Hot Mirror showing the Wider bandpass side (gold tint)

X Pro 1 Hot Mirror showing the Lower UV side (Aqua) similar to the CC1 filter from LDP

X Pro 1 Hot Mirror showing the Lower UV side (Aqua) similar to the CC1 filter from LDP

If you were to look at the 486 and CC1 filters they are the same general colors and pass band to what we actually see here!  So , what does this all mean to you?  If you decide (and convince Dan) to have a full spectrum conversion done on your X Pro 1, you can convert it back to a normal color camera by stacking both of these filters (B+W486 and the LDP CC1) on the end of your lens.  The full spectrum Infrared conversion is one where the hot mirror (IR blocking filter) is removed from in front of the sensor and replaced with a piece of clear glass.  Then, the camera is programmed to the specific UV or IR band with the addition of the appropriate filter on the end of the lens.

Normally, the hot mirror can bee seen as the colored layer of glass under the lens as shown here where you can now see the 720nm filter installed.

Inside the X Pro 1 showing the 720nm filter.

Inside the X Pro 1 showing the 720nm filter.

Lenses that Work/Don’t Work with the X Pro 1 720nm IR conversion…

Lens Hot Spots

As you may know (or guessed), not all lenses work well in the Infrared spectrum.  This is due to many things, but most commonly, the coatings on the lens elements and the coatings on the internal lens barrel and how they reflect IR light energy.  The common failure then is in the form of HOT SPOTS in the center of the image captured by the camera.  These are always dead center in the middle of the image and present as large round white areas.  Sometimes, they can be overcome by using a wider aperture, but not always…

Lets talk about the lenses that I tested that work (or in 1 case mostly work)…

Fujifilm XF 35mm F1.4 Len:

Fuji X 35mm Lens

Fuji X 35mm Lens

WOW, what can I say?  This lens works perfectly in the 720nm spectrum at all apertures!  The camera auto focuses perfectly and fast, the images are sharp and there are no hot spots at any aperture!  Lets take a look.  This first image is raw out of the camera.  I have done not post processing for B&W or Faux Color but there is enough color in the 720nm spectrum to have some interesting Faux Color results.  These types of images will be covered in another post next week and we will spend a lot of time and effort teaching and going through each step in the recipe used to create them in Photoshop CS6 and the Nik filter set.

Fuji X Pro 1, Brookgreen Gardens, 720nm RAW un-processed.  Fuji X 35mm lens.

Fuji X Pro 1, Brookgreen Gardens, 720nm RAW un-processed. Fuji X 35mm lens f/8

Next, is the same image post processed using CS6 and Nik’s Silver EFX Pro for B&W…

Fuji X Pro 1, Brookgreen Gardens, 720nm B&W processed.  Fuji X 35mm lens.

Fuji X Pro 1, Brookgreen Gardens, 720nm B&W processed. Fuji X 35mm lens f/8

Voigtlander Heliar 75mm f/1.8 Lens:

vt7518bThis lens from Voigtlander is one of the sharpest, easy to use lenses that I own.  The fit and finish on this lens is something to behold.  The lens has an included clamp on lens hood that works very well.  The focusing is so smooth that it is scary… It is a PERFECT match for the Fuji X system (X Pro 1 and the X-E1) and works just as well here in Infrared!  I was very happy to discover this in my tests at 720nm!  There are no hot spots at any aperture.  It takes Take a look:

Voigtlander Heliar 75mm f/1.8 Lens at f/11.  Raw

Voigtlander Heliar 75mm f/1.8 Lens at f/11. Raw (notice the nice bronze coloring)

Voigtlander Heliar 75mm f/1.8 Lens, f/8 Faux Color Post Processing

Voigtlander Heliar 75mm f/1.8 Lens, f/8 Faux Color Post Processing

Voigtlander Heliar 75mm f/1.8 Lens, f/8 B&W Post Processing

Voigtlander Heliar 75mm f/1.8 Lens, f/8 B&W Post Processing

Fujifilm XF 18mm F2.0 Lens:

Fuji X 18mm lens.

Fuji X 18mm lens.

This lens works well as long as you do not go beyond f/8.  Past that it generates very discinct hot spot in the center of the image.  While this can be overcome in post processing  with Nik’s Viveza, it is still slightly disappointing…  Still, when used at f/8 or wider the lens generates pleasing sharp images that make it worthwhile to carry in your camera bag!  Here are the RAW test samples for you to consider.

Fujifilm XF 18mm F2.0 Lens at f/2

Fujifilm XF 18mm F2.0 Lens at f/2

Fujifilm XF 18mm F2.0 Lens at f/4

Fujifilm XF 18mm F2.0 Lens at f/4

Fujifilm XF 18mm F2.0 Lens at f/5.6

Fujifilm XF 18mm F2.0 Lens at f/5.6

Fujifilm XF 18mm F2.0 Lens at f/8

Fujifilm XF 18mm F2.0 Lens at f/8

Fujifilm XF 18mm F2.0 Lens at f/11

Fujifilm XF 18mm F2.0 Lens at f/11

Voigtlander Ultra Wide-Heliar 12mm f/5.6

Voitlander 12mm

Voitlander 12mm

Another great lens from Voigtlander.  This one has a built in lens hood and while it will take screw in filters they need to be wide angle versions.  It also has that super smooth focusing feel but since it is so ultra wide at 12mm you can focus it pretty much at infinity and it will always be in focus.  I love this lens on the X Pro 1 and X-E1.  For 720nm Infrared, it works great until you hit f/22 then it gives a faint hot spot.  This is just fine with me as I rarely go beyond f/11 or f/16.

