Mar 24 2020

The Ethereal Nature of Long Exposures Part 1: The Daylight Exposure

A conversation on how to easily create amazing Long Exposures

What is needed to create these ethereal DAYLIGHT images!

Warning, this is going to be a 2 or 3 part tutorial and exceptionally long!

Jekyll Driftwood Beach, 400s

Ahh Peace… I love the ethereal nature of the process in ultra long exposures. Sitting there behind a good camera exploring a composition, light and movement while waiting in great anticipation of the outcome fills me with such inspiration that I can hardly contain myself!

While these types of images take a large degree of patience and dedication to the art, I have found very few photographers who having never tried them fell fast under their soulful control! I tell you now that with a bit of basic equipment and easily learned skills that ANYONE with a bit of patience will succeed in this artistic endeavor. Yes you need some extended functionality in your camera system (most modern DSLR and Mirrorless systems have it!). Yes you will have to buy a set of “sunglasses” for your camera lens called ND filters (this is where you will find the expense). But believe me this style of photography is SO worth it.

Roanoke Marshes Light, 3 seconds

But how easy is it to create these peaceful images that speak to your soul? For me the process is quite simple, but I tend to forget that 58 years of experience makes this all easy for me.

So with that in mind I am going to take you through my entire processes and share my equipment lists with the reasons why I chose them and when to use them.

Let’s start out with a quick discussion of what a long exposure actually is:

Any shutter speed longer than 1 second is considered a long exposure.
The upper limit is… well, UNLIMITED! Usually photographers start out at a 30 second exposure in order to get their base exposure locked in, then move up to 2 min or greater. I typically try to target 8 to 15 min for my final image but have several in the 60 min range also.
Typically shorter exposures are needed for falling water in the 10 to 15s range. If you desire to highlight the swirls in the pool under the falls then much longer times are necessary
There are several types of long exposure photography. Here are a few with a bit of discussion about what equipment you need to work them
- Daylight with the sun up: This style is most likely the easiest of the LE areas to explore. Most of your scenes along the beach will have brightness levels of the sky and foreground close enough to fit within the dynamic range of your camera and only need solid ND filters.
- Sunrise/Sunset: This style of LE work is more difficult as the sun nears the horizon during Sunset and as it gets close but not over at sunrise. Lighting conditions are way more difficult and still require solid ND filters but will additionally require 2 specialized filters, a 3 or 4 stop soft edge graduated square filter and a reverse graduated square filter. The light intensity around the horizon will make these image impossible without the graduated filters (more on this in the 2nd post)
- Night Long exposures: Milky Way, Star Trails and others. This is a specialized pursuit that requires different lenses and filters and will be saved for another day.

Camera Features and settings needed

Any DSLR or Mirrorless camera (I use a Fuji GFX 100 medium format digital). You will want the following features and settings:

Aperture mode to determine base exposure
Long exposure noise reduction set to automatic.
- Photographers new to long exposures might want to turn this setting off. Here is why: When you create a long exposure image, say 30 seconds long this is what happens with LE Noise reduction turned on or automatic.

1. 1. The camera fires and takes a 30 second exposure
  2. The shutter closes
  3. The camera keeps the shutter closed and takes a second 30 second exposure in the dark between the shutter and sensor. This is called a Dark Frame Exposure
  4. The camera then combines the 2 images and subtracts the noise

While 30+30=60 seconds does not sound like too much of a wait, if you are in the learning process and going thru the trial and error mode that 30 seconds turns into 1 min, a 2 min exposure turns into a 4 min, 4 to 8, 8 to 15 and so on it goes. This takes a lot of time especially at sunrise/sunset when the light is rapidly changing!

TIP: YES you want the LE noise reduction turned on to get the best and highest quality that the camera can provide, but when learning and making exposure mistakes while calculating ND filter offsets for the shutter these long times degrade your learning curve. So turn it off until you get used to all of this then when comfortable with LE work turn it on AUTOMATIC and leave it there. It will only affect exposures over a certain time which is dependent upon your camera. My GFX 100 turns on at 15 seconds, others at 30 and so on.

Pixel Remote for all cameras

RAW capture mode turned on
Color space set to Adobe RGB
Manual mode with a BULB or TIME setting
- Bulb is where the shutter is open as long as the remote shutter release is active
- Time mode is where you can set exposure times in full stops usually out to 30 or 60 min. With this mode you do not need a timer or a remote shutter release, you set the time fire the camera and sit back.
Remote shutter attachment with a timer display built into it with cable for your camera. This works wired or wireless. I suggest this one HERE
VERY sturdy tripod that you can spread the legs out wide and low. Good tripods are very expensive but can last for you entire life. Look to Really Right Stuff for the best.
A small 3 leg photography stool (Amazon) to sit on and BE STILL. See it HERE
A small red headband flashlight. Turn it OFF hen not needed!

Camera Lens

Lens, a wide zoom. 95% of the time I use a 32-64mm f/4 lens (35mm equivalent of 23-58mm) on my GFX 100 for my long exposures. On rare occasions I have a GF 100-200mm when I desire a detail shot of a waterfall, and a GF 17mm for those times that demand a very wide view.
Most of my students use a 24-105mm f/4 that will cover most all of the scenes you will run across.
You do NOT want a fast f/2.8 lens for long exposures. By adding the extra fast 2.8 setting you loose a more closed down setting like f/22 or larger which will be useful for getting the long shutter times with less ND.

Filters needed for long exposures:

Filters you say??? But WHY?

Well the simple answer is that in order to do long exposures you need to have long shutter times! The filters we use are called ND or Neutral Density filters. They come in several types and styles and they act as sunglasses cutting the light down going into your camera forcing it to longer shutter times to compensate!

Yes, I am afraid that they do cost a bit of money, but purchase the best you can afford, you will not be sorry!

Filters companies are a subject full of differing opinions, many good and many with issues so I will discuss my personal filter decisions and why I choose as I did!

I have been through several companies filters over the years and have used the following.

B+W. Good filters, a bit expensive and limited to round screw on only. They change the white balance of your camera to a brownish tint… They come in all of the standard values and even offer a rare graduated screw on that places the start in the middle of the frame.
Lee. Again, Good filters, very expensive and made of plastic that are very easy to scratch with one or two in glass. They change the white balance to a blue cast. Lee offers ALL of the filters you could possibly need for any type or style of long exposure work
Singh Ray filters. Intolerably expensive. They come as screw on and several sizes of square/rectangle styles.
Breakthrough Photography X4 filters. These are simply the best filters that I have ever used! They are all hardened optical schott glass, ZERO color cast and have an unconditional 25 year warranty! They come in all types and styles, (more on this later) and mount options:
- Screw on
- Magnetic
- 100mm and 150mm squares/rectangles

**BASIC DAYLIGHT ND Filter suggestions for after the sun is up higher in the sky or 1/2 to 1 hour before sunrise!**

3 stop solid ND, sized to your camera lens or a square/rectangle system
6 stop solid ND, sized to your camera lens or a square/rectangle system
10 stop solid ND, sized to your camera lens or a square/rectangle system
15 stop solid ND, sized to your camera lens or a square/rectangle system

TIP: I find that I use the 6 stop, 10 stop and 15 stop most of the time

Breakthrough 3 stop ND

For normal daytime exposures the sky and foreground (especially the ocean) usually have the same tonal range. For this type work just a solid ND set is needed. Solids are the same dark density across the entire glass. Take a look at the 2 images below. Notice how the sky and foreground are at the same basic brightness value?

The TOP post image is also another example that is right on the edge of needing another type of filter!

Pawleys Marsh, 30 seconds. B+W 10 (110) stop solid filter

Since the difference between the TOP and BOTTOM of the image falls within the dynamic range of my camera only a 10 stop SOLID ND filter was required! Exposures like this only need a solid ND filter! For this image I used a B+W 110 (10 stop solid) and fixed the white balance in the RAW conversion.

TIP: Do NOT worry about aperture diffraction on long exposures. Remember that we are AVERAGING and the diffraction errors go away. Use the complete range of your aperture to get the shutter speed you desire!

For color work the rule is the same, as long as the upper half and the bottom half of the image falls within the dynamic range of your camera a solid is all that you need! The Roanoke Marshes Light below is an example for you.

TIP: People moving on a dock you are shooting? DO NOT WORRY! On a long exposure with people walking in the scene they will disappear unless they stand still more than 1/4 of the exposure! The image below had 4 people walking down and back on the dock!

Roanoke Marshes Light, 40 second exposure single 10 stop solid Breakthrough X4 ND.

The MOST IMPORTANT Lesson!

Ok, here it is: The HARDEST part of a long exposure image is learning to calculate the exposure values necessary to get the softness/tearing that you desire. Actually this is very simple and below you will find the steps to easily do this! I am going to show you 2 ways to do this. The first and most important way requires to you multiply/divide a simple number by 2 which is ONE STOP either for the shutter speed or the aperture! But first, we need to understand what a full Stop means for shutter speed and aperture!

Understanding Full Stop Shutter and Aperture Relationships

Shutter Speed Example Full stop Changes:

Shutter Speed Values

1/60s to 1/30s
1/30s to 1/15s
1/15s to 1/8s
1/8s to 1/4s
1/4s to 1/2s
1/2s to 1s
1s to 2s
2s to 4s
4s to 8s and so on.

Full stop changes to your shutter speed is simple dividing or multiplying by 2

Being off by a small amount will make no difference as the shutter speed gets longer.

Aperture: aperture values cannot be calculated like shutter speeds. Aperture is logarithmic and the math is difficult to an extreme. Todays aperture values on almost all of the digital bodies are usually in 1/3 stop values! Below you will see the FULL stop values that we want to use for ease of calculation.

FULL STOP Aperture values

Exposure Calculation Version 1

Discussion on using FULL STOP Aperture and Shutter Values to calculate exposure offset for various ND filters

START: Set the camera ISO value to the lowest native value that the camera supports. This is usually 100 or 200. Some cameras will go down to 50 or 64. Also, most cameras have a LOW ISO setting, DO NOT USE THIS SETTING because the camera artificially gets it lower by decreasing the Dynamic Range of the camera which decreases the quality of your image!
Start by taking a picture in the Aperture priority mode with the aperture set to f/8 to get a base exposure that was good in camera with no ND and say that it metered at f/8 and 1/60s

If your lens goes up to f/22 then we could change 3 stops on the aperture with no ND installed from f/8 to f/11 to f/16 to f/22 which will cause an under exposure of 3 stops that we bring back into the perfect exposure by decreasing the shutter speed by 3 stops or 1/60 to 1/30 to 1/15 to 1/8 seconds. Still not long enough for the purpose of smoothing water so now we add a ND filter
Putting a 3 stop ND on your lens would again under expose by 3 full stops which we counter by decreasing the shutter speed 3 more stops from 1/8 to 1/4 to 1/2 to 1 second. Again really not long enough but we are getting there!
So how about replacing the 3 stop ND with a 6 stop ND? This will give us 3 more stops taking us from 1 second to 2 seconds to 4 seconds to 8 seconds! Now we are getting somewhere!
For a longer yet shutter speed we could replace the 6 stop ND with a 10 stop ND! This gives us 4 more stops of under exposure that we compensate by making the shutter speed longer by 4 stops! So 8 seconds go to 16 seconds to 32 seconds to 64 seconds to 2 min (now round to the whole min because 8 seconds difference from 128 seconds to 120 seconds will make no difference)
Not long enough? Let’s replace the 10 stop ND with a 15 stop ND! This gives us 5 more stops of under exposure from the 10 stop ND. We compensate by adding 5 more full stops of shutter speed going from 120 seconds or 2 min to 4 min to 8 min to 16 min to 32 min to 64 min.
If this is too long you can now open the aperture 2 stops which will allow you to shorten the shutter speed of 16 min or 3 stops to 8 min!

Do you see the relationship between full stop changes in aperture and shutter speed?

This is all you need to do!

Exposure Calculation Version 2

There is a FREE long exposure calculator for your smart phone called: LEE STOPPER. You will need to download and install this app to use this technique!

How to determine your exposure:

Set the camera ISO value to the lowest native value that the camera supports. This is usually 100 or 200. Some cameras will go down to 50 or 64. Also, most cameras have a LOW ISO setting, DO NOT USE THIS SETTING because the camera artificially gets it lower by decreasing the Dynamic Range of the camera which decreases the quality of your image!
Take a picture in the A (aperture priority) mode with the aperture set to f/8
Read the exposure data from the back of your camera and note the shutter speed the camera used!
Set the camera mode to M (manual) mode
Open the Lee Stopper app on your phone
Choose which of the 3 ND values you would like to use in the app, 6, 10 or 15 stops
Enter the shutter speed into the app by turning the white wheel (see below)
Read the new shutter speed from the blue wheel for the chosen ND filter
If the desired shutter speed is less than 30 seconds enter it into the camera with the shutter speed wheel on the camera
If the desired shutter speed is more than 30 seconds then move the shutter speed wheel on the camera to B or BULB
Connect the remote shutter release cable. If it has a timer on it like the suggested one above then put it into the BULB mode and press the button to fire the camera. Watch the timer on the shutter release and when you get to the correct time press the button again to stop the exposure.
Remember if you have the long exposure noise reduction on in the camera the camera will now take another exposure with the shutter closed for the same time as the step above. When this is finished you can view the results on the camera and if not to your liking adjust the shutter time up or down or change the aperture up or down to adjust to your liking and re-shoot.
If you do NOT have a remote shutter release with a built in timer you can select the stop watch button on the bottom of the Lee app (look at the pic below) and it will automatically move your shutter speed to a stop watch in the app. Press and lock the remote shutter release and press the start button on the stop watch screen of the app. When finished, the app will alarm you to stop the exposure.

TIP: for values between full stops (those shown in the app) you can partially move the wheel to the small ticks between the full stops to offset the exposure for partial stops.