Take a look at the samples:

Voitlander

Voigtlander Ultra Wide-Heliar 12mm f/5.6 at f/8 RAW

Voigtlander Ultra Wide-Heliar 12mm f/5.6 at f/22 RAW with hot spot

Voigtlander Ultra Wide-Heliar 12mm f/5.6 at f/22 RAW with hot spot

Fujifilm XF 18-55mm F2.8-4.0 Lens Zoom Lens:

Fuji 18-55

Fuji 18-55

This lens is such a disappointment to me…  It is without a doubt my favorite walk around Fuji lens on the X-E1 camera. I hardly ever take it off.   Sharp and clear with great contrast.  That being said it is all but USELESS for Infrared!  There is a major hot spot problem at ALL focal lengths at ANY aperture past f/4.  At f/4 it did take nice images but as you understand, useless for landscapes.   Bummer…..  I am beyond disappointed over this one.

Fujifilm XF 60mm F2.4 Macro Lens:

Fuji 60mm

Fuji 60mm

I am going to initially tell you to simply forget this lens for Infrared.  It has a seriously bad hot spot at all apertures.  I will also share with you that I might actually have a bad copy of it.  It gives a terrible hot spot on my X-E1 when shooting in color as well, especially when using a flash.  I think that I am going to send it back to Fuji for repair and see what they think.  Depending upon that I might re-evaluate it for Infrared later on!

Ok this is all for the initial post.  

The next post will focus on post procseeing and what can be acheived artistically with this new Infrared Fuji X Pro 1!

Please let me know what you think!

Wabi/Sabi: Exploring decay in man made objects


All things Old are Beautiful again..

This morning at 9:30 at Georgetown, SC. I decided to get out my cameras and shoot some Shrimp Boat images before I had to open a Co-Op gallery that I am a partial owner of.  The Shrimp  Boats are a subject that are very dear to me and I visit them every chance that I have.

They are for the most part all falling into decay.  The market for local salt water shrimp is almost not enough to support the boats.  With the import of fresh water farm shrimp the local fisherman are being forced out of business and the result is the condition of the boat and companies… A very sad state of affairs.

The Boat Graveyard and the 3 Wheel Houses...

The Boat Graveyard and the 3 Wheel Houses…

The image above illustrates the wabi-sabi concept:  There is beauty in decay  It sounds very counter to the way we think as artists, but with a little thought I think that you will be able to agree with the concept.

Wabi-Sabi

The Japanese concept of Wabi-Sabi, as described in Brainpickings, “connotes a way of living that finds beauty in imperfection and accepts the natural cycle of growth and decay.”

Characteristics of the wabi-sabi aesthetic include asymmetry, asperity (roughness or irregularity), simplicity, economy, austerity, modesty, intimacy and appreciation of the ingenuous integrity of natural objects and processes.
From an engineering or design point of view, “wabi” may be interpreted as the imperfect quality of any object, due to inevitable limitations in design and construction/manufacture especially with respect to unpredictable or changing usage conditions; then “sabi” could be interpreted as the aspect of imperfect reliability, or limited mortality of any object, hence the etymological connection with the Japanese word sabi, to rust.[citation needed]The Japanese kanji characters:

 


(sabi, meaning rust)

and


(sabi, as above)

are different, as are their applied meanings, yet the original word (pre-kanji, yamato-kotoba) is believed to be one and the same.
“Wabi-sabi is the most conspicuous and characteristic feature of traditional Japanese beauty and it occupies roughly the same position in the Japanese pantheon of aesthetic values as do the Greek ideals of beauty and perfection in the West.”  “if an object or expression can bring about, within us, a sense of serene melancholy and a spiritual longing, then that object could be said to be wabi-sabi.” “[Wabi-sabi] nurtures all that is authentic by acknowledging three simple realities: nothing lasts, nothing is finished, and nothing is perfect.”
The words wabi and sabi do not translate easily. Wabi originally referred to the loneliness of living in nature, remote from society; sabi meant “chill”, “lean” or “withered”. Around the 14th century these meanings began to change, taking on more positive connotations.[1] Wabi now connotes rustic simplicity, freshness or quietness, and can be applied to both natural and human-made objects, or understated elegance. It can also refer to quirks and anomalies arising from the process of construction, which add uniqueness and elegance to the object. Sabi is beauty or serenity that comes with age, when the life of the object and its impermanence are evidenced in its patina and wear, or in any visible repairs.

For me and what I consider to be “Fine Art Photography”, the concept of Wabi-Sabi fits like a glove in regards to the shrimp fleets.  I watch them over the span of time, capturing them again and again.  The one thing that stands out above all is the fact that they like everything else will fall into decay… both physically and financially, but faster.

The 3 Wheel Houses in B&W. Stepping back into an older time of photography, fitting don't you think?

The 3 Wheel Houses in B&W. Stepping back into an older time of photography, fitting don’t you think?

I am going to dedicate a photography project to this concept.  I would think that it will take me several years to finish or perhaps unto my death which in a strange twist of logic fits into the project/concept quite well.

So I hope that you enjoy these images and that you intellectually chew on the concept of Wabi-Sabi and to how it will fit into your own artistic visions….

Normally, detailed closeups would be better suited for wabi/sabi studies, but look at these following 2 images and notice how the rust and corrosion feed into the concept.  Do you see the detail in the flat areas of the boat and how it is rolling and pitted?  These imperfections take on an artistic perfection on their own!

Stormy Seas, Georgetown, SC.

Stormy Seas, Georgetown, SC.

B&W, stepping back into an "older" time and place.

B&W, stepping back into an “older” time and place.

The Wheel House Door

The Wheel House Door

The Working Boat, 630nm Infrared

The Working Boat, 630nm Infrared

The Battered Bow...

The Battered Bow…

I hope that you enjoyed the image and the concept…

A day in Georgetown with the Fuji X-E1


Travel and the Fuji X Series, a match made in Heaven!

1 camera, 3 lenses and a good filter system and we are good to go!

Voigtlander Heliar 75mm f/1.8 Lens

Voigtlander Heliar 75mm f/1.8

I spent last Sunday in Georgetown, SC.  I had a gallery change out in a gallery that I am a member of (Co-Op).  The change out only took about an hour so I decided to take the rest of the day to scout new locations and just shoot!