Enter Base exposure and read new ND exposure

Stop watch timer in the Lee app

This is all there is to calculation version 2!

Subject considerations

Seascapes:

Clam Creek Pier Jekyll Island, 2 min exposure, 10 stop Breakthrough X4 ND

The ocean surf can give you some of the most amazing images! The waves are AVERAGED during the long exposure so that one builds on another each averaging the wave before it until you get a perfectly flat reflective surface! Notice the great reflections that you can get because of the averaging!

Shot Setup: To create this shot above I set the tripod on on some rocks along the waters edge. I looked for a composition where the pier came in from one side to the T where I could smooth out the water and get a good reflection. I also made sure that there were no ships passing by. Then did a base exposure test of 30s and used an aperture of f/8 . at 1/8s. I then added a 10 stop solid ND and adjusted my shutter speed from 1/8s to 1/4s to 1/2s to 1s to 2s to 4 then 8 then 16 then 32 then 64 then 120 (2 min)

photography stool

TIP: Sand is your enemy! It is full of water and when someone walks by (within 4 feet) the pressure of their feet pushes the water away from their shoes causing the sand to rise around your tripod legs! You might think that this is minor but it will ruin exposures from 2 min and longer! STAND STILL! ASK PEOPLE TO WALK FURTHER AWAY FROM YOUR SETUP! Take a small 3 leg photography stool and SIT DOWN and NOT MOVE! See HERE

Nags Head Pier in Fog/high surf/high wind, 15 min exposure, 15 stops Breakthrough X4 ND

Screw

For really large waves and/or fog you tend to get a more etherial look that is really pleasing! This image was a difficult one to capture due to the large surf, fog and high winds.

Shot Setup: For the above shot took serious thought. With gale force winds from right to left, the Surf was about 12 feet high filling the air with salt spray and since this was a workshop there were 14 people moving about on the sand. I took my tripod and splayed the legs way out to the sides and shortened them to put me almost on the ground. I then sat between the camera and the wind. I also took off the shoulder strap so that it would not catch the wind. Lastly I set up the remote shutter release in wireless mode so that even that wire would not catch the wind. The surf was so high that nothing less than 15 min would give me the look I wanted with pure white water and the fog. Even though there was heavy fog, please notice that the pier is angling down as it goes out. The white a the end is a combination of the fog and the ultra high waves hitting the under side of the pier! This shot was a 15 min exposure at f/32 using a 15 stop Breakthrough X4 solid ND.

TIP: Wind is your enemy and hard to overcome. Splay your tripod legs wide and drop the tripod as close to the ground as you can. Sit between the wind and the camera to block it as best you can. You can put weights under the center post and if on sand buy a dog chain screw that you turn into the sand. Attach a truck tie down strap from the tripod to the screw and tighten it down further reducing movement. Find it HERE

Nags Head Pier, 15 min exposure, 15 stops of Breakthrough X4 ND

Shot Setup: Another image (but different) of the Nags Head Pier. This scene had a 6 foot surf and hardly any real wind. As I studied the scene I realized that the faint clouds in the sky were moving away at an angle and I wanted them to be a major part of the composition along with totally smooth water surface. I setup the tripod with the legs splayed out wide and low to the ground for greater support and wind control. I did not have a lot of time to work this so I started with a 2 min base exposure and then calculated it for a 15 stop X4 ND and took one shot. Total time for this single shot was a 10 min setup with a 4 min base shot (with LE noise reduction on), then the 30 min shot, 15 exposure and 15 dark frame. There were a lot of people moving up and down the pier who simply were not captured in the averaged exposure. I am very pleased with the results.

TIP: Surf and sand is your enemy. With your tripod feet on the sand should a small wave washes over one the tripod will TILT or SINK! If this happens stop the exposure because it is ruined, move your setup higher up the sand and setup again and re-shoot!

For longer exposures in the 4 to 15 min range aside from the wave averaging you can also average the movement of the clouds! Do you see how the are streaming away from us?

TIP: Surf is your enemy. Keep your camera bag behind you higher in the sand!

Brunswick GA. Bridge, 15 seconds, 10 stops of Breakthrough X4 ND.

Shot Setup: For this shot above I was at the bridge leading into Brunswick GA. There was an old bridge this that had been cut off and turned into fishing pier. It was super stable and there was no wind. This was supposed to be a sunset shot but the bridge kept calling to me. So, listening to my inner voice I decided to shoot this in the vertical format and concentrate on color on the side of the bridge, its lights which I wanted to generate star bursts on. The color in the sky was amazing and with the clouds moving sideways I knew it would make a great image. I chose a 10 stop X4 ND. I took 2 or 3 images in this location and liked this the best!

Another advantage of the cloud tearing, water smoothing effect of the longer exposures is the starburst around any bright light in the scene caused by having a very small aperture f/11 to f/22. I think that it adds an amazing compositional image!

TIP: To capture a sharp star pattern on bright lights in your composition use a small aperture!

Duck Island NC Pier, 8 min exposure, 15 stop Breakthrough X4 ND

Shot Setup: This image above was on the boardwalk on Duck Island in the Outer Banks. The water here was green with white caps. Nothing remarkable. The pier on the other hand was stunning with its colors, textures and form! The sky was very overcast and with no form or structure but I thought that a long exposure would pull out a bit of shape. The boardwalk was very stable so I did not have to worry about vibrations. I setup carefully to directly center the pier in the frame. My focus point was 1/3 down the pier as I wanted detail in the rope. I set the aperture to f/32 for the greatest depth of field. I did one base exposure at 1 min and then calculated the exposure for 8 min. This is the single image I took here. I find it very pleasing and ethereal!

TIP: Birds flying through the scene on a long exposure will disappear from the scene due to the averaging of the exposure!

As I said above this introductory tutorial is set up to be presented in 2 or 3 separate posts. Look for Part 2 Sunrise/Sunset Long Exposures and the special filters needed in about 2 weeks!

This is the next type of long exposures we will learn about creating in post #2!

Nags Head Pier Right At Sunrise! 15 min exposure with 3 different ND filter types installed!

As always please let me know what you think of this!

Mar 2 2019

Creating Etherial Long Exposures With Breakthrough Photography’s X4 ND Filters

The Peace Of The Creative…

Slowing down creates peace on multiple levels.

For you as the photographer and for those who view your work, this has never been more true!

I am going to do a slightly different type of post this time.

We will discuss the art of Long Exposures a bit but we will focus more on the technical aspects of using ND filters to correct for different types of lighting as well as talk about good ND filter systems verses not so good, and why it is always best to invest your money in good filters!

Definition: Long Exposure – To create an image in camera with the shutter open for longer than a few seconds in order to smooth out movement over time. This can be softening the flow of water over a waterfall, flattening of waves in lakes and oceans or tearing clouds moving across the sky.

Setup: For camera setup you want a long shutter speed (for me usually from 20 seconds to 60 min), mid range aperture (f/16) and the base ISO that your camera provides. You do NOT want to switch on the L ISO in your camera. While it forces the ISO lower it costs you in reduced dynamic range! You should also verify that your camera has Long Exposure Noise Reduction turned on. This is a royal pain due to doubling of exposure time and forcing you to wait twice as long for a shot but it removes sensor generated noise as well as sensor hot spots.

Note: I have added a video to the bottom. It discusses everything and more that we are talking about in this post but it is quite long!

The top image was taken at the always inspiring Roanoke Marshes Lighthouse across the sound from Nags Head Island in NC. As one of my favorite locations for sunrises over the lighthouse it is also a most worthy location for daytime long exposures! These are usually very easy to create due to the small waves in the sound! This image was done on a Fuji GFX 50R medium format digital with a 32-64mm GF lens, 6 stops of ND (Breakthrough X4 magnetic) and a X4 2 stop soft graduated ND on the sky to balance the difference between the sky and water. The exposure was 20 seconds an hour after sunrise and in the rain.

But by what criteria did I choose the solid ND and the soft edge graduated ND? This is where a little technical knowledge will really help you in creation of amazing long exposures.

First, there are a few points to consider when thinking about using ND filters:

ND filters are simply sunglasses that you put in front of your lens to limit the amount of light that reaches the camera.
There are 2 basic styles of ND, Full and Graduated. Full covers and darkens light passing through the entire lens, Graduated cover and darken only part of the light passing through the lens with the ability to rotate the edge angle of the start line and moving the line up or down in the scene.
In the full family there are several values and styles.Breakthrough Magnetic lens mount with the rotating dial on the back to rotate the filter
- Screw on: they simply screw onto the end of your lens
- Magnetic: these are a new (2018) system from Breakthrough Photography. They require you to buy a special magnetic mount bracket for the filter threads on your lens. The adapter has a rotating ring that allows the filters to be actually turned (for use with polarizers) and costs about $20. Currently, Breakthrough is re-designing both the magnetic filters and the magnetic lens adapters to allow for stacked magnetic filters. This should be completed by summer 2019 and they will replace the older style magnetic filters and adapters. It is important to tell you that when you use the magnetic filter system alone or with the square system there is NO vignetting.
- Breakthrough Square holder that attaches to the magnetic adapter
- Square: these use a square holder and in the case of the Breakthrough this holder will attach directly to the magnetic holder allowing use of and stacking of both systems at once. The square holder will hold 3 to 5 filters depending upon how you initially set it up. This is good for difficult lighting situations where you might need two different graduated filters at the same time. This style tends to suffer from light leaks around the edges of the square solid ND filters unless you carefully assure that they are installed exactly right and only in the holder slot closest to the lens.

In the graduated family there are several types:Breakthrough Photography X4 soft Graduated 100mm filter system
- Hard edge graduated: where the dark area of the graduated filter is a sharp line. This is for use on subjects which have a harsh division between the foreground and background . An example would be shooting on the ocean where the horizon is a sharp line between the horizon and the sky. This is where you would choose a hard edge graduated ND. These filters usually come in 1, 2 and 3 stop values where they start light and graduate to the dark.
- Breakthrough reverse grad
- Soft edge graduated: where the dark edge of the graduated filter starts very soft and light and darkens as it moves up the filter. This is for use in areas that you need to balance the foreground from the background but there is no clearly defined edge in the scene. This is what I used in the image above to darken the sky so there was detail there and still enable the water foreground to be bright and almost a platinum look and feel. These filters usually come in 1, 2 and 3 stop values where they start light and graduate to the dark.
- REVERSE graduated: this is a special graduated ND where it starts DARK and graduates up to lighter values. If you desire to shoot sunrise/sunset this is a MUST have filter because as the sun approaches the horizon you get a very bright line of colors there that will either be blown out or if exposed correctly cause the rest of the image to be way too dark! These filters usually come in 1, 2 and 3 stop values where they start dark and graduate to the light.

So for the Roanoke Marshes Light above, I chose a Breakthrough magnetic X4 (newest technology) 6 stop solid nd to darken the entire image allowing for the 20 second exposure with the camera set to the lowest native ISO value (100), an aperture of f/16 and a shutter speed of 20 seconds. the initial results of this exposure was pleasing water in the foreground but the sky was also too light with little to no detail. So I left the 6 stop magnetic filter on the lens and clipped on the 100mm square filter adapter onto the end of the magnetic adapter and installed a X4 soft edge 2 stop SOFT graduated ND filter. While watching thru the viewfinder I adjusted the graduated ND up and down making sure that the soft edge came down to the horizon or a little above darkening the sky to allow for more detail there yet allowing the soft white water in the foreground! It was as simple as that! The entire process after the first shot took about 30 seconds to setup on the camera lens then shoot!

So let’s talk about sunrise/sunset images when the sun is close to the horizon. We have all been out at sunrise, do you remember the very bright band of intense color that it right at the horizon as the sun approaches? This is why the reverse grad ND filter was created, to keep the bright colors from destroying the overall exposure! Here is an example image, amazingly at the same spot!

Do you see how bright the light is at the horizon? The ONLY WAY I was able to capture this image was to use the reverse grad ND placing the dark section right on the bright band of light. Because the overall exposure was only 3 seconds no other ND filters were required. Should I have desired a longer exposure to further soften the water’s surface I would have dropped in the 3 or 6 stop X4 magnetic filter into the adapter already on the camera!

Let’s take a short side trip here and discuss the actual filters. By now you all have seen that I am a strong user and promoter of the Breakthrough Photography X4 line of magnetic and graduated filters. There is a reason for that:

All dark solid ND filters suffer from some sort of light leaks around the slide in filter holder. The magnetic mounted X4 Breakthrough filter line has solved this problem.
The X4 Breakthrough filters have ZERO COLOR CAST! This is a really big deal. I have been a big user of B+W and Lee filters over the years and still have them on hand. Unfortunately, both of those both have strong color casts that force me deeper into post processing to attempt to correct these color casts. I had always thought that this was simply the cost of doing long exposure! Well NO MORE! I am so pleased to report that those problems are not the case with Breakthrough, ALL BREAKTHROUGH filters! Cost wise they all cost about the same when you get up into the same quality levels (B+W, Lee, SinghRay and Breakthrough). So for me it was an easy choice, I have totally converted over to the Breakthrough X4 line of filters. I currently am using the magnetic and square system from them.
There is ZERO vignetting with the magnetic system on ANY of my lenses. I currently and using 72mm, 77mm and 82mm lenses and mounting both the magnetic system and the 100mm system together!
Breakthrough filters come with a 25 year guarantee and their customer service is crazy good. They are currently (Feb 2019) working on an updated magnetic system where the filters can be stacked in the holder!

So my advice is this. Cameras come and go, it is your glass (lenses and filters) where your quality lays. Invest in the best you can. You will never go wrong with the Breakthrough system! (gee I wish they would pay me…)

Ok, back to images. After sunrise is done and before sunset is anywhere near we can still create AMAZING long exposures! There only 2 problems that we must overcome!

Slowing down the shutter speed to give the long exposure. During normal daylight we will likely be using a 10 or 15 stop solid magnetic X4 ND as long as the sky and the foreground are near the same exposure value.
Should the sky be brighter than the foreground we will also use a X4 soft edge graduated ND filter to balance the foreground and sky.

Here is an example of a scene with little difference between the sky and the foreground. The waves were HUGE this day so I used a X4 14 stop magnetic filter so smooth them down (490 seconds) and give the feel I desired. The fog in the sky took care of itself and I walked away with a balanced ethereal image that I just loved creating! Another example of this is shown in the image below. This again was a super foggy day so the need for detail in the fog was unnecessary so the oly ND needed was again the X4 15 stop magnetic filter!

Ok, let’s take a look at a problem image where the sky has detail that you can see but when you only use a solid nd the sky is totally blown out! What you simply need is a X4 Soft Grad filter to balance the sky and water to give you a bit of detail in the sky!

These last two images show a extreme case of no balance between the water and the sky and more nd was needed on the sky to correct the imbalance.

Ok, one last thing… I had a live group hangout last night with some of my online students and we discussed everything in this post but with more info and thoughts on choosing the correct ND filters for a number of scenes. Here is the link:

https://youtu.be/_qFkUJZzXmw

I know that this has been a long post but it was necessary to show the technical side of creating pleasing long exposures. Next time I will discuss how to meter for long exposures.

As always please let me know what you think!

Feb 7 2019

Learn the art of long exposure at our Georgia Coast Photo Workshop!

Georgia Coast Photo Workshop

March 7 – 10, 2019

Boneyard on Jekyll Island at sunrise

I LOVE working with long exposures…

There is so much peace in the long exposure process. At the scene, behind the camera and the results after processing simply takes my breath away. It does not matter what you decide to shoot with, Color, B&W, IR or Film because It simply does not matter, It all works. The processes of working with LE is that as we slow down the shutter of the camera we too are forced to slow down our mental process and be drawn into the scene! This works for boneyard shots at the beach, moving clouds over a building or simple rocks in the surf, It is an amazing journey in one single shot!

THE AMAZING IS POSSIBLE!

That is the thing about coastal Georgia. there are so many amazing photographic opportunities. Aside from the biggies, You all know how I love working in film and wabi/sabi, but creating long exposures is the one single photographic technique for me that always brings me peace…

This is your chance to learn the process, from artistic vision, choosing the correct filters and camera settings to post processing! Come along and learn all of these and more with Jamie and I. You will not be disappointed.

What exactly is needed in terms of equipment?

There are some equipment requirements for long exposures and as you find your self drawn into the process you will likely expand your catalog of gear, especially filters!

Good steady tripod.
Remote shutter release (wireless allows you to move around while working)
Fresh full battery.
Camera that allows a T or B mode
Low ISO capability
A basic set of screw on solid ND filters. These will work during the day time when the sky and foreground are the same brightness level. For times around sunrise/sunset you will need to add 2 basic graduated filters as well. ND filters are like sunglasses for your camera that come in different densities (darkness values).

My solid set includes:

3 Stop X4 solid magnetic Breakthrough
6 Stop X4 solid magnetic Breakthrough
15 Stop X4 solid magnetic Breakthrough
Polarizer X4 filter magnetic Breakthrough
Night Sky X4 filter magnetic Breakthrough

My square (75mm and 100mm) set includes:

10 Stop 100mm X4 solid Breakthrough 2.5 Stop 100mm soft edge graduated Lee
3 Stop 100mm X4 Reverse graduated Breakthrough
2 Stop 100mm X4 Soft Graduated Breakthrough

There are many makers of ND filters, I have always gone with B+W and Lee but the Breakthrough are much higher quality with a much higher cost. Because I have recently added a Fuji Medium Format digital system I am building a set of the Breakthrough filters in both solid and graduated using both their new magnetic system and the 100mm square filters for the graduated.

To start, you do NOT need all of these and the basic set will allow you to get started but you will run into trouble as the sun approaches the horizon on sunrise/sunset.

Learning how to use all of these filters is not difficult but you will be miles ahead of everyone if you consider a workshop that covers all of it PLUS the art of post processing your long exposures after capture. The Georgia Coast is a great place to do just this. We will be out all day learning behind the camera as Jamie and I wander around with you helping along the way, sharing our secrets for in camera, as well as the art of post processing in evening classes at the hotel! This is a great workshop to learn the technique of long exposure but not limited to that! We will spend time at a lighthouse, a old broken down building, piers, beaches and of course AMAZING SHRIMP BOATS!

Another view of the boneyard after sunrise!

You can download a PDF info link here:

https://app.box.com/s/qcw6ekysxgbe8tm8hb1l7a6nfytinly0

Jan 14 2019

Using B&W To Grab Your Viewers By The Throat…

Yes, deep moody B&W can capture and hold your attention!

Pawleys Island Marsh, North Causeway

I am always curious as to what people like and dislike about my images and make a point of posting them online to see what people think and how they respond. Sometimes the result of this practice really surprises me. The funny thing is that most of my personal favorites in B&W are not well received by the public! Yet those that I consider not as good get better reviews…

It does not matter what camera I choose to create with, Medium Format FIlm (Mamiya 645 AFDii) or digital (Fuji GFX 50r medium format), the output results are difficult to tell apart. I love working in film, its process from end to end defines art to me. But I also love working in medium format digital as well. It is a much shortened and simpler process and only takes a fraction of the time when compared to film. I think most of you will be hard pressed to pick the film/digital images that I am going to place in this post! So the source of the images make little difference to me.

Approaching Storm at Pawleys Island

Have you ever considered what it is about B&W photography that you are attracted to? What about it grabs you? For me, it is simple, the removal of color strips the scene to it soul allowing you to really become one with it. It removes the confusion and gives a pure view of the scene!

Consider the image of the approaching storm above. The clarity of the image draws me into the scene, the sharpness captures my interest and holds it. The dark moody tones make me feel like I am still standing right there!

Pawleys Island Beach Crossover in the fog.

I am not saying color work is bad, rather that I personally enjoy working in monochrome and enjoying the finished images processed in B&W much more that color work. I suppose that is why working in film is so addicting to me, everything about the process from working behind the camera, film processing, scanning and printing I find very enjoyable. But with the introduction of the Fuji GFX 50R camera system I am equally thrilled! You can shoot in both color and B&W on the fuji system. The real difference is that you can set it up with film emulation profiles in camera and generate and output true B&W RAW images! I find that I like using the Acros/red profile in camera because it matches my film work with actual Acros film! This gives me another entire workflow that matches my B&W film work 1:1! The fog image above in a good example of the ethereal nature that you can achieve when working in B&W.

Charlee Marie

The image above if Charlee Marie highlights this relationship between working with medium format Acros film and the medium format Fuji GFX 50r camera system. The amazing tonality of the boat and sky capture my attention and will not let it go. The subtle tonality of the wheel house is flawless. Overall this is one of my favorite images produced by the 50R, capturing the heart and soul of the shrimp boat in a non cluttered fashion usually associated with them on the easy to use medium format digital 50R! This particular image is one of my favorites from the 50R that has not been well received by the public, yet I cannot let it go…

Port Royal Shrimpers

The Port Royal Shrimpers is an example of everything coming together for a powerful image; Good Light, Clouds, Boats and reflective water plus being there! Of all the images captured with the 50R this one has the highest number of likes and comments online. Yes it is a powerful moody image but I am not sure if I personally like it more than the image above!

Daddys Girls, medium format Acros film

OK, on last image of Daddys Girls was taken last week on Acros Film on my 645 AFDII using a deep red contrast filter so the sky is a little darker. To me this is a powerful image and different from the digital work above it due to the deep red filter. Yet all other aspects of the image match equally to the work generated on the 50R system.

To me, this illustrates how well the film and digital systems can work together. There are times when working in film is just not possible or practical during travel where the 50R would work much better and easier.

I am happy that each camera system can complement each other so closely! It will make my life much easier and allow me to concentrate on creating art rather than on how I capture it!

As always please let me know what you think, I value your input!

Dec 12 2016

B&W Camera Systems: Functionality/Creative Power/Affordability/Film/Digital ??

**Getting your BEST B&W image!**

Outer Banks Pier, Monochrom Camera System

I wish to share some images and thoughts from the Leica M Monochrom B&W ONLY camera system. I know that it is NOT FILM and a very expensive camera system, but it comes as close as you can get in a wonderfully usable B&W only system!

Most people will take a color image then convert it to B&W in post processing but it will never be the same as actually shooting in B&W with a digital or film system! Yes you can get close but you loose the amazing gradations and tonality that is part and parcel to world class B&W images.

Dugger Creek Falls, Linville, NC M Monochrom

Duggers Creek Falls, Linville, NC M Monochrom

The Pier on the top, is in the Outer Banks and is a 4 min exposure using a Leica Elmerit 28mm lens and the creek below is is in the New River Gorge in West Virginia. It is Dunloupe Creek and a 8 second exposure using the AMAZING 50mm Summilux lens. As you can see, the graduations and clarity are simply amazing. The water takes on a distinct Platinum tonality!

Why am I showing you these? Well at the end of the post I will give you a link for 2 videos where a Fuji X100T and a Leica M are compared for street photography and for a discussion on the Leica M B&W. The videos are quite entertaining and shows why sometimes a more expensive camera can be worth the money…

Sometimes!

Dunloupe Creek, New River Gorge WV, M Monochrome

It can be very hard balancing the desire between camera systems and affordability, but sometimes, with SPECIAL cameras the money takes a back seat. I own 3 Leica camera systems, and 1 of them I could have done without (Leica M240), another is an amazing film system (Leica M7) and then there is the M Monochrom. The Monochrom is scary amazing with crazy good B&W output to even consider shooting color then converting. I have NEVER considered the money spent on it to be wasted! In fact, I am considering selling/trading the M 240 but will keep the Monochrom and M7 film body along with most of my Leica and Voigtlander glass.

Glade Creek Grist Mill, Babcock State Park, WV, M Monochrome

For me shooting in B&W is a soul centering event. I take it very seriously and slow. When you consider how working in Monochrome strips away the confusion of color leaving the soul of the image then you can understand why I am looking for the very best way to capture the best possible image.

Shooting in color then converting to B&W works but is a compromise and will only give you a compromise image.
Shooting in film generates a purest form of B&W image and by far is the best way to do it but requires extensive time for setup, capture, development, wet scanning then printing! One roll of 120 film in the 6×7 format will generate 10 images. Processing takes about 45 min then it has to go into a film dryer overnight. Lastly, comes wet mount scanning which can take 1/2 hour per exposure. Now, I do not scan every image, I choose the very best images from the roll (usually 3 or 4) and only scan those. All in all there is about 8 hours of work involved with that single roll! It is a slow process to be sure but very fulfilling and leaves me with a great sense of inner peace.
Now, along came the M Monochrom camera from Leica, a full frame 19 mega pixel sensor with NO COLOR FILTERS over the image wells. This means that there is no anti-aliasing filter, and no brayer array. So effectively you get a 19 x 3 megapixel image (no brayer layer means every pixel well generate a true monochrome data value different from its neighbors!) which is crisp and has film like gradations that are difficult to differentiate from a film negative!

Roanoke Marsh Light, Outer Banks, M Monochrom

Aside from doing all of this in film (which I still work in all of the time) the M Monochrome (or its sisters) is the ONLY GAME IN TOWN! Hence, the cost of the system takes on new meaning since it is such a specialized digital system!

Sometimes I will put the film away and take out the Monochrom system. It is not quite the same as film in the overall process but it certainly is when the finished products are compared!

This is something to consider…

Here are the video links:

Nov 22 2016

Going Home to Mama…. Returning to Film!

The joys of returning to our photographic roots…

Murrells Inlet Fleet, Polaroid Type 55 4×5 film, Wet Mount Scan

Have any of you considered film photography?

There is something about working with film that is very calming which can center one’s soul allowing you to really connect with your art. For me it was like going home to Mama. The feeling of working with your hands as part of creating your art will make it more involved and enable you to to really influence the hidden nuances in your work. It will add a bit more complexity to your workflow but trust me it is worth the effort. The single largest change is forcing you to slow down in your creative process, it forces you to really consider every part of your workflow. It really is not any more difficult than digital photography, but it is a bit more involved.

Polaroid 900, Tmax 100 4x5 @ 64, Perceptol

Polaroid 900 with a Fujinon 150mm lens, Tmax 100 4×5 @ 64, Perceptol 1:1 developing

Take a really close look at the details in this image, click on it and look at it in the full screen mode. Look at the GEARING on the edge of the wheel. The detail there will take your breath away!

Film Cameras

Olympus XA 135mm

I have way too many film cameras to list them all, some really small like the Olympus XA which is the worlds smallest 35mm rangefinder and a joy to use.

I also have an Olympus RC 35 camera that is another fixed lens rangefinder. It is simple and fun to use and can be found for very little money. I have mine rebuild and given a bright blue suite that suites it quite well!

My Custom Olympus 35 RC

My Leica M7 Film Body

My last 35mm camera system is a Leica M7 system. It has interchangeable lenses and is one of the best built camera systems that I have. Couple it with the world class Leica lenses and you have an unbeatable 35mm system.

Confusion, Petri 7S 35mm, Eastman XX flim

Fuji GF670

Moving up to Medium Format 120 film systems I have three. I have the Voigtlander Bessa IIIw system that is 6×7 format and the Fuji GF670 camera (also sold under the name of Bessa III) with a longer 85mm lens (left & right). The 670 is my medium format travel camera of choice. Not only is it a functional camera with a built in meter but it is attractive and it always will draw a crowd when I get it out to use! Another nice point to the GF670 is that it folds down on itself to a thin easy to store camera in your bag!