There are several places there that I love to visit.  As you drive North on Front Street out of the Down Town area you start passing several side streets on the right.  Each of these leads to a marina with several Shrimp Boats (and in 1 case many!).  I like walking around the docks and working each group of boats then moving in closer and doing detail images. These vessels are not long to be with us so if you have the chance to visit and photograph them you should youmake it a priority to do so!

The 3 Shrimpers!

The 3 Shrimpers!

The choice between Color and B&W is a tough one for most photographers.  For me, I like B&W much better but I will porcess both for each and every image that I take.  So I will have the choice as to what I eventually use readily on hand!

Sun in the rigging...

Sun in the rigging…

I do not normally shoot intentional lens flair but for this image I composed the image with it in mind! This generated such a perfect series of light beams that they were visible in front of the boats cabin door! Again, the choice between Color and B&W was a no brainer for me!

The 3 Bows...

The 3 Bows…

Voigtlander Heliar Ultra Wide-Angle 12mm f/5.6 Lens

Voigtlander Heliar Ultra Wide-Angle 12mm f/5.6 Lens

In the end I will still offer you a Color Shrimp Boat selection.  These boats are old, and full of color!  Rust, bright paints, bottom paint, lines and life rings can make for a bright and eye catching display if you present it properly with a composition that is pleasing.

At the very end of Front Street you will find several parks along the edge of Winyah Bay with pilings in the fore ground which make idle compositions for long exposures.  Plus there is a boat launch that you should walk out on and look north across a long line of pilings!

Lee Seven5 Filter System

Lee Seven5 Filter System

What fun I had!  I found some really great Shrimp Boat compositions and did some long exposures with the Fuji and the Voigtlander Heliar 75mm f/1.8 Lens with the new Lee Seven 5 filter system! Consider, that the Lee system is a bulky but light system (look at the image to the left), when you add in the camera and lens the entire combination can become bulky and heavy making it difficult to use.  I also used the Voigtlander Ultra Wide-Heliar 12mm f/5.6 Aspherical and the Fuji M to X adapter for several of these Shrimp  Boat images.

This is the main reason that I switched to the Fuji X system (aside from the fact that it generates stunning images!

Ok, as the day go away from me I went further North to the parks looking at long exposure locations for sunset.  After looking at all of the locations there I decided to set up at the boat launch and setup looking to the North across the pilings there.  The sun was setting fast and I setup using the 75mm f/1.8  and the Lee Seven 5 system with a solid 3 stop ND and a soft Graduated ND to darken the sky. The result was this 90 second exposure:

Boat Launch Pilings, Deep Twilight

Boat Launch Pilings, Deep Twilight, 90 second exposure

With the sun totally gone and deep into twilight, I simply turned the camera 90 degrees to the right and looked at the industrial complex across the bay with great columns of smoke spewing into the sky!  I removed the 3 stop solid ND and kept the soft Graduated ND in place to further darken the sky. So the resulting image was a 240 second exposure and full of color, smooth water and blowing smoke:

240 second exposure, deep twilight.

240 second exposure, deep twilight.

Do you see how a light weight high quality camera/lens system like the Fuji works to our benefit when traveling and needing the ability to shoot in all conditions?  With the X-E1 system there is no limit to my shooting styles including Lightning, Water Drops and Long Exposures.

Please let me know what you think!

Getting Better Long Exposures: Fuji X-E1 & Sekonic L758DR, A Detailed Tutorial


All things are fair in Love and War…

and we need every advantage we can get as photographers in long exposure!

Long Exposure Sunrise Abstract

Long Exposure Twilight Abstract with a 3 stop graduated soft ND filter to darken the sky.

The long exposure game, is one of compromises: fighting too little light, balancing the moon and its reflections, cameras and lenses, camera meter or external meter! Long exposures are one of the more difficult photographic styles and one that takes experience and patience to master.  As such, the photographer needs every helpful trick that they can gather into their bag of tricks in order to generate, stunning etherial images!

Equipment tailored to Long Exposures that I like and use:

  • Fuji X-E1 Camera.  Provides both electronic and mechanical remote shutter releasees, Bulb mode with back panel displayed timer, ultra clean low noise long exposure images!
  • Olympus OMD with the Panasonic 14-140mm lens.  Great built in long exposure modes like the Live View Bulb mode where the camera will display an updating image on the LCD panel as the exposure continues to be made.  This gives you a very clear indication of the exposure as it is happening and is like watching a Polaroid develop!  The ISO noise performance is not as good as the Fuji but is indeed acceptable.  I use both camera systems but like the Fuji better!
  • Fuji XF 18-55mm zoom lens.  Sharp images with good range of wide angle to standard lengths!  58mm filter size. ZERO lens flair.
  • Voigtlander Heliar 75mm f/1.8 Lens. Coupled with the Fuji M to X adapter provides an easy to focus sharp image with a 52mm  filter with a f/1.8 to f/16 aperture.
  • Voigtlander Ultra Wide-Heliar 12mm f/5.6 Aspherical M Mount Lens. Ultra wide super sharp and a depth of field that just goes on forever!  This lens takes a 67mm filter and can only take advantage of screw on filters due to its built lens hood.
  • Gitzo & Feisol Carbon Fibre Tripods with Really Right Stuff BH55 Ball head. This is a light weight combination gives solid steady support with ZERO camera creep from the ball head!
  • B+W ND filters, 3, 6 & 10 Stop.  These filters use Schott glass and are the best ND filters out there.  I much prefer fixed ND filters to variable because I KNOW what the filter factor always is for exposure settings and lack of guess work.
  • Lee Seven 5 Micro Filter System.  Simply stated, the Lee series of rectangular ND filters is the best in the world.  The Seven 5 system was designed for small camera systems like the range finder styled Fuji X-E1 camera system.  This provides the ability to use a set ND in the 2, 3 and 10 stop range in conjunction with a graduated ND filter in Hard or Soft edges from 1, 2 & 3 stop ranges to darken the sky for further control!  While expensive (what isn’t?) this system gives the photographer the best opportunity to capture PERFECT long exposures in any situation!
  • Sekonic L758DR Light Meter.  This is my main tool aside from the camera, for long exposures!  It is a 1 degree spot meter that can be calibrated to your camera and gives PERFECT exposures while accounting for what ever ND filter you have installed.  It gives you a choice of where you meter in the scene and then using the ZONE SYSTEM allows you to shift your exposure up or down in order to give you the image you envision!  For me, this is my MUST HAVE MAIN TOOL for exposure control.  It goes way beyond the capability of your in camera metering system.

Must Have Thought Processes to Master Long Exposure Photography

  • You must MASTER the physics of exposure!  But relax, this can be accomplished in about 1/2 hour then a few outing to experiment with your new knowledge set!
  • You must MASTER the ZONE SYSTEM of exposure control. This is simply a different way at looking at exposure where you divide what the camera can see and record into 10 distinct zones from black to white with each zone assigned to a specific stop that can be adjusted with either shutter speed or aperture.  This will make your in head exposure calculations easy and automatic.  When you couple this with the fact that ALL metering systems force the measurement area into the 18% gray area (ZONE 5) then you can see how easy it is to force the camera exposure to give you the envisioned image the first time!  There are several books and videos on Amazon that will be good to read. Here is a nice book on the overall zone system, and here is one dealing with it for digital systems.
  • The ability do look at a scene before you ever pick up a camera and envision what you want to capture and how you want it to look!  Remember, the camera is a tool, you master your tool and make it create your envisioned image!
  • The drive to suffer through long hours in the dark and cold just to capture 3 or 4 images!  Know this, the exposure, say 15 minutes is only 1/2 the time needed by the camera to save the image onto your memory card.  The camera will run a noise reduction cycle the same length as the exposure before you can move onto the next exposure.  So if you take a 15 minute shot your camera will be tied up for 30 minutes!  This then, is why you need to get the exposure dead on each and every time!  You only can get so many shots when it takes 1/2 hour for each 15 minute shot.
  • The ability to post process (I use Photoshop CS6 and the Nik Software filter set) in both Color and B&W.
The Pawleys Island Pier, Fuji X-E1 with the 18-55mm lens, 3 stop Lee Graduated ND for the sky and a 3 stop ND overall.

The Pawleys Island Pier, Fuji X-E1 with the 18-55mm lens, 3 stop Lee Graduated ND for the sky and a 3 stop ND overall.

So let’s put all of this together in a process or recipe (if you will) that will lead us to success in the Long Exposure game (NOT Star Trails which is a slightly different game!

My favorite time to setup and start taking my long exposures is from 1/2 hour before sunset to about 2 hours after (depending upon the moon).

I will usually go to the beach and look for something in the foreground like some rocks, groin, dead trees, pilings or a pier.

680 second exposure, Pawleys Island Pier and Groin.  Fuji X-E1, at the end of twilight going into full darkness

680 second exposure, Pawleys Island Pier and Groin. Fuji X-E1, at the end of twilight going into full darkness


The ocean state only make a difference in that if the waves are large then you will need a much longer exposure to flatten them out. So many of the long exposures you see with bands of dark and light in the ocean are caused by your exposure being too short to totally flatten the surface.  A single band of white in the foreground is caused by the surf crashing down onto the sand and that can also be overcome by extending your exposure past 10 minutes!

  • 1/2 hour prior to sunset: For this time period you will need a 6 to 10 stop ND filter (depending upon the light in the sky) to darken the scene enough to slow the water and clouds down.  By adding a graduated ND filter to cover the sky you can further even the scene and give a moody sky especially if there are colds!

    1/2 hour before Sunset, Fuji X-E1 250 seconds with 10 stop ND, extremely cloudy!

    1/2 hour before Sunset, Fuji X-E1 250 seconds with 10 stop ND, extremely cloudy!

  • Sunset/Sunrise:  keeping the same filters in place you are now getting exposures in the 6 minute range.  The water is very smooth and milky.  Start show up in the sky and leave curved trails. Sky colors explode and you will get your best color saturation.

    Sunrise, Outer Banks Fishing Pier, Fuji X-Pro 156 seconds, 3 stop ND.

    Sunrise, Outer Banks Fishing Pier, Fuji X-Pro 156 seconds, 3 stop ND.

  • Twilight:  The sun is down, and the sky is turning dark blue. The stars are bright.  It is time to remove the fixed ND filter but perhaps leave on the graduated ND for the sky.  Your exposure times should drop down into the 1 to 3 minute range providing the moon is not full.  At this point a full moon will provide way too much light and turn the sky white.  A 1/4 moon will give nice even lighting and a much better image.

    The 2-fer, The pier & groin, Pawleys Island Twilight

    The 2-fer, The pier & groin, Pawleys Island Twilight

  • The DARK:  Ok, there is no light in the sky other than the moon, stars and pollution. Sometimes though, the light pollution from buildings and towns can add a dramatic component to your images like the one shown below!  This is the time now when you are looking at exposure times from 4 to 20 minutes depending upon the light conditions.  I will now remove all filters unless there is a very bright moon.
Full Dark!  Fuji X-E1 with a 3 stop Lee graduated ND filter  covering the sky to the horizon. 125 seconds at f/11. Light pollution from the hotels and pier behind me.

Full Dark! Fuji X-E1 with a 3 stop Lee graduated ND filter covering the sky to the horizon. 125 seconds at f/11. Light pollution from the hotels and pier behind me.

Of all of the times in the list above I like the Sunset and Twilight times for my best images!

Metering:

Metering of all the aspects of long exposures is your most difficult hurdle.  The in camera meters when set to spot, are indeed capable, but they are not totally accurate and more importantly, they are large spots, in the 5 degree  range rather than the 1 degree of the hand held meters.  Yes you can use them but be prepared to have to adjust your exposure for a second shot… And this is WHILE the ambient light is rapidly changing as the sun continues to set!

Time for a talk on exposure..

We have the 3 basic exposure settings to work with, ISO (which should be set on your cameras lowest or native setting), APERTURE, which for a sharp image with proper DOF should be set for f/8 to f/16 and Shutter speed which should be set at least at 30 seconds and around 2 minutes for good smoothing of the ocean surface and clouds. You will lock the ISO and APERTURE while looking for a good shutter value to be generated by the metering system.  So as you can see, you can set the camera in Aperture Priority mode to shoot here.  I find though that I like full manual mode better.