Mamaya RZ Pro II system

And lastly the Mamaya RZ Pro II SLR ( Right) with interchangeable lenses and a world class metering system. This camera is large and heavy but easy to use and a very powerful camera system! I have a f/4 65mm and f/4 180mm lens for it. I also have both the waist level finder and a metering prism with spot and matrix! Like I said, heavy and big, but I use it for ultra long exposures on the coast with the Fuji Acros 100 film which has almost NO RECIPROCITY failure up to 140 seconds then only 1/2 stop after that! The film base is a little on the thin side but still my film of choice for long exposures.

Stormy Seas, Fuji GF670, Tmax 100, Perceptol 1:1, Wet Mount Scan

Polaroid 110 with 90mm lens converted to 4×5!

My 900 converted to 4x5 by Alpenhause Kamera Werke

Polaroid 900with 150mm Fujinon lens converted to 4×5

Moving up to 4×5 Large Format cameras, I have three. first I have a Shen Hao cherry field camera. Functional as it is beautiful. I rarely take it out, rather I am using a Polaroid 900 converted to 4×5 with a Fujinon 150mm lens and a Polaroid 110B camera converted to 4×5 with a Schneider Super Angulon 90mm lens. It is a beauty and very wide!

Yes, as you may have noticed, some of these cameras are quite large. This is due to the negative size. Let me give you some idea as to why digital cameras can never come close to the resolution of film.

Focus Test - Epson Wet Adapter Across 100 Perceptol 1:2 Springmaid Pi

Montreat Cascades, 4×5 Tmax 100 developed in Perceptol and wet mount scanned.

Lets start with medium format:

Medium Format 6×7 format makes an image 2 1/4 inches tall and much wider. Scanned at native resolution of 6400 dpi on an Epson 850 Pro scanner gives me a file resolution of 16452 x 19668 dpi or a print size at 300 dpi of 4.5 feet by 5.3 feet! This is huge.
Large Format of 4″ x 5 ” scanned at 6400 dpi (native) gives a file size of 29107 x 36070 dpi or a print size of 8 feet x 10 feet! There is not a digital camera system in the world that can come more than a small fraction of this!

Film

Film has turned wildly popular again in the past several years and many of the big film manufacturers have started increasing their film production lines again. This is especially true in the medium format lines (120) and 4×5 large format films! Film can be found in single rolls or in bulk almost everywhere again. The big box companies like B&H, Adorama and many others carry almost every type and format that you could ever want!

Processing in B&W has never been easier at home with eco friendly chemistry with no darkroom needed. Only an initial outlay of around $150 will get you started. Cameras can be found anywhere for next to nothing! You will need:

Dark Bag, a cloth bag that it light proof with arm sleeves that enable you to put your film, developing tank, reel an lid inside with your arms to move the film into a light tight developing tank!
Developing Tank, I recommend a stainless steel version.
Film Reels, I like the Hewes stainless steel ones.
Developer, comes either in a powder or a Liquid. I like Perceptol and/or Rodinal R09.
Fixer, to remove un-used silver
Liquid wetting agent to prevent drops to dry on your negative.
Clips to hang you film up to dry!

You can scan your film into your computer with a good Epson scanner like the 700, 750, 800 or 850. You can also buy an adapter for your camera allowing you to scan by photograph!

While I work in both color and B&W, digital and film I find time after time I pick up a film system and load it up with a good B&W film. The process of developing your film can really help you connect to your work as well.

I like several films, here they are in order of favor:

Kodak Tmax 100 in 35, 120 and 4×5, very small grain, good dynamic range easy to process
Fuji Acros 100 in 35, 120 and 4×5, very small grain, good dynamic range NO RECIPROCITY FAILURE, easy to process
Rollei IR400 in 35, 120 and 4×5, Infrared or normal B&W, good dynamic range, easy to process
Rollei Retro 80S in 35 and 120, amazing clarity and sharpness, good dynamic range easy to process
Eastman XX in 35, motion picture film used in B&W movies of the 50’s, smooth gradient transitions.

As an example here is the top image from last week of the fishing fleet taken on 20 year out of date Polaroid Type 55 monochrome instant film. The camera is also a Polaroid 900 that my daughter sent me years ago from a garage sale that I had converted to 4×5 with a Fujinon 150mm lens. A MOST beautiful camera in a bright new blue suite that is just fun to use. It is both rangefinder and ground glass focusing that forces you to slow down and really consider each and every image you capture!

The Type 55 film, even outdated, works flawlessly and generates amazing images where the edge markings add to the artistic impact of your subject

Pelican Dock - Type 55 4x5 Film, Wet Scan

Pelican Dock – Type 55 4×5 Film, Wet Scan

So what do you think? Are you tempted to try this out? It is easy. For starters, you can look at the continuing education departments at a local college or hight school. Most offer B&W film photography with darkroom work. This will teach you enough to allow you to determine if you would like to further investigate this wonderful medium!

You can also contact me and request info on one of my film workshops held in Pawleys Island SC. I would love to have you and share this amazing link to our past!

Please let me know what you think of this post!

Sep 3 2016

My Thoughts on the Art of travel photography…

Or… What I Did On My Summer Vacation!

Warning, LONG post…

Canyon Lands Pano, Sony A7rii with the 24-240 and polarizer

Devils Tower

Travel Photography… Say it, let it roll off your tongue, think about it! I bet that the first thing that comes to mind are images from National Geographic, fine, super saturated color photographs that could take you anywhere in the world by simply looking at them! You know the kind, they enabled you over the years to travel vicarisly around the world just with the magazine and its images!

But is that what travel photography really is?

What is the intent of travel photography to document a place or a trip? Is it designed to tell a story on an individual level or to the masses?

Well for me, it is a combination of the two. Most importantly, the images are to refresh the memories of the trip. But there is a real market out there for well done travel photography whether in print publications, web, advertising or fine art prints. It can be quite profitable if you work at it and can step back and look at your own images in terms of the above markets. Even the housing deceration market has room for this type of photography provided that you can simplify your work to show colors and contrasts over locations.

Jordan, My 7 year old photographer grandson

For this trip, and pretty much all the time when I am shooting digital, I exclusively use the Sony 42 mpix A7rii camera system and the new Sony A6300 for high speed work with Sony G lenses or Sony Zeiss lenses. They are very well suited to this type of photography and give you enough (42 mix) resolution to get amazing images yet still have room to crop!

The drive for this post was a recent two week trip out West with my wife and 7 year old grandson Jordan who I am teaching film photography and darkroom processing to (photographically, I had grand plans for him this trip). Given time I plan on turning him into a photographic GOD for something fun while making sure he is a Rocket Scientist!

We flew into Rapid City, SD and picked up a one way rental car and our first night in a long string of hotels.

Devils Tower

Our Itinerary:

Prairie Dog

Day 1. Rapid City layover and rest.
Day 2. Pick up rental car and drive to Mt. Rushmore in the morning and then the Devils Tower in the afternoon. Continue on 1/2 way to Codie, WY.
Day 3. Famous Hot Springs of Thermopolis, Wyoming then an afternoon visit and guided tour to the most successful dinosaur dig on our continent.
Day 4. Codie WY for several stops including the famous old west town and the Codie Rodio.
Day 5-7. Yellowstone for 3 days in a park lodge.
Day 8. Leave Yellowstone, drive thru and stop along the way in the Tetons finishing in Jackson WY.
Day 9. Drive just north of Salt Lake City in the town of Herbor for a 3 hour train ride around the valley.
Day 10-12. Drive to Moab for 3 nights and visit Arches and Canyonlands National Parks with extra boat and jeep rides thru the park as well as Dead Horse Point State Park.
Day 13. Early morning drive to Bryce National park for 2 days of Bryce National Par
Day 14. Drive to Salt Lake for flight home on day 15.

Drugstore of the West, Cody, WY

So as you can see there was a well thought out family plan for travel and location visits! But, I also had a plan, my photographic plan!

So lets talk first about my TRAVEL photographic equipment plan. I wanted to travel light (yea right). No backpack, rather a small rolling camera case that would fit into the over head of a small commuter plane so that I would not have to check it. I would not have room for a film camera… Dang!

So here is what I brought along:

Sony A7rii camera body
Sony a6300 camera body for Jordan
Sony 24-240mm one lens does it all for Jordan
Sony 24-70 Zeiss f/4
Sony 70-200 G f/4
Tamron 150-600 for those exotic animals I expected to see
And yes… A Olympus XA 35mm film camera (but it is the worlds smallest rangefinder) with 6 rolls of Tmax 100
Filters, ND for long water falls and polarizers for all of the rest in 67mm and 72mm.
Batteries an chargers (both cameras used the same)

This was a good plan (or so I thought) until our very first stop at Mt. Rushmore where Jordan informed me that the 24-240 was too long and heavy. Oh well, I took that and gave him the 24-70.

RULE ONE: No camera plan survives first contact with a 7 year old!

Ok, so at least the part of the photographic plan of me being able to NOT check my camera equipment worked! (I did put all of my insulin and supplies in the camera case just to prove my need to have the case with me but did not need it).

RULE TWO: A super zoom really works best when you have to carry lots of glass around while traveling. See Rule One, Jordan did me a favor here!

Yes, I know that one would not normally trade a light 24-70 Sony/Zeiss f/4 lens for a 24-240 f/3.5-5.6 Sony super zoom but I have to be honest, I was VERY impressed with the super zoom! It was not really that much heaver but it was longer. I NEVER put on the 24-70 after that.

Things to look for on a cross country western trip:

Wildlife
Landscapes & Vistas
Unique rock formations
Waterfalls
Wild colors
Unique photographic visions

Trip Highlights!

Yellowstone

Old Faithful

Querimony: To Questionably Moan & Complain!

I expected great things of Yellowstone and that showed in the number of days there as well as staying in the park. Yellowstone is HUGE, so much so that you have to allow for HOURS of driving time from location to location. The roads are all good, 2 lanes with adequate pull offs. BUT having said that there are rules of behavior in pulling off and rules for how you treat the wildlife. I cannot tell you how many people (especially foreign visitors) who would jump out of the car (still in the road) and run off into the fields right up to the wildlife. To say that this is bad behavior is an understatement. It for one, keeps others from being able to photograph the wildlife and two puts the peoples lives in grave danger that approach the wildlife! Yet this happened almost every time wildlife was near the road. The park rangers had simply given up on trying to educate people who would not listen. They spend most of their time dealing with the MANY dreadful traffic accidents that happened every day. The traffic jams were terrible whenever an animal was near. Sometimes this was due to the animal being on the road but most of the time it was because people parked right in the middle of the road who left their cars.

Buffalo on the Yellowstone river in the early morning mist

I am going to share a few of my favorite images from Yellowstone with you. It is a good cross section of what you can expect to see while visiting!

Blue Pool, Prismatic Spring Upper Yellowstone

Prismatic Spring upper Yellowstone

Yellowstone Antelope, North Entrance

Teal Pool, Upper Yellowstone

And last….

Lower Yellowstone Falls Detail 1 second Exposure with 10 stops of ND

I would travel again to Yellowstone but in the spring or fall in order to see more of the wildlife there. I realize that in the heat of August even the animals would move to higher locations in order to reduce the heat. The only wildlife I really saw in abundance on this trip were Buffalo, Elk and Antelope.

Moab, Arches & Canyonlands National Parks

Delicate Arch

The Moab area offered some of the most amazing locations of our trip. I had thought that nothing could beat Yellowstone, but Moab came very close.

Sandstone Arch, Arches

There are 3 offerings here, the Arches National Park, Canyonlands National Park and the Dead Horse Point State Park. ALL three are must see locations. For me Arches was the best, but honestly, we spent time exploring all three in detail (well sort walk detail). We also paid extra for a boat trip on the Colorado River thru Canyonlands for a low view and a back country jeep tour to see area and arches not available to the general public in Arches! If you get here I advise that you do both side trips.

Courthouse Rock, Arches

Whale Tail Arch, Backcountry Tour

Windows Arch on the Back Country Tour, Arches

Dead Horse Point. Look at the lower left corner 1/3 up to see the dead horse outline.

Canyon Lands, Isle in the sky

General Utah

High Desart Train Pano

So…. I had this vision stuck in my head of a parked line of freight train box cars parked in the high desert with a mesa behind them. I found myself looking to the sides of the car as we traveled endless miles through Wyoming and Utah. Finally my wife asked me what I was looking for and when I told her she made a point to help me look and stop me when we came upon them. I know that out West there are ultra long stretched of road. Most are 4 lanes with lots of traffic. If you see that special scene make sure that you safely stop so as not to irritate the 7 year old in the back seat, pull safely off to the side of the road as you watch for the perfect compositional setup and get out and shoot it! DO IT!

Because…

RULE THREE: There are NO GO BACKS! If you see a subject or scene on the side of the road immediately stop and shoot it!

Bryce National Park

Whodos in Bryce Canyon

To say that Bryce National Park is anything less that amazing is an understatement. It was right up there with Arches and Yellowstone in amazing views, colors and the wow factor! This is the location that I would choose to visit again to try some different styles of photography. The colors of the Hodoos are simply amazing and full of wild colors and contrasts.

Natural Bridge Bryce

RULE FOUR: Revisit those scenes and compositions as many times a possible!

While in Arches, my 7 year old grandson decided that he had enough nature and vistas after driving Arches all day long. I took them (at my wife insistence) back to the hotel and went back out to Arches and drove it again in different light conditions and the 2nd time there were clouds in the sky. This made for much better images that I would not have gotten if I did not go back out again!

Final thoughts on what makes travel photography great!

Now as you have seen here, I presented this trip as a travel log. Attempting to document the many wonders of the high plains in the west. For images that have the possibility of selling you need to:

Pay more attention to your editing, scene selection and composition.
You must re-visit local scenes several times in order to get the best light and clouds.
You MUST shoot with your best equipment in order to produce high resolution images for future publication.
In your post processing you must choose only your best images and throw the non used images out.
Be your WORST critique and select only what you would consider to be world class images. Case in point, the image above of the Court House Rocks in Arches. Yes it is a nice image but the lack of clouds in the sky reduce its impact to the point of it being a weak image!