Here is what you can expect for various shutter speeds:

  1. 30 seconds, start to have good smoothing of the waves with some of the bigger waves still showing above the water surface.  Alternating dark and light bands in the waters surface.
  2. 60 seconds, a more profound smoothing in the waters surface, more even lighting and coloring, still with some bands…
  3. 120 seconds, total smoothing of the water, no banding and great even coloring of the water.
  4. 480 seconds and up, totally smooth water, even color and shading, almost a glass like surface of with milk.  Very pleasing and soothing…

Keeping the Depth Of Field (DOF) in mind, you can see that the shutter speeds are the key to your images.

Now, how best to determine your exposure?

Time for the meat of this post, metering…

As discussed earlier, the internal meter of digital camera systems is not the best meter out there.  In the spot mode they provide a very large spot (5 degrees) when what we really need is a 1 degree spot.  The smaller spot gives us a more accurate and isolated reading which can be vital in determining the overall exposure.  If you use this in conjunction with the ZONE system developed by Ansel Adams then we have a really powerful system.  Lets take a look.

Zones

Zones

The ZONE system is very simple.  It divided your total exposure into 10 equal parts or zones.  Each zone is a specific “stop” and the center (zone 5) where where ALL METERS place the exposure of anything it sees!

As you can see from the chart on the left of the zones, they start at black for zone 0 and move to white at zone 10.  Zone 5 being the 18% gray is what the meter sees and will adjust the exposure of the spot metered to be there in the 18% gray!  This explains why so  many photographers snow images come out as gray!  Knowing that the meter will automatically place the measured spot into the gray area it is a simple matter for the photographer to mentally move the zone up or down in adjustment in order to place the metered spot into the desired zone!

It is easy to understand and implement!

Looking at Zones

Looking at Zones

  1. So, let’s take a look at a sample image, not as a photograph but what we would see with our eyes. If you were to look at the top meter spot in the sky you would see that it falls into zone 7!  But if we were to meter on this spot, the meter/camera would move it to zone 5 which would be just too dark for the overall picture.  The fix is to take the meter reading then mentally move it into zone 7 by adding 2 stops of exposure.  Here is what the meter system suggested for this measurement:  Spot reading on the overcast sky at f/8, ISO 200 gives a shutter speed of 15 seconds, but we KNOW that it is in zone 5.  We simply add 2 stops to place it into zone 7 by increasing exposure to 60 seconds, or 2 stops.  The sky now brightens into zone 7.
  2. Lets do another and meter on the horizon water.  The spot meter reads this as f/8, ISO 200 and the shutter speed of 60 seconds which it sees in zone 5 and since it is actually in zone 5 we can just go with the suggested exposure!

See?  Easy to do.

So, hopefully the camera meter has a small enough spot to read these small areas and give you an accurate exposure suggestion.  But, what happens when you add a 3, 6 or 10 stop ND filter into the mix?  Well 3 stops will not affect the meter, but 6 and 10 will destroy any accuracy and your exposures will be all over the place.  We just cannot have that happens so this is where a hand held spot meter comes into play!

There are 3 things that you must keep in mind when you are thinking about hand held meters.

  1. They are more accurate than camera meters
  2. They have a true 1 degree spot
  3. They allow you to tell them of any ND filters installed on the camera and automatically compensate for them!

I suggest 2 meters from Sekonic for you to consider, the L508 and L758DR.

  • The 508 has an adjustable spot from 1 to 5 degrees and allows you to account for an installed ND filter .  It is no longer produced but readily available for around $300.00.
  • The L758DR has a fixed 1 degree spot, allows for filter compensation up to 10 stops and can be calibrated to your camera.  It also has a viewfinder display and much greater functionality than the 508.  It can be found for about $650.oo.

Sekonic L758DR Spot Meter

Sekonic L758DR Spot Meter

Here is the L758DR which is what I am using and will show in the following examples. The meter has 2 modes of measuring light, the lumasphere and the spot which is simply an eye piece that you look thru and shows a target you place on the area of the scene you wish to measure!

How to use the Sekonic L758DR Spot Meter:

  1. You need to use the custom functions on the meter to set WHOLE stops for the shutter speed.  This will simplify you life in a major way!
  2. Set the meter MODE to SPOT with the APERTURE selected which enables you to lock in a specific Aperture.  This will have the F surrounded by a BOX. Then when you take a measurement, the Shutter Speed will be displayed for Zone 5.
  3. You need to set your natural ISO into the meter.  Press and hold the ISO 1 button and simply turn the round dial to select that ISO you desire to work in!
  4. Decide on which ND filter (if any) you are going to use for this shot!  Then hold down BOTH the ISO 1 and ISO 1 buttons while turning the round dial to select between +/- 0 to 9.9 stops.
  5. Then you just press the measure button under  the spot viewfinder  to measure your selected area of the scene and adjust the Zone up or down as in the zone examples above!  It is that simple!

Set Mode to SPOT

Set SPOT Mode

Set SPOT Mode

Setting the ISO

ISO Set

ISO Set

Setting the Filter compensation

Filter Compensation

Filter Compensation

Taking the Measurement

Meter Viewfinder showing the target and measured values. The meter button is just below this.

Meter Viewfinder showing the target and measured values. The meter button is just below this.

That is all of the necessary steps to use this meter. It really is very easy! There are several videos on the Sekonic web site as well as on Utube.  

Understanding ND Filters:

The B+W, well most others as well can be tough to understand!  Here is a break down of all of the filters and how to read the codes!

B+W ND INFO

B+W ND INFO

Knowing how to read the filters is important but understanding how to use them even more so.  Lucky for us in long exposures we are interested in the shutter speed.  If we get a shutter speed of 1/15 second with no ND installed we know that it is simply too fast to slow the water down!  So we realize that a ND filter is needed.

Standard ND Filters effect on a 1/15 second shutter speed with a fixed ISO and Aperture:

  • No filter            1/15 second
  • 1 Stop                1/8 second
  • 2 Stops             1/4 second
  • 3 Stops             1/2 second
  • 6 stops             4 seconds
  • 1o Stops           1 minute

These are the standard ND filters from B+W, other companies offer the same and other values.  Lee offers in the Seven 5 system, 1, 2, 3 and 10 stop values as well.

So now, you take your meter reading and look at the suggested shutter speed, install a ND filter and then tell the meter which one chosen and it will give you the corrected shutter speed. Remember, all camera meters will fail at 6 stops on!

Graduated ND Filters:

Lee Hard Graduated ND

Lee Hard Graduated ND

Lee Soft Graduated ND

Lee Soft Graduated ND

These are filters from Lee (some round ones from B+W but they divide directly in the center) that come in 1, 2 and 3 stops.  They are either a hard transition between dark and clear or a soft transition covering a larger area of the filter.  I use these filters to darken part of the image, usually the sky.  If you have a firmly visible seperation between the sky and water at the horizon, you can use a hard graduated filter.  Otherwise you will use the soft which is the normally used choice. Take a look at the images here of both and you can see their usefulness.

Deciding on which value to choose, 1, 2 or 3 stops is simple.  You simply use your meter to spot read the sky and then again the ocean.  Look at the difference between the shutter speeds given with a fixed Aperture and ISO.  The difference will tell you how much graduated ND you need to use.

These filters are also handy for other landscapes as well.  How often are we plagued with waterfalls or landscapes where the sky is just too bright?  Apply the same metering difference to those images as well for a vastly improved result.

Last minute considerations as you venture out to practice your Long Exposures!

  1. Keep your lens clean, salt spray can and will sneak up on you and spit all over your glass!
  2. Push your tripod legs slightly into the sand for increased stability.
  3. Keep aware of the surf!  Do not let it over take your tripod. it will cause your camera to drop a little lower and ruin a shot.
  4. Keep the Horizon STRAIGHT!!  If you have an in camera level use it!  If not, purchase and attach an external level onto your flash hot shoe and use it!
  5. Use your in camera long exposure noise reduction setting in the custom settings!  This will not only reduce noise in camera (yes photoshop can do this) but it will remove all sensor hot pixels and dark pixels which photoshop will NOT DO!  I understand that your exposure time will double due to this but isn’t the final image quality worth the extra wait?
  6. Take a light weight chair.
  7. Have a light to see the camera setups or a ultra bright light to lighten a subject for focus!  I like a lighted hat for this and a Sure Fire LED 500 Lumen light to reach out and light a subject for focus (not to mention light painting!)
  8. Gloves?
  9. Warm Coat?
480 second exposure, Fuji X-E1 Late Twilight! Metering of the cloud base just above the horizon then moved to Zone 7!

480 second exposure, Fuji X-E1 Late Twilight! Metering of the cloud base just above the horizon then moved to Zone 7!

OK all done, I hope that you both enjoyed and learned from this post!  Please let me know.

Twilights Bitter End…


No Words, just images…

 

The Bigger End, Olympus OMD.

The Bigger End, Olympus OMD.

 

The 2-fer, The pier & groin, Pawleys Island Twilight

The 2-fer, The pier & groin, Pawleys Island Twilight

The 2-fer, The pier & groin, Pawleys Island Twilight

The B&W 2-fer, The pier & groin, Pawleys Island Twilight

 

Olympus OMD EM5 and Ultra Long Exposures!


And now for something different!

Pawleys Pier, Twilight. 847 Second Exposure, Olympus OMD with the 12-60mm lens.  Iso 200, f/22

Pawleys Pier, Twilight. 847 Second Exposure, Olympus OMD with the 12-60mm lens. Iso 200, f/22

I know, most of my recent posts have been about the new Fuji X-E1, but tonight I decided to take out the OMD and test it out for ultra long exposures.  I have the OMD as a high speed replacement for my Canon DSLR (currently a 7D) in order to reduce weight and ease of use.  Overall the camera performs very well and generates impressive, sharp images up into very high ISO’s! But a friend recently purchased one to use and wanted to do some long exposures.  So I got mine out, looked over the in camera options and was VERY surprised to learn of several very nice long exposure benefits built into this camera!

  • Live View Bulb Mode: This is an amazing feature (are you listening Fuji?)!  With this mode, you must first set the max shutter speed length, then the update times.  What this means is that you can set an exact exposure or some ultra long one.  Then you can let the camera time the shutter or you can use a remote shutter release to start and stop the exposure as one would normally see in a BULB mode.  What the added value here is that the camera turns on the live view screen and updates the LCD panel with the  image displayed with the CURRENT exposure during the BULB exposure!  The timing of the update is the value you set when you set the update times!  You can have up to 24 updates.  In simple terms, this allows you to SEE the image developing on the LCD panel during the exposure!  Way cool and very valuable.  The only change I could wish for is for the histogram to also be displayed for each updated image.  A remote shutter release with a lock is required for this mode.
  • Live View Timer Mode:  This works just the same as the BULB mode except that you press the shutter release once to start and once to end!  If you forget your remote shutter release you can still get the picture!
  • Onscreen Level:  This allows you to get the horizon straight!  Simple thing but important for any image and critical for long exposures.
  • Programmable Function Keys:  Makes long exposures in the dark easier but setting Function Button 1 to Manual Focus.  This means that you can switch back and forth from manual to auto focus modes without having to go through the menu system.
  • On Screen Focus Point Touch Select: With the camera in auto focus mode you can touch the area of the image that you wish to focus on and then do a focus.  By using this in conjunction with the function key as described above you can easily change your focus. In the dark, this makes it very easy to select a point of light on a long pier and have the camera focus, then hit the function key to select the manual focus mode to lock it in! If there is not a point of light, having an ULTRA BRIGHT flashlight and lighting something in the scene to focus on works well also!