Hood Valley, Bryce Canyon, Sunset overview.

This type of travel photography is more difficult that personal travel images traditionally done by the millions of photographers who roam the country. These types of images are still travel photography but basically serve to show and remember your great trips! They will include more family member in the scenes, less care about the total compositional elements because those are simply not as important to the memory of the trip and locations! They are just as important, but will not generally generate income from sales and publication.

Colophon: Very Important Lessons Learned:

NEVER, and I do mean NEVER plan a 14 day photographic trip with a 7 year old and expect him to be excited beyond the first week. I would have been better off leaving the A6300 and 24-70 f/4 at home thus lightening my load and giving him MY camera when he desired to take a photograph!
Make SURE that you explain to the said 7 year old that “NO! There are places that not only will there be no TV but also no internet! (I was able to get around this most of the time with my iPhone as a hot spot for his iPad!)
Build in several fun days (as viewed by a 7 year old) that includes things like movies, water parks and so on! This is a small price to pay for 7 year old mental health and will refresh his young mind and keep it open for those wonderful scenes you travel to!
How can you get those great travel shots when your walking is limited? As a cranky 63 year old man, make sure that you plan photographic stops THAT YOU CAN DRIVE TO! We (actually my thoughtful wife) did this ahead of time thus insuring my mental health and happiness at the stops we made!
Take the time to occasionally stop at nice restaurants that actually serve wine and beer (this will assist with the mental healty of said wife!) Happy marriages are NOT built and fast food places in a rush!
If you desire to shoot medium format film, you damn well better plan on space for the camera and film! Regrets upon your return will leave a sour taste in your mouth!
Be flexible, very flexible. This will leave you happy in the hotel at night!
Take your pain drugs! (See #7)
If you see a photo subject on the side of the road STOP! There are no go backs! (see RULE THREE about this very thing and really your wife know this and will support your urges to stop in the middle of nowhere!
Wildlife… What wildlife? How did I miss all the great shots of wolves, coyotes, and bears? I was in Yellowstone for heavens sake! The lesson here is to make sure you check the season for high animal activity. I have listened to my photographer Son talk about so much wildlife in Yellowstone that it was not safe to drive! I guess he should have mentioned when he was there! Oh well. I AM happy with what I actually did see (Buffalo, Antelopes, Elk and Prairie Dogs)
Stop at EVERY overlook in every park. You will be happier having done so (and vicariously so will your wife). You will hate yourself when you return home only to have a photographer friend tell you that the one overlook you skipped was the only one you should have stopped at!
If you find a scene that is magical for you revisit at a different time of day. This is VERY IMPORTANT and promote photographic health for those who have heeded these magic words.
Would I do it all over again with a 7 year old? YOU BET!! But I would plan differently. If I take any of my grandkids I need to remember that it is their vacation as well. This means that you build in days doing fun stuff for their age also!

Please let me know what you think of this long post! I welcome all feedback.

Bryce Canyon in camera pano

Apr 16 2016

Advanced Work With The Sony A7rii

Using the Sony A7rii for advanced photographic work….

Long Exposure In Charleston, SC, 30 seconds with a 6 stop B+W ND

I was in Charleston, SC last weekend with the a7rii camera system to see how far I could push it! I find the Sony system to be refreshingly powerful and very capable of any style of photography I desire to shoot. The Image above of the boat house (Sunrise) was just another example of the power of this system. I was looking for some long exposure and the water of Charleston Harbor was very smooth to start, with only 6 to 12 inch waves. The sunrise was blocked by a tremendous super cell thunderstorm system so I just concentrated on the boathouse and smoothing out the water. I was using the Sony FE 70-200mm F4 G OSS lens at 150mm with a 6 stop B+W ND filter attached which was giving a 30 second exposure. I was sure that 30 seconds would give me a very smooth water (which it did). I also desired to capture detail in the stormy clouds but keep the white water. I metered the waters surface and placed it in Zone 7.5 (what! You do not know the zone system? Shame…. We will have to fix this!). This at ISO 50 and f/16 gave me a 30 second exposure and allowed the 14 stop dynamic range of the camera to capture both the withe of the water as well as cloud details!

Granted, the Sony has a LARGE menu system but the provide you so many programmable custom buttons AND several system setup memories that you can with the turn of a control knob chance the camera functions over to the specific style of shooting you desire! In my case, I have the M2 memory setup for long exposures, and by simply turning the command dial to M2 the camera is ready for long exposures!

Miss Lulu, Georgetown, SC

Here is another example of the amazing capture ability of the Sony. This is the shrimper Miss Lulu on the dock in Georgetown, SC last Monday morning. The water of the bay was at slack tide, super high and mirror smooth. I decided that for this image I wanted B&W but still captured it in color since a color starting image gives the best B&W conversion. I was using the Sony/Zeiss FE 24-70mm F4 ZA OSS lens at ISO 100 at f/8 with a shutter speed of 1/320 second. I waited till a Pelican flew into the scene from behind the boat for the capture. The clouds were slight but still stunning but the boat and its reflection really made the image.

As I said, During my pre-visualitlation of this image I decides upon monochrom with a flying bird. I setup the boa further into the image space to allow for a bird to fly into the scene and balancing the overall image with the boat centered with the trees on the right. This is not a simple snap shot, a lot of thought went into its setup!

Shrimp Boats are one of my favorite subjects and each and every time I happen by them they always present something new and different!

Mar 16 2015

The Purity Of B&W

Going Home To Momma…

Don’t you have the feeling sometimes of not reaching that creative high so that when you return home you are almost like an empty husk?

Well me too, and sometimes I really need to stretch my artistic legs. Going out with a Color Camera will just not get the job done and leaves me feeling empty. Working in Film is a lot better and scratches an itch that I just cannot reach otherwise… But when I am really feeling creatively down and mentally cramped I usually turn to my Leica M Monochrom system.

Duggars Creek Falls, Boone, NC. Leica M Monochrome

Working directly in B&W is a soul expanding exercise that will re-inflate my creative side quickly and effectively. I am the type of photographer who can actually think and see in B&W. Actually generating those images in the field with a capable B&W rangefinder system really is like going home to Momma. It leaves me with that ohhhh feeling, or is it OHHHHH… Yep, that is the feeling that I am talking about!

First, I LOVE shooting with a rangefinder camera system. ALL of my cameras are rangefinders except for one little Fuji XT1 that sits in my camera bag rarely used unless I take it out for lightning shots. I just love the feeling of using a rangefinder! I am not kidding about the feeling of going home to momma! They take me back to my early days of photography when a rangefinder was all that I had and used. They were and still are a nitch camera system. You generally will not find someone out shooting birds in flight images with one, but that is OK with me because after 50 years of shooting, I am soooo TIRED OF BIRDS (well except for hummingbirds but I can do those just fine with a rangefinder).

Outer Banks Fishing Pier, 250 second Exposure Leica M Monochrom

So what makes me smile about the M Monochrom? The ease of use, the CRISP release of the shutter, the incredible functionality of the camera and its wide dynamic range! I love the way it feels in my hands and responds to my control! I even love the sound of it. It is almost sensual in nature! Now, couple that with the amazing images that a pure B&W 18 mega pixel sensor with NO Brayer filter and no anti-aliasing filter can create you will be left breathless with the results.

So for this simple and short post about achieving emotional nirvana, I will keep it to just 2 images that make me feel good. Now that I am creatively re-inspired I can go out again with my color camera (rangefinder of course) and while looking at my scenes in B&W create color images again!

Thank you for stopping by for a visit to the blog…

Jan 25 2015

Continued Work In Van Dyke Brown Alternative Print Process!

Perfection in Brown…

Glade Creek Mill, Van Dyke Brown, Revere Platinum Paper exposed for 5 Min

Oak Reflections in Infrared, Van Dyke Brown, Revere Platinum Paper, 3 Min Exposure

After another 2 weeks working on the negative density, I have finally gotten to the point of good negatives, not great yet but I will get there. I have to master the use of UV blocking color in the negative for them to be perfect and that is a project for the future. To date though I have reached perfection using normal B&W negatives.

My CORRECTED Digital Negative for the Van Dyke Process

Here is the corrected negative that I used in the image of the Oak trees above. It is much dense and has been corrected for the mid tones as printed in the Van Dyke Brown Process! It has much greater contrast and required only a 3 min exposure in my UV unit.

One thing that you have to remember when making your UV exposures is to place the ink side of your negative down on the paper surface. If you reverse this the picture will be backwards, but more importantly, the UV light will burn the ink surface and ruin both the negative and the print.

B&W Negative for Van Dyke Brown Print exposure calculated for 3 Min.

Compare it to the negative on the right. This negative was used in the previous post here where the image printed much darker and with less mid tone data. Take a close look at the difference between the two negatives, the first has much brighter areas for increased black contrast and more detail in the trees. The difference is amazing and was easily achieved by the process discussed below…

Here is a small copy of the print generated by the 2nd negative from the previous post. Notice how much darker it is and that there is no detail in the mid tones of the image! It only took me a short while to create the Gradient Map from the process that I learned in Peter Mrhar’s book below.

Van Dyke Brown Print, Over Exposed by 2 stops due to the uncorrected negative

Easy Digital Negatives is another remarkable book by Peter Mrhar

Easy Digital Negatives is another remarkable book by Peter Mrhar that I use in the creation of my negatives. It enables you to easily create Gradient Maps to adjust the mid tone values of your negative tailored to the alternative process that you are printing with! I highly recommend this text over all of the others!

There are several good books on Digital Negatives out there but As I said the is the easiest that I have read and used plus the results of using a Gradient Map over a Custom Curve. I suggest that you purchase several texts and try them in your workflow to see what works best for you!

I hope that you enjoyed this short post on the Van Dyke Brown Process. You can look for more about it in the future!

Jan 19 2015

Van Dyke Brown Printing, 1842

A new (read OLD) way of printing!

8×12″ Van Dyke Brown Print

Alternative Printing from History!

Van Dyke Brown is an early photographic printing process. The process was so named due to the similarity of the print color to that of a brown oil paint named for Flemish painter Anthony van Dyck.

The Vandyke brown print is based on the first iron-silver process, the argentotype, invented in 1842 by the English astronomer, Sir John Herschel. Both processes utilize the action of light on ferric salts and their chemistry is very similar. The Vandyke process gets its name from its similarity in color to the deep brown pigment used by the Flemish painter Van Dyck. Vandyke brown prints are very simple and economical to make, with the sensitizer consisting of three readily available chemicals. Clearing is carried out in water and fixing is done in a weak solution of hypo.

Van Dyke Brown Step Wedge Calibration Chart for 3 Min Exposure

As you can see, this is a very early way of printing developed a long time before our current Silver Salt paper process. The images are a deep brown instead of the normal black and white that we are used to seeing. They are somewhat easy to create provided that you have done your homework and created the proper calibration images to create a calibration Gradient Map or Curve to apply to your negatives which adjust them for loss of mid tones in the printing process.

This is strictly a CONTACT PRINTING technique that requires a true negative that is placed on top of paper that YOU as the artist coat yourself with the Van Dyke Brown emulsion that you mix from simple chemistry! The coating process is done with a special brush that requires a very light touch or a glass coating rod that you use to push a line of liquid emulsion across the paper.

B&W Negative for Van Dyke Brown Print exposure calculated for 3 Min with the calibration applied.

The liquid emulsion is measured by the number of drops from a glass eye dropper into a small glass then with a drop of two of a wetting agent like Tween 20 to help the coating process. The paper/emulsion is allowed to dry then the negative which was created using my Epson 7900 printing on transparency material is placed on top of the coated paper. This sandwich is then placed in a printing box filled with 12 Fluorescent Black Light tubes which then expose the paper with UV light. The exposure for the current paper I am using (Revere Platinum) has been calibrated to 3 or 4 min based upon the test chart above.

Van Dyke Brown Print, Over Exposed by 2 stops.

Van Dyke Brown Print, Over Exposed by 1.5 stops.

This process is a POP process in which the image after being exposed can be seen on the paper once removed from the UV box. It is orange and yellow in color. It is placed in 2 consecutive distilled water baths that remove the yellow and darken the orange. Then it is placed in the fixer solution (Sodium thiosulfate) for 2 min. When the image is placed in the fix, it IMMEDIATELY changes from orange to a very dark brown and white picture. Finally the print is placed in a live water wash for 30 min then dried!

This is a simple process that creates beautiful images that will leave you breathless as you view them! I am going to further develop and learn the process over the next month or two before I start on mastering the Platinum/Palladium printing process as well!

Look forward to many more posts on the processes as I master them!

Jan 6 2015

More Leica M Monochrome Magic!

Creating World Class B&W Images With Leica Monochrome

Bodie Island Light, M Monochrome

In my continuing love affair with the Leica M Monochrome camera system I have learned more each day towards creating amazing etherial B&W art… Keep in mind that I have been shooting B&W film (35mm, 6×7 and 4×5) for several decades and know and understand the process very well. But using the Monochrome is such an easy progression that it seams as though the camera is leading me down this path on its own. Yes there is some small post processing to be done using Nik Filters Silver EFX and once in a while I will add some Viveza as well, but for the most part it is almost perfect out of the camera as long as you get the exposure correct in the shooting!

Leica Tri-Elmar 16 – 18 – 21 mm Lens

In the image below of the shrimper Stormy Seas, I used the Leica Tri-Elmar set in 16mm. There is no image distortion from such a wide angle and it is sharp with good depth of field. When using this lens on the Monochrome you are forced to use the frankenstein viewfinder that you purchase with the lens but that is a small price to pay for such a useful lens. I also have a Voigtlander Hellar 12mm lens in the camera bag and it works very well on the Monochrome and uses an external 12mm viewfinder, but it does distort the image slightly due it its wideness but you can correct for that in Photoshop. The thing about the Tri-Elmar is that it replaced 3 separate lenses that were stolen with one small lens!