The OMD worked tonight flawlessly for these long exposures!  The longest was over 14 minutes and generated a clean low noise image!  But most importantly, I was able to take this image with NO metering at all. I simply chose the Live View Bulb mode and watched the image develop on the LCD screen during the exposure and when it was where I liked it I simply stopped the exposure!  Understand, this is not exact as the LCD does not give an exact true image display, but it was always within 1 stop!

Here is a B&W version as well but I think you will agree that this entire outing was easy and fun and gave superb results!

The B&W version processed in Nik's Silver EFX.

The B&W version processed in Nik’s Silver EFX.

Death by neglect….


Lila Lee, in the boat grave yard…

There is something about Shrimpers… I cannot get enough of them and find myself visiting them again and again.  I love the dilapidated nature of them and even though they are in such rough condition they seem to venture out into the deep time after time.  Perhaps they are a reflection of the men who sail them, rough hewn, salty men, eking out a living from the sea.  Regardless, they are things of photographic beauty and deserve to be documented for history. You see, they are vanishing from sight.  Shrimp seems to mainly come for fresh water farm ponds in the lower americas and soon these beautiful boats will be a thing of the past.

The Japanese concept of Wabi-Sabi:  “connotes a way of living that finds beauty in imperfection and accepts the natural cycle of growth and decay. Characteristics of the wabi-sabi aesthetic include asymmetry, asperity (roughness or irregularity), simplicity, economy, austerity, modesty, intimacy and appreciation of the ingenuous integrity of natural objects and processes.

Thus begins my exploration of Sabi

You had better get out and enjoy them while you are able too..

Here captured in Black and White, is a detail shot of the shrimper Lila Lee.  She is resting in the boat grave yard in Georgetown, SC. The older shrimpers seem to be abandoned along the shore here in Georteown till they sink.  We have some sitting on the bottom growing trees and weeds from their decks.

This image was captured on the Fuji X-E1  with a MC Soligor 70-300mm C/D manual focus macro lens, another relic of the past…

Lila Lee

Lila Lee

Further X-E1 Long Exposure Work


Fuji X-E1 280 second exposure at f/8

Fuji X-E1 280 second exposure at f/8

 

Or, if your are thrown off the horse, climb back on!

 

I went out tonight at sunset to the Pawleys Island Pier to try some more very long exposures with the Fuji X-E1.  I used the new 18-55mm lens with a B+W 6 stop ND filter until it got really dark then I shifted to just the lens.

It was just perfect out tonight.  A few clouds in the sky, medium wind and very little blowing sand in the air.  I setup with an angle on the pier with the moon behind my back.  I got there early enough to setup and pre-focus.

I used my Sekonic L758DR light meter with 6 stops of exposure compensation dialed in for the ND filter and started shooting.  In failing light, the hand held spot meter makes exposures easy, fast and perfect!  I simply aimed the 1 degree spot at the gray/purple band of clouds right next to the horizon and took my meter reading from that. Then I moved it from Zone 5 to Zone 6 or 1 stop brighter.  The meter gave me 15 seconds of shutter speed and f/22 so I simply added 1 more stop by changing the shutter speed to 30 seconds!  Very easy and by using the Zone system when thinking about exposure it can fast become second nature.

Fuji X-E1 30 second exposure at f/22

Fuji X-E1 30 second exposure at f/22

The first 10 min or so I was only able to get 30 second exposures but only at f/22.  I did have a 10 stop ND filter in the bag but I decided to just stay with the 6 stop. Even at 30 seconds, they were still quite pleasing!  I really like the Time mode on the X-E1 as it makes setup easy, but the Bulb mode is very well thought out. It gives a nice count up timer on the LCD screen and makes for perfect exposure!

Even checking the focus after it gets too dark to see is easy with the X-E1. Place the camera into manual focus mode place one of the pier lights into the middle of the focus square and push the jog dial straight in. This will cause the camera to magnify what is inside of the cameras focus box. You then go back and forth with the lens focus ring till you get the smallest sharpest light!  All done.

As it got darker I was forced to re meter the scene again and again. For this next shot the light had faded another entire stop and forced me to again double the shutter speed to compensate for the changing conditions and still allow me to capture the clouds on the horizon at Zone 6!

60 second shutter speed at f/8

60 second shutter speed at f/8

 

Things start to get very complicated and fast as the sun falls below the horizon.  The next image was metered at 140 seconds but during that exposure, the light dropped another 2 stops!  so I split the difference and increased the exposure by keeping the shutter open another stop or 280 seconds.  this worked quite well and gave a very pleasing exposure!  Please keep in mind that this image was taken after the sun was totally gone and it was quite dark out but with enough light left to give a good exposure of the clouds and pier. You can tell that this image was taken in very low light because the pier lamp reflections are prominent in the picture.  Here is that image:

280 second exposure, f/8

280 second exposure, f/8

Remember, for every minute of exposure the camera requires a minute of noise reduction. So for the above exposure the total time of forced waiting was 560 seconds!  So for this last image a lot of time passed while I waited and it was TOTALLY dark out now.  The moon gave very little light but the lights on the pier worked very well and put some interesting colors on the waters surface!

Ok for this last image there is ZERO light left in the sky.  The stars are very bright and fill the sky with a wonderful pattern.  But, the pier lights are so bright that they pollute the image and wash out the sky blocking the stars in the image.  Another complication is that it is just too dark out now to need the ND filter.  So I removed it and adjusted the meter so that the compensation is now set to zero.  The reading suggested was 425 seconds at f/8.  Why f/8?  Well I desired the sharpest image possible so I locked the meter to that.  I still needed to move the lower sky 1 stop brighter, you know from Zone 5 to Zone 6.  This made it necessary to move the shutter speed from 425 seconds to 850 seconds (14 minutes) and now I am ready to shoot.  So lets look at this last shot, 850 seconds of exposure then 850 seconds of in camera noise reduction.  So I have to wait for 28 minutes from the start of the exposure until the image popped up on the LCD panel!

Here is the final image of the evening, a 14 minute exposure at f/8.  Yes the pier light reflections close to the pier/water intersection is a little harsh but still, this demonstrates exactly what you can achieve by thing long exposure, but more importantly, it shows what the Fuji X-E1 is capable of capturing with a little bit of creative thinking!

850 second (14 min) exposure at f/8

850 second (14 min) exposure at f/8

Did you find any of this post helpful?  Please let me know!

Dang, “DID I REALLY DO THAT? REALLY!!!”


Sometimes you get the bear, sometimes the bear gets you…

Long day today at the gallery.  The electrician was in all day installing 22 new high intensity lights with floods to better light the co-op walls.  But the place has a lot of dry wall dust around and a simple sweeping will not be enough.

I needed to get away…

Skittles & me.

Skittles & me.

So at 5 I went home and took the doggy out.  She was happy to see me to say the least.  I really do not pay enough attention to her.   But after a half hour there with her I grabbed:

  • Fuji X-Pro 1 camera
  • Fuji 18-55mm lens
  • 3 stop ND
  • 6 stop ND
  • 10 stop ND
  • Sekonic L758DR spot meter
  • Remote shutter release

Please notice that I did not grab my camera bag…

So off we go to the island.  I did the Pawleys Island Pier the other night so I headed to the south end and the groin there to shoot some long exposures.

It was nice out, warm and empty of people.  Perfect.  Got out the Sekonic, dialed in 6 stops of EV to correct for the B+W 6 stop ND, set the meter to ISO 200 and started taking reading off the sky just above the watery horizon.  Got several changing values but it was fast getting dark.  The first few image captures went very well and I was starting to warm up to the evening on the beach.

Feel guilty being out here tonight, Ellen (my wonderful wife) loves the beach and has been deprived of this for the entire year and to add insult to injury she is working all night at the local hospital.  I suppose that i will just have to enjoy this for her.

Pawleys Island south groin.  30 seconds @ 30 seconds.  Fuji X-Pro 1 with the 15-55mm lens.

Pawleys Island south groin. 30 seconds @ 30 seconds. Fuji X-Pro 1 with the 15-55mm lens.

I got some very nice 30 second shots at f/11 but I was aching for something more meaningful, you know around 20 minutes!  So it is time to change things around and go after the really long exposure.  I get out the meter again, set it and the camera to f/8 for the best sharpness, check the shutter speed… hmm f/8 @ 8 minutes but this is a metered spot on the horizon and I simply do not want it in Zone 5, so I add in 2 more stops to move it into Zone 7, set the camera and shoot!

Time goes by…

Still going by…

Slowly…

10 minutes have gone by… Why didn’t I bring a flash light?  It is so dark that I can hardly see!  Gee Mark YOU KNOW BETTER THAT THAT!  So I give myself a smack on the head, then shake it in minor annoyance of myself and … HEY WHAT THE HECK!! MY FEET ARE WET!!  THE TRIPOD IS SINKING INTO THE SAND!  DANG!  DARN CRAP!!

Stop the exposure at 11 minutes and move the tripod up the beach to dry sand  and wait….

Still waiting…

Dang, the in camera long exposure noise reduction takes sooooo looooonnnnggg… Didn’t I tell you that what ever you long exposure is the camera takes the same time after it to do a noise reduction???

I QUIT!  I carry the tripod/camera to the truck  with it still doing the noise reduction when it happens… you know, the REALLY BAD THING!

The camera quit the noise processing and the image pops up into the LCD panel  and it is….

WHITE!   WHAT HAPPENED?  

I got wet for white? I stood here for 22 minutes for white?

THE EXPOSURE WAS PERFECTLY METERED AND ENTERED INTO THE CAMERA! THIS CANNOT BE MY FAULT…

Ohhh…

I am SO STUPID!  Look at that, the ISO has been set to 1600 instead of 200.  How did that happen?  I only shoot at high ISO’s when I am with the grandkids at Disney World! Now I recently got back from Disney and I took this camera and haven’t  used it since then…. No, that can not be it, the first 30 second images came out properly as metered…

Hmm, lets see, ISO 200 to 1600, and the image had already been shifted from Zone 5 to Zone 7!

DANG AGAIN!  That is an additional 3 stops of brightness..  ZONE 10!

!*:$@!)&$ DANG, (*!#&(^!(@&) DARN )(*&$&#@)$&

Ok, I am calm now, it didn’t cost any film, wet feet can dry and I can go out and shoot it again on another night.  ZONE 10!!!  No wonder the image was white! !#)*(#*@&(E*Q&R

22 minutes W A S T E D and no ultra long exposure.

_____________________________________________

OK, what did I/WE learn here?

  1. BRING A FLASHLIGHT!
  2. Be aware of the changing tide!
  3. If you are going to take super long exposures DOUBLE CHECK YOUR EXPOSURE VALUES and do NOT forget to check the ISO!  I think someone walked up to the camera in the dark and changed it on me while my back was turned!
  4. Bring a change in socks!

See, we all make mistakes, even photographers with 48 years of experience!

Got it?  I hope so, because I would be so embarrassed to hear that you made so many beginner  mistakes,  After all we do have appearances to keep up!

Smile, life goes on… and we occasionally get lucky.  In the parking lot packing up to leave I see this across the tidal creek…

Moon over the Marsh.. 4 second exposure

Moon over the Marsh.. 4 second exposure

So the bear won this time but there is always tomorrow night…

Update:

I have had a lot of questions about this creek image.  Mostly folks want to know how I got a dark blue sky in the deep night!  And it was totally black out when I took this image.  There was supposed to be NO moon this night.  But for some strange reason there was the smallest sliver of it showing under its bottom.  I mean so small that it was almost cut with a knife!  The clouds below the moon were barely there because for what ever the reason the moon was getting a little light it reflected down and highlighted the clouds.  Above the moon the sky took on the deep blue cast (again due the to the strange lighting on the moon).  This only lasted about 5 minutes then the moon disappeared totally, the sky turned black and the clouds lost their light and faded from view.

The exposure data:

  • ISO 200 (yes I double checked this time)
  • 4 second shutter
  • f/4