Stormy Seas Shrimper, M Monochrome with Tri-Elmar at 16mm

Using a fast lens like the 50mm Summilux ASPH for the image below of the Roanoke River Lighthouse allows you to hand hold on dark or stormy days and still get crisp images that jump out at you! For this image I also had a yellow filter attached to bring out the structure of the clouds. This is one of the HUGE pluses of the Monochrome in that it reacts to the standard B&W filters the same way as film does!

Roanoke River Lighthouse, M Monochrom

But as always my main use for the camera is long exposures which is where my true love lives! Being able to take ocean shots and smooth out the waves is exciting beyond words and the Monochrome does a great job of it with its 4 min bulb limit. Look at the image below of the (another version) Roanoke Marshes Light House. I was there when the light was on and each time it circled it created another slightly offset star effect. It allows me to create images full of wonder and depth!

Roanoke Marshes Lighthouse with operating Light, 16 second exposure, M Monochrome

The implied stillness of the water with the graduated reflections create an image full of mood and depth. This is one of my favorite images of this Light House and the fact that during the 16 second exposure the light revolved around 3 times to generate 3 slightly offset star patterns just add more mood to it. This particular shot was done with a B+W 103 3 stop ND filter to allow the longer shutter speed at f/8 for sharpness with the 50mm Summilux ASPH lens!

Now let me share a detail shot of a fishing boat just up the island from the Light House. It is simple yet tells a complex story of the boat and job.

Fishing Float, M Monochrome

I love the textures of the image and the sharpness. The texture on the surface of the individual floats are great and perhaps would have been better served by a closer shot. It was taken with the Macro Elmar 90mm lens (a great lens to invest in) and was done on the tripod!

Mushroom, Macro, M Monochrome with Macro Elmar 90mm plus macro adapter

Really Right Stuff TF-01 and Ball Head

Continuing with the 90mm Macro Elmar I give you a closeup image taken just as I left the Outer Banks. This mushroom is only about 2 inches tall and I had to lay down under a log to get it. Yes a tripod was used but it was the Really Right Stuff table pod which is an amazing tool to have in your kit for just this sort of work Look at the textures on the bottom and stalk of the mushroom. This 90mm lens is the only 90 that I will ever buy for my Leica cameras!

Really Right Stuff TF-01

I hope that you enjoyed this last dedicated post on the Leica M Monochrome camera. I will have many more images to share from it in the future but I think that you are likely getting tired of dedicated posts!

Thanks for taking the time to view these!!

Jan 3 2015

Leica M Monochrome Magic….

A new camera come homes to live!

Leica M Monochrome

About a month ago, my truck was broken into and a camera bag was stolen with several Leica lenses, cameras and accessories. After the insurance was paid, I purchased the amazing Leica M Monochrome and the Tri-Elmar 16 – 18 – 21 mm lens to replace 3 missing lenses and 1 camera.

The M Monochrome is truly an amazing camera and the images are beyond stunning! I have found that I actually enjoy using it more that the M 240. So far, I have used it for ultra long exposures in the Outer Banks, family pictures of my grand children during Christmas and on a just completed trip to Boone, NC for the New Year. I am NOT going to do a review here rather I will just show the capabilities of this camera system while photographing my favorite subject matter!

Duggars Creek Falls, Linville, NC 32 second exposure, 6 stops of ND

Leica Macro-Elmar-M 90mm f/4

The water fall image above was taken on 1 Jan 2015 at Duggars Creek Falls in the parking lot of the Linville Falls visitor center where I sat on a bridge centered over the stream (I cannot get down to the water level due to a recent operation which limited me to just basic views). Notice the sharpness of the image and the tonality of the rocks drawing the viewer into the scene. There was very little post processing on this image which shows the real power of the Monochrome! For this shot I used the Leica Macro-Elmar-M 90mm f/4 lens which is an amazingly tiny yet sharp lens! This image simply takes my breath away with it sharpness, tonality and the way it draws the viewer into the image. This is one of my planned images for a Platinum/Palladium print in a few weeks!

This camera is going to be the cornerstone of a old (new for me) printing process where I will be making LARGE contact negatives on an Epson 7900 printer to use in the making of chemical based Platinum/Palladium metallic prints exposed with a high intensity UV lamp set and chemically developed. All of the images are B&W so the high resolution images generated with the Monochrome will work perfectly with this printing process.

When used with a high quality ND filter set from B+W the most amazing Long Exposures are possible and this camera simply delivers!

The set of ND filters that I keep in my kit for in sizes for each of my Leica lenses from B+W are:

103 – 3 stop ND
106 – 6 stop ND
110 – 10 stop ND

Outer Banks Fishing Pier, 250 second Exposure

Here is an example taken on the Outer Banks of North Carolina prior to sunrise with 6 stops of ND filter and a 250 second exposure! I used the 50mm Summilux ASPH lens for this image. Look at the tones and graduations of the grays. Simply amazing…

Roanoke Marshes Light, 8 second exposure

Another example is this image of the Roanoke Marshes Lighthouse taken about a month ago at sunrise. The detail in the clouds and water prove the ultra wide dynamic range that this camera is capable of!

Jordan, my grandson on his new Christmas drum set taken with the Monochrome and the Leica SF 58

Leica SF 58 Flash

For people, I have been coupling the M Monochrome with the Leica SF 58 flash which is simply a pleasure to use and is fully integrated with the M electronics! The camera and flash are so well functionally balanced that it will blow your mind when you pick them up to shoot! Audio indications from the flash for performance and a dual flash head that allows a straight on light plus a bounced light!

As you can see from the image of Jordan, it is exceptionally well balanced and the tonality is perfect yet there is no overt indication of flash in use!

I have used a Sekonic DR750 spot meter along with special software and target to measure the dynamic range of this camera when shooting in RAW (DNG) and get 11 to 13 stops dependent upon the ISO setting being used. Who says that paying big dollars for a camera system doesn’t guarantee big performance!

The system simply amazes me…..

If you have any comments or questions on this post please send me some feedback and I will answer to the best of my ability!

Outer Banks Fishing Pier, 250 second exposure. Note the moving clouds!

Jul 7 2014

Fuji X100s 830nm Infrared and Long Exposures

It just keeps getting better….

Pawleys Pier, 830nm 300 seconds, f/16, ISO 200, 8 stops of ND with the 10 stop B+W 110 ND filter

Normally you do not see much in the way of Long Exposure photography in the Infrared world. The reason is that it is necessary to use Neutral Density filters (ND) to cut down the amount of light reaching the sensor to enable very long shutter speeds. The infrared spectrum will reduce the the effective value of any ND filter that you attach to your lens from between 20% to 30%. Have you ever taken a photograph of a person wearing a pair of sunglasses in infrared and noticed that they are totally clear? This is the effect that I am talking about. The general rule is that the cheaper filters suffer much greater loss in infrared and the variable ND filters do not work well at all (yes, even the expensive Singh Ray).

B+W 110 10 Stop ND

Should you desire to pursue this style of photography I strongly suggest that you purchase and use B+W ND filters which loose around 20%. I am also told that Lee filters do not loose too much effect as well but I have not yet tested them even though I own them all.

The B+W ND filters display the ND values on the side of the ring, but the easiest way to understand them is to simply look at the 3 digit number.

110 equals 10 stops
106 equals 6 stops
103 equals 3 stops
102 equals 2 stops
101 equals 1 stop

Fuji X100s

I am using the Fuji X100s for the images in this post. It is a 16 mpix camera that is a rangefinder styled system. I includes an internal, drop down 3 stop nd filter that actually gives about 2 stops of reduction when used in the infrared spectrum. I had the camera recently converted via Kolari Vision, http://www.kolarivision.com to what they call the Dual Spectrum conversion. This is where the internal UV/IR blocking filter is removed and a strong UV filter is put in its place. This gives you the same capabilities as any Full Spectrum conversion except that it will not work with any IR or UV filter that combines multiple spectrums that include UV. This means that the 047b in camera Faux Color or Super Blue filter and the UG1 UV/IR dual band filter will Not work. All of the others work fine from 590nm up!

Plus you can convert the camera back to normal visible color with the addition of a filter on the lens to block UV and IR. With the Full Spectrum filter you need to stack the B+W 486 reflective UV/IR blocking filter with the LDP http://maxmax.com CC1 absorption filter. With the Dual Spectrum conversion you need only add the B+W 486!

So, I have ALL of the normal IR filters sized for 49mm which is what the X100s uses including the B+W 486. I am using the B+W 093 820nm IR filter for this camera almost 100% of the time though.

Another nice thing about the X100s is the fact that it has aperture priority mode with a shutter speed up to 30 seconds and a BULB MODE that goes up to 60 minutes! Where the X100 really excels is the fact that is gives a count up timer in the viewfinder or on the back LCD panel for timing your bulb exposure!

The camera is so small and easy to handle that it is a pleasure to work with and as you can see, the images are stunningly sharp!

I will be posting more long exposure images here in the future and discussing the various post processing recipes with you. Now, one last image. Here is the same shot with only the 3 stop internal filter engaged in the X100s. The shutter speed at ISO 200 and f/16 was 1/6 second. Not nearly long enough to slow the water down or blur the cloud movement but it would likely work for slowing down the moving water in waterfalls!

Pawleys Pier, 830nm IR, 3 stop internal ND, 1 second, f/16, ISO 200

If any of you all out there shooting in Infrared work in long exposures please drop me a line or comment and we can share data about the various ND failures and successes!

You can also consider signing up for one of my (along with Jamie Davidson) Infrared/Color Workshops. We take you to amazing locations in the South East Coastal area for world class photography and INTENSE post processing classroom training! You will find posts here talking about each workshop as it approaches!

May 3 2014

Going Home to Momma with the Leica M7…. Film Photography Returns!

Ahhh… It Feels So Good!

Spring in the South… Rollei IR400 Film – Leica M7 50mm Lux – Rodinal 1-50

Oh my, I do NOT know where it came from but I got the BUG again for more film photography! I have a cabinet here in the Gallery just full of old film cameras plus a Leica M7 film body that works with ALL OF MY M MOUNT LENSES! (see the last post HERE for more info on the lenses). I decided to purchase a new stock of several films:

Kodak Tri-X 400, Ohh
Eastman Double X 200, Ahh
Rollei IR400 400, WOW!
Kodak Tmax, Ho hum…
Ilford HP5+ 400

Rodinal One Shot

I picked up some stainless 2 roll developing tanks with a bunch of Hewes (don’t skimp on your reels, buy the best!) Stainless Steel 35mm Reels. For developing I like Rodinal One Shot due to its ease of use and a life span of around 40 years. I simply mix it one tank at a time usually at a 1:50 ratio with water using a small syringe. It allows a very wide latitude of contrast and iso control. I have used several other developers but I keep coming back to Rodinal!

Now, I am playing with several cameras. As I said my main and BEST camera is my Leica M7. But here is a current list of those cameras I am using:

Leica M7 with Leica & Voigtlander Lenses
Petri 7s, 1962
Olympus XA
Olympus 35 RC
Shen Hao 4×5 Field Camera (about 12 years old)

1962 Custom Petri 7s Film Body

The Petri 7S has been in my hands since 1962 and still shoots great ( I did send it off to have the light seals replaced and a new leather covering ). The Petri has no batteries but rather a solar cell around the lens that drives a needle exposure meter that you simply place into its center notch for a good image!

All of the cameras in my list above have proven reliable but with the Petri you get a link to the past, specifically MY past as this was my 2nd camera I owed when I was young!

The Olympus 35 RC is an amazing small rangefinder with very nice controls. It is smaller then the Petri 7s and actually has better control functionality. It does require a battery to run its metering system though which is a step down from the Petri 7S in my opinion. The nice thing other than the size is the fact that EVERYTHING is displayed inside of the viewfinder. Unlike a refurbished Petri 7S which can be found for around $100 used on Ebay, the Olympus 35 RC camera refurbished is demanding around $250! This is a big difference in price and tells you a lot about its quality and demand! I was lucky to find one from a collectors inventory that he sent off to be totally refurbished and re-skinned for much less than $200.00! For you film shooters out there on a budget this is the camera that I recommend if you find yourself desiring a rangefinder.

My Custom Olympus 35 RC

The Olympus XA was a 35mm rangefinder camera built by Olympus of Japan. It was one of the smallest rangefinder cameras ever made, together with the Contax T.

Olympus-XA

It was designed by Yoshihisa Maitani who had joined Olympus Optical Co Ltd in 1956. He was the chief camera designer and managing director of Olympus Optical Co Ltd., having developed a number of legendary cameras during his career. These included the Pen series, the OM series, the XA series, the IS series and the [mju:] series of cameras.

The original model, the XA, was sold from 1979 to 1985. The original XA features true rangefinder focusing, a fast 35mm f/2.8 lens, and aperture prioritymetering. The lens was protected by a sliding dust cover.

This is the smallest 35mm rangefinder ever made. It will fit in the palm of my hand and will make a great system to have with me everywhere I go!

The Leica M7 uses batteries and sports a center weighted spot meter measured either off the film or off the shutter. I find that it meters very reliable. It is the top of the heap when it comes to 35mm film cameras. There are a lot of high end rangefinder cameras on the market but the Leica is the top. I really excels in the area of long exposures with either a count down timer in the viewfinder for images metered and controlled in the aperture priority mode or a count up timer for exposures done in the bulb mode. In bulb, it will count up to 16 min then stops counting for battery conservation, but will continue exposing until you release the remote shutter release. It will use NO battery power after the 16 min count up timer turns off until you release the shutter then it requires a pulse of electricity to close the shutter. NO other rangefinder can say this unless you use a pure mechanical camera like a Leica M2 which has no metering system at all.

The Leica M7 is surprisingly heavy but easy to handle. I keep reading about other high end rangefinder bodies out there but when you do the comparison of features I always come back to the M7.

My Leica M7 Film Body

All of my cameras are fun to use and reliable. With the Leica M7 you get the world class glass but with the Petri 7S you get a link to the past, specifically MY past as this was my 2nd camera I owed when I was young! The Olympus 35 RC is an advanced rangefinder from the 1970 era and is slick and fun to shoot. You will see examples from these cameras towards the end of this post!

______________________________________________________

I usually develop my negatives on Sundays. I have a film drying cabinet that I use to dry the film without dust spots overnight. I then will scan the negatives on Monday or Tuesday using a Nikon 4000 ED film scanner at 4000 dpi into the DNG format for editing and cleaning later in the week. I usually shoot 2 or 3 rolls a week.

Rollei IR400 Film

My favorite film is Rollei IR400. This is available at the big camera stores like Digitaltruth, Freestyle and B&H. What makes this film so special is the fact that is very much like Kodak Tri-X 400 as shot. It has a VERY THIN film base which really makes scanning easy. BUT the most amazing thing about this film is that it is sensitive to INFRARED! If you place a Hoya R72 IR filter on the camera lens the film will record 720nm IR images! There is an ISO hit due to the filter being so dark down to 12 ISO but it is worth it being able to shoot in both normal B&W and IR B&W!

Next I like the Kodak Tri-X 400 film. It gives great contrasts and has a very wide latitude in development. It is well known and tested and for ultra long exposures.

Eastman Double X 5222

Then comes Eastman Double X Cinema film. This is a GREAT B&W film that gives a very smooth gradation and lovely warm tonality with slightly increased contrasts. This is motion picture film so unless you are going to buy a 400 foot reel you will need to purchase it from the store at Film Photography Project. They will sell it in either 24 exposure rolls or a 100 foot bulk loader roll. It develops nicely in Rodinal at 1:60 for ISO 200 but there are ratios for 100 up to 800 ISO! This film is very much worth experimenting with.

I need to say a few words about the folks at Film Photography Project. They offer an amazing wide selection of films and old cameras! This includes Polaroid cameras and film also! Their Podcast is amazing and I find that it is so good that I now have it running all day while I am working at my gallery in Pawleys Island. Good Stuff, check them out here: Film Photography Project.

Whatever film you decide to use you will be pleased with the results. Processing is easy to do with a VERY small investment. You will need:

Film Camera
Film
Chemestry: Developer, Stop (you can use water), Fixer and water bath with a Wetting Agent. $40 to get started

Film drying hanger clips $3 for a bag of 2
Film tank, either stainless steel or a Peterson. Peterson tank and reel is about $40
Film tank reels (if stainless do not skimp on these). Hewes Steel are about $25 each
Dark changing bag to move the film from the canister to the developing tank. $40
You will also need some way to scan your film into a digital image or pay someone to do it for you.

That is it. It normally takes me about an hour to develop 2 rolls. I will let them dry for several hours then cut them into strips of 6 and put them into plastic storage sheets.

For scanning, as I said above, I use a Nikon 4000ED film scanner. As you can guess from the name it will scan at 4000 dpi and has a lot of adapters for different types of film scan feeders. It has slide auto feeders, single slide feeders, a 6 position film rail for troublesome film and an automatic roll feeder to scan entire rolls automatically. If you couple this with VIEWSCAN software you have an amazing scanning system that rivals those that pro labs use!

Nikon 4000 ED system

Ok, lets take a look at the results of 3 types of film in 2 cameras!

Pawleys Pier M7 Elmarit 28 Rollei IR400 film in Rodinal at 1:50 240 second exposure

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

Eastman Double X Film – 1962 Petri 7S – Rodinal 1-50

1962 Petri 7S, Eastman Double X film in Rodinal at 1:60

Rollei IR400 Film – Leica M7 50mm Lux – Rodinal 1-50

Rollei IR400 Film – M7 28mm Elmarit – Rodinal 1-50

Rollei IR400 Film – M7 50mm Lux – Rodinal 1-50 240 second exposure

Rollei IR400 Film with R72 IR Filter – M7 50mm Lux – Rodinal 1-50

Rollei IR400 Film – M7 50mm Lux – Rodinal 1-50

I hope that you enjoyed this post and its associated images. I have been using film since I was 9 years old. At 13 I had my first darkroom at home. I worked in film in my own darkroom until I was 18 when that period of my life can to an end. 42 years later I re-engaged film photography again and cannot help but ask “Why did I wait so long?” I have been shooting digital since my career at Eastman Kodak when you could ONLY get B&W digital camera systems! I have spent fortunes on digital and have loved every moment of it. Film will NOT take any of that away, I still have digital and continue to use it. But I have to be honest and admit that working in film again fills me with a sense of peace that I have not experiences in a very long time….

Please let me know what you think of this post!

May 3 2014

Leica M240 Digital..

Oh, No… Another Camera System…

Leica M240 24 mpx Digital

Well, in a wild turn of events I have picked up some new camera equipment… This is a really no surprise as it is a sickness or rather addiction! But onward and upward!

I do have to tell you that I am REALLY excited over acquiring these new systems though. And unfortunately, one thing has let to another and thus a long journey has also been started into the realm of film again!

But first let me highlight the “What”!

As you can see in the top image, the newest body is the new Leica M240 24 full frame 24 mega pixel body. It also has a true “live view” which allows use of all sorts of other lenses like the Leica R series that you would NOT normally be able to focus. This means everything from long telephotos to true macro (subject of the next post!). After a few months of use I can tell you that this is the BEST digital system that I have ever used! Along with it I also picked up several lenses.

Leica 50mm Summalux ASPH f/1.4

First, the main lens is the Leica M 50mm f/1.4 Summalux ASPH lens in silver. This is a HEAVY lens. If attacked by a bear I could use it to beat him half to death. The lens itself has turned into my main lens that I use 60% of the time. It has a built in leans hood and takes 46mm filters. The Bokah that this lens can generate is amazing beyond description. It is extremely smooth and easy to use and generates images that are truly amazing!

Tulip at f/1.4, Leica 50mm Summalux ASPH

Tulip at f/1.4, Leica M240 w/ Leica 50mm Summalux ASPH

Leica 28mm Elmarit ASPH

The next lens is the Leica M mount 28mm f/2.8 Elmarit ASPH. This is a TINY light lens that takes 39mm filters. These smaller filters sized considerably cut the cost of purchasing top of the line B+W filters. Since the M240 camera is a full frame sensor the 28mm really is 28mm! The lens is sharp beyond words and quick to focus. I am really please with this lens and use it for landscapes and lightning photography when mounted on my Fuji X-T1 camera.

The example image for this lens below is a texture overlay. The main image was an Infrared image taken by placing a R72 (720nm) infrared filter on the lens giving a white IR image of a palm leaf, then doing a texture overlay of colored flowers.

M240-1916-Palm Overlay-2014 in both 720nm Infrared and Color

Leica Macro-Elmar-M 90 mm f/4

The next lens is the Leica Macro-Elmar-M 90 mm f/4 and its macro adapter with split image view. This is a very unique lens in that it collapses for storage. By itself it is a great 90mm lens and has proven useful for mid range subjects as well as for Infrared work with the addition of a R72 IR filter. When you add its macro adapter (extension tube coupled to a viewfinder modifier) it will then give you macro capabilities down to a 1:3 image ratio! Below is an example of a macro image shot with this lens last week at Moore Farms in Lake City .

Leica Macro-Elmar-M 90 mm f/4

Now, I already had my two Voigtlander M mount lenses that I was using with the Fuji systems, but they are M mount!

Voigtlander 75mm f/1.8

First is the Voigtlander Heliar 75mm f/1.8 Lens. This is an amazing lens that is very fast at f/1.8. The focus is smooth and long and it works very well with M mount extension tubes for true macro work (1:1 image ratio). I do have 3 of the 10mm extension tubes for it as well as a Canon 500D closeup lens. For my really small stuff this is my goto lens. It is a little long but has a very nice clam on lens hood. While it is NOT a Leica lens it is very close in terms of quality and ease and the f/1.8 aperture gives lovely bokah!

Here then is an example of a 1:1 life-size macro shot with it!

Green Dots…

Voigtlander 12mm Ultra Wide Hellar

The last lens that I am going to talk about here is the Voigtlander Ultra Wide-Heliar 12mm f/5.6 Aspherical M Mount lens. Another heavy all metal lens with remarkable focus and DOF. Since it is so wide you can almost have a DOF from right in front of the lens out to infinity! Plus 12mm is really 12mm on the camera! Given that the camera is both full frame and has a live view you can see the power of using this lens and the ease of composition and focus!

In the example image below please notice the extreme range of the depth of field!

Stormy Seas, down low and dirty… Voigtlander 12mm

As you can see, all of the system components are extremely high quality and easy to use giving stunning results. I like to create Long Exposure and Infrared images as well so I thought that I would share some of them with you below.

Pier, Leica M240 60 second exposure

M240 w/ R72 IR Filter

Leica M240 w/ 28mm Elmarit

6 Shot HDR, Leica M240

Blue Hour in B&W, Leica M240, 60 second exposure

Low Tide, Leica M240, 45 second exposure

I hope that you enjoyed this post. I will have several more shortly in the future highlighting more of this system as well as some new FILM work!!

Stay Tuned!

Dec 28 2013

How to get the BEST B&W images out of your Infrared camera!

Final B&W Version!

I am VERY particular in how I process my images, either color or IR it doesn’t make any difference! This comes from years of visualization, photography, a career at Eastman Kodak, endless hours of post processing and just plain being old and cranky! I look for specific compositional elements in each and every image I create then look to create a stepped series of varying contrast levels to draw the viewer into the image. This is important in my color work, but CRITICAL in my B&W images.

This post though, is specifically about B&W IR post processing. But before we actually get to that point I wish to share with you my workflow that I go through up to the point of processing it for B&W.

Assuming that our images have been edited for choice and artistic content and been processed from RAW to 16 bit TIFF…

I evaluate each image to see if it is viable as a processed RAW image. This means that it has been converted to TIFF, then evaluated as is. If it looks good (nice bronze skies and monochromatic leaves), I will then post process it according to the the same workflow below that I use for B&W and save it. Then…
Convert the image to Faux Color IR but running the Faux Process (channels swap and color saturation & hue adjustments) and save.

Step 1 Evaluate the RAW image to see it it stands on its own!

Step 2 Process the RAW image into Faux Color.

Only when these steps are completed do I start my B&W conversion and processing. The reason for this is that the best B&W conversions are generated when we have gotten the best possible color adjustments done! The better the colors the better the B&W! This is true of both color camera or an IR camera.

As you can see from the B&W image above of the bone yard at Cape Romain here in South Carolina, the image is full of alternating contrast areas that draw the viewers eyes into the image from the bottom left corner up to the center. This was a choice made in post processing.

So remember, you will get a much better B&W image if you first post process the color version! This will give the software (Nik’s Silver EFX Pro) a greater latitude of colors and contrasts to work from rather than just converting the RAW version directly into B&W.

Compositional Elements

In Infrared photography, there are 3 main elements that we need to get an emotionally charged image:

Sky with moody cloud structure.
Water
Green plants.

If you can get all 3 you will get a much more powerful image, but as long as you can get at least 1 you will have more to work with to get a good image. If you find yourself in a location where none of the 3 desired elements can be found then look for repeating patterns! Look at the example below. This image is of old Rt. 66 through the west taken at the height of a world class snow storm a few years ago in 720nm IR. There is no water, clouds or plants to work with. But we have a vanishing perspective due to the repeating telephone poles plus great structure in the snow cover scrub! There is also just a hint of the sun behind the top of the first telephone pole which adds interest and change of contrast.

Old Rt. 66. A hint of sun behind the top of the first telephone pole. 720nm IR

Now, as easy as all of this sounds, it really does take some planning and simple photoshop skills. Plus the more you practice it the better and faster you will get!

So lets take a look at our sample B&W converted per post processed B&W image below. To get to this point, you take your color image and open it in Niks Silver EFX software filter. You would then choose the recipe that you like the best from the left hand menu watching the effect on the preview image on the screen. When you find the version you like the best you would then adjust the contrast, structure and highlights/shadows to get your starting image, then accept it and drop it back into Photoshop!

This then is the results of what we just did:

Adams Mill Bridge, IN, B&W Converted NO Post Processing!

This is a very nice image to be sure! But, it can be drastically improved with very little work. By selecting areas of alternating contrasts we can enhance the emotional impact of this image and draw the viewers eyes into the image giving it an almost 3 dimensional feel! Lets take a look at these areas!

Take a close look at the image. Look for ways to give alternating areas of light and dark, low contrast and high contrast. Use these areas to create steps into your image. For the image above of the Adams Mill un processed this is how I approach it:

Visualizing areas of light/dark, low/high contrasts to step your viewer through the image!

Looks like a puzzle doesn’t it! But is is really easy once you decide HOW you want to approach the image. We are going to use the Nik plugin filter called Viveza to accomplish all of these changes. Simply start on one edge of the image and work your way across. Nik gives you a very powerful selection and masking tool call selection points. These points pick out areas of similar color or shading.

So here is how it all works:

Start Nik Viveza in your editor.
Start from one edge and work across the image.
Using a selection point, place it on the first area to be edited.
Adjust the size if the selection point as necessary.
Adjust the brightness slider to set the light/black point you desire.
Adjust the structure (sharpness) with the structure slider.
Adjust the contrast with the contrast slider.
If you find that your edits affect areas outside of your desired area simply add another (or several) adjustment points with no editing in those affected areas to bring them back to where they were. This is called an anchor point. You will find that you will add anchor points all over your image to bring areas back to their un edited version.
Simply work your way across the image editing as you go. Create areas of alternating contrasts and you will generate a powerful B&W image in very little time!

Here is the finished version of the image above!

Adams Mill Bridge, IN, B&W Converted Post Processed

Go back and forth, look at the differences between the 2 images. In the 2nd image, there is a tonal range of complete black to complete white. The un-edited version has a little contrast but lacks punch and it does NOT have a complete tonal range!

This looks very simple doesn’t it! Well it is!! It just requires that you pre visualize what you desire in your finished image then simply make it so.

I hope that you enjoyed this simple tutorial. If you would like an enhanced version with complete step by step instructions and screen captures please visit my BLOG at:

http://www.markhilliardatelier.wordpress.com

and look at the post on my Color & Infrared Video Post Processing Tutorial on a 2 DVD set.

Please let me know what you think of all this!!

Dec 16 2013

Fuji X-E2 Long Exposures and Wild Sunsets!

Every Time I take the X-E2 out I am amazed…

Fire In The Sky, X-E2 w/ 18-55 and 3 stop soft grad ND on the sky.

We have been having amazingly turbulent weather here in Pawleys Island for the last week or so. The sky has been moody and dark. Mornings filled with dense fog and the ocean surf rough… Perfect for long exposures and wild sunsets!

What better excuse then to take the Fuji X-E2 out and capture these wild and moody scenes? With my full kit of the Lee Seven 5 filters and B+W ND filters in hand I grabbed the X-E2 and the XF 55-200mm F3.5-4.8 Zoom Lens (which has kind of turned into my main carry around lens) and headed out to the beach.

The X-E2 (in fact, the entire line of Fuji X cameras) is exceptionally adept at long exposure photography. It generates low noise exposures and has NEVER let me down. I usually shoot in the 2 to 4 minute range but once in a while will go up to 10 to 15 minutes depending upon the subject.

In todays post I am shooting between 30 seconds and 4 minutes and one of the sunset images was just a short exposure (1/13).

The setup for all of the long exposure water images was either a 6 or 10 stop B+W ND filter and the sunset had an added 3 stop soft graduated Lee filter (Seven 5 system). The sky was just too bright with the wild colors to give anything but a black foreground otherwise! I also used the Fuji RR-90 remote shutter release (but you can also use a mechanical release or a Canon RS60 E3 release).

One of the big benefits of the Fuji X system is the fact that when in the BULB mode Fuji gives you a count up timer on the LCD screen so that you can easily time your exposure. This doesn’t sound like much but when you are out in the cold and dark shooting it is a BIG DEAL! Try doing this with a Nikon 300 and you will understand!

Now, lets talk a little about your exposure metering.

You can (and I sometimes do) use the cameras metering system, but I do find that when metering through the 10 stop ND that it will sometimes confuse the meter.
You can also meter without the ND attached then attach it and adjust the exposure for whatever value the ND is but there is NO guarantee that the filter is actually what it is advertised to be!
What I like to do is to use the Seikonic 758DR spot meter which can factor in the ND filter automatically for you and give you an accurate exposure. You can also meter through the filter with the 758 to see what the real value of the filter is!.
You can also just get close with your first exposure then evaluate your histogram and adjust the exposure as desired.

Which ever way you choose you will be surprised how quickly you can get “on target” by taking just 1 exposure then adjusting! But remember. when we are spot metering either in camera or in an external meter whatever spot you are metering on will give an exposure for Zone 5 or 18% grey. It is up to you to adjust the exposure up or down to place it into the proper Zone! What I like to meter on is the sky just above the horizon then adjust it up about 1 stop (move from Zone 5 to Zone 6).

I ALWAYS have the Long Exposure Noise Reduction turned on in my cameras. This means that you will double your exposure time. After you take your image, the camera will close the shutter and take a 2nd one with the same shutter speed. This is called Dark Frame Noise Reduction and the camera will look for bright pixels in the 2nd shot and subtract them from the first. This is very worthwhile and will allow you to create much better output images but cut down the amount of time you have to stand there and shoot!

As I said earlier, the mornings have been very foggy so lets start off with several examples of this type of photography. Of course, you must remember to increase the exposure so that the fog is not a DARK GREY, these have been adjusted from Zone 5 to Zone 6.5 or 1 1/2 stops!

Salt Marsh in the morning fog…

Pawleys Island Pier, Foggy Morning. X-E2 with 10 stops of ND, 30 seconds.

Foggy Feast, X-E2. Sometimes simple is best!

Ok, lets move on to the evening. The intent here was simple long exposures to smooth out the surf and remove the surfers (yes I hate surfers as they are always in your shot and don’t care!). For these type of images you really need to start at 30 seconds and move up. If the sky is within 3 stops of the foreground then you do not need to add a graduated ND on the sky.

Fire In The Sky, 90 second exposure with 3 stops of grad ND on the sky and 6 stops of ND overall. X-E2. Notice the cloud movement in the sky and the smooth surf!

B&W Pier & Groin, Pawleys Island, SC 240 second exposure, 10 stop ND X-E2

Color version of above image. Notice how the sky and water are close to the same density? 240 seconds.

B&W version of “Fire in the sky”. Yes you should evaluate ALL of your images for B&W.

There is something very soothing about well done long exposures of the ocean. They really are not difficult to do and the results are worth the investment in time and discomfort (did I mention that it is winter here and I was standing on the beach in the wind?).

As you can see, the Fuji X-E2 excels in all areas of photography. It has proven itself to be a serious tool to photographers who understand its capabilities and master it functionality!

I hope that you enjoyed this post. Please let me know what you think!

Nov 18 2013

Fuji X-E2 – Amazing Quality!

My Fuji X-E2 – Just Perfect!

Shrimper Carolyn Ann, Fuji X-E2

I have to tell you that I am REALLY a Fuji fan. I have the following Fuji bodies:

X-Pro 1 – Color
X-Pro 1 – 720nm Infrared Conversion
X-E1 – Color
X100s – My walk around companion!
X-E2 – Color

I also have ALL of the lenses but 2!

I moved to Fuji after a long search for a small light weight camera system after loosing 80% use of both hands and arms. I went through ALL of the micro 4/3 systems (and even kept 2!). I sold $40,000 in Canon bodies and L glass and have NEVER looked back!

In the Fuji, not only have I found perfections but being a range finder styled system it is like going home to mom!

X-E2

I have a X100s that I use for most of my walk around work, it is just so tiny and generates amazing images. So when Fuji announced the X-E2 with the same sensor and with even more upgrades I ordered one from Amazon. Much to my amazement it shipped a week later! I have had it in hand now for about 2 weeks and just yesterday took it out to a local fishing port for a bit of creative work. I love the upgrades and how fast this camera is. It even passes the X100s in ability. I originally purchased the X-E1 in order to take advantage of its electronic remote shutter release. It enables me to hook it up to devices like a lightning trigger and my water drop collision system. The X-E1 did a great job with these devices and I expect no less with the X-E2 but that is for another day.

X-E2 Top Panel

Yesterday I took it out to shoot shrimp boats in North Carolina and have to tell you that the camera just blew me away. It is such a major upgrade over the X-E1 that I cannot believe that they came from the same company! The controls are CRISP, the knobs just snap from position to position with no play and they stay where you put them. The larger LCD is nice but the faster EVF is a sight to behold. I dressed the camera in a RRS L bracket with grip and put on a nice soft release. Physically except for new buttons and placement the camera is identical to the X-E1. One MAJOR improvement is the addition of 3 stops of EV adjustment instead of the normal 2 that Fuji has provided in the past.

All in all I am really happy with this upgrade. I will keep the X-E1 and convert it to 800nm IR in the near future. There is no sense in letting that viable and great camera go to waste!

Little Scrapper, X-E2, RAW converted in ACR

Next I put the camera into the JPG mode and shot color & B&W images in camera. The results speak for them selves!

Shrimper Donkey X-E2

Shrimper Donkey, CAMERA B&W X-E2

Carolyn Ann, Color, X-E2

Carolyn Ann, In Camera B&W X-E2

Working Shrimper Deck, X-E2

Working Shrimper Deck In Camera B&W, X-E2

This posting was never meant to be a review, rather a statement of its impact upon me with sample images!

Please let me know what you think…

Sep 21 2013

Fuji X100s: Oh Yea…

You know the feeling, and usually need tissues to clean up afterwords!

A little background is in order…

Fuji X100s

Fuji X, what can you say except “Yes Please!”. I am a LONG time X shooter. I started out several years ago with the Fuji X100 and loved every moment of it. I likened shooting with it to going home to Mama… If you know what I mean then you understand. I did decide that I really desired to have a camera with interchangeable lenses and when the Fuji X Pro 1 came out I jumped on it and all of the FX lenses that have since arrived plus several CV lenses as well. The X Pro 1 has become may main goto camera system. I Then purchased the X-E1 due to its electronic shutter release, thus its ability to connect to my lightning trigger and water drop computer system! The X-E1 only lives for such things… When I get it out to play with lightning it is like coming home to a doggy after a long day! I then decided to get another X Pro 1 and have it converted to 720nm Infrared. This system (my 16th IR conversion) is the BEST IR camera that I have ever used and that is a big statement!

Passion Flower Macro, Fuji X100s hand held in bright sunlight.

So, along comes the X100s, and I look it over and think on it for months. I though that gee, what a neat system to add to my bag. Finally I decided to get one but let me tell you that they are HARD TO FIND! I found on at a little online camera store in Oregon and had them ship it to me last month. I am very glad I made this decision! To say that the X100S is a world class camera is really short selling its capability! I find that I carry it EVERYWHERE I go now. I still use the X Pro 1 for most of my work but the X100s really gives stunning results and the new XTran 2 sensor is amazing. I love the split image manual focus system and wish the other Fuji cameras offered it as well.

Adams Mill Wheel, Lafayette, IN, Fuji X100s

The X100s works very well in macro mode and the sharpness, colors and texture are simply breathtaking! You could not ask more of a walk around camera than the Fuji delivers. Even without image stabilization the camera is flawless due to its ability to shoot cleanly at high ISOs!

Abstract, Glass Block Floral, Fuji X100s

I am going to share a few of the images generated so far with this incredible camera and you be the judge!

The Dingy, Fuji X100s

Adams Mill, Lafayette IN, Fuji X100s

McHargue Mill, Fuji X100s

Old Truck, Fuji X100s

A Face in the trees, Fuji X100s, you have to figure this one out!

	CLiR Infrared Post P… on CLiR Infrared Post Processing…
	Caitlin D on UPDATED: IR & COLOR POST P…
	KJB IMAGES on Creative B&W Educational…
	markhilliardatelier on Creative B&W Educational…

A conversation on how to easily create amazing Long Exposures

BASIC DAYLIGHT ND Filter suggestions for after the sun is up higher in the sky or 1/2 to 1 hour before sunrise!

The MOST IMPORTANT Lesson!

Exposure Calculation Version 1

Exposure Calculation Version 2

Subject considerations

Seascapes:

As I said above this introductory tutorial is set up to be presented in 2 or 3 separate posts. Look for Part 2 Sunrise/Sunset Long Exposures and the special filters needed in about 2 weeks!

This is the next type of long exposures we will learn about creating in post #2!

As always please let me know what you think of this!

Share this:

Like this:

The Peace Of The Creative…

Slowing down creates peace on multiple levels.

For you as the photographer and for those who view your work, this has never been more true!

I am going to do a slightly different type of post this time.

We will discuss the art of Long Exposures a bit but we will focus more on the technical aspects of using ND filters to correct for different types of lighting as well as talk about good ND filter systems verses not so good, and why it is always best to invest your money in good filters!

Definition: Long Exposure – To create an image in camera with the shutter open for longer than a few seconds in order to smooth out movement over time. This can be softening the flow of water over a waterfall, flattening of waves in lakes and oceans or tearing clouds moving across the sky.

First, there are a few points to consider when thinking about using ND filters:

Ok, one last thing… I had a live group hangout last night with some of my online students and we discussed everything in this post but with more info and thoughts on choosing the correct ND filters for a number of scenes. Here is the link:

I know that this has been a long post but it was necessary to show the technical side of creating pleasing long exposures. Next time I will discuss how to meter for long exposures.

As always please let me know what you think!

Share this:

Like this:

Georgia Coast Photo Workshop

March 7 – 10, 2019

THE AMAZING IS POSSIBLE!

Share this:

Like this:

Yes, deep moody B&W can capture and hold your attention!

As always please let me know what you think, I value your input!

Share this:

Like this:

Getting your BEST B&W image!

Share this:

Like this:

The joys of returning to our photographic roots…

Film Cameras

Film

Please let me know what you think of this post!

Share this:

Like this:

Or… What I Did On My Summer Vacation!

RULE ONE: No camera plan survives first contact with a 7 year old!

RULE TWO: A super zoom really works best when you have to carry lots of glass around while traveling. See Rule One, Jordan did me a favor here!

Things to look for on a cross country western trip:

Trip Highlights!

Querimony: To Questionably Moan & Complain!

Moab, Arches & Canyonlands National Parks

General Utah

Because…

RULE THREE: There are NO GO BACKS! If you see a subject or scene on the side of the road immediately stop and shoot it!

Bryce National Park

RULE FOUR: Revisit those scenes and compositions as many times a possible!

Colophon: Very Important Lessons Learned:

Please let me know what you think of this long post! I welcome all feedback.

Share this:

Like this:

Using the Sony A7rii for advanced photographic work….

Share this:

Like this:

Going Home To Momma…

Share this:

Like this:

Perfection in Brown…

I hope that you enjoyed this short post on the Van Dyke Brown Process. You can look for more about it in the future!

Share this:

Like this:

A new (read OLD) way of printing!

Alternative Printing from History!

Look forward to many more posts on the processes as I master them!

Share this:

Like this:

Creating World Class B&W Images With Leica Monochrome

Thanks for taking the time to view these!!

Share this:

Like this:

A new camera come homes to live!

If you have any comments or questions on this post please send me some feedback and I will answer to the best of my ability!

Share this:

**BASIC DAYLIGHT ND Filter suggestions for after the sun is up higher in the sky or 1/2 to 1 hour before sunrise!**

**Getting your BEST B&W image!